PDA

View Full Version : I need help installing S2000 antenna!!

YellowCelica_GT
02-15-2002, 10:04 AM
OK guys, i just picked up the S2000 antenna and I have no clue where to start or what to twist and what not

can somone give me DETAILED instructions on how to unscrew the stock antenna and then put on the S2000 antenna!

also, what tools do i need if any?

please be as detailed as possible...i dont care if its super long, i just want to make sure i am doing everything right!
TeeAreDeaGeeTeeEss
02-15-2002, 10:35 AM
Lefty = loosey

Righty = Tighty
DaileyDog
02-15-2002, 10:48 AM
What he said, and add some Lock Tite to the threads just to secure it a bit.

Mike
AkUmA
02-15-2002, 12:29 PM
no tools are needed, just grab the base of the antenna(metal part, not the rubber under it), and turn. should be off in a min, s2000 antenna should be on in half the time...
LEAVECIVICSINTHEDUST
02-15-2002, 12:45 PM
You need a hammer, a dildo, and an elephant. The elephant is for torque. The hammer is for hammering the S200 antennae on. The dildo is for putting up your newbie a$$
TeeAreDeaGeeTeeEss
02-15-2002, 01:05 PM
Originally posted by LEAVECIVICSINTHEDUST
You need a hammer, a dildo, and an elephant. The elephant is for torque. The hammer is for hammering the S200 antennae on. The dildo is for putting up your newbie a$$

:rofl::rofl:
00CericaRuss
02-15-2002, 02:28 PM
damn.. you guys are freakin mean
LEAVECIVICSINTHEDUST
02-15-2002, 02:40 PM
Hey look at your title..lol
00CericaRuss
02-15-2002, 03:03 PM
yeah.... but still he's a newbie... i wish this section was here when i first started posting
Diesel949X
02-17-2002, 12:48 AM
Originally posted by DaileyDog
What he said, and add some Lock Tite to the threads just to secure it a bit.

Mike

...so some punk @$$ can do more damage when they try to steal it???
R K e 1 C A
02-17-2002, 01:32 AM
I read a really good idea about a member craving his name in his. If you don
MeGaXmAn27
02-17-2002, 02:23 AM
yeah..put some lock tite.. some queer stole mines when i parked it for 10 mins.. if i got back earlier.. i would have took out my bat in my trunk and my shank
zMaN
02-17-2002, 08:26 AM
I will be nice.

At the base of the stock antenna the antenna is not totally round. The antenna is flat on two sides. grab it with your fingers and turn counter-clockwise. If it is too tight then grab the flat sides with a pair of pliers. After it is removed just screw in the s2000 by hand.
Diesel949X
02-17-2002, 12:51 PM
[QUOTE]Originally posted by R K e 1 C A
[B]I read a really good idea about a member craving his name in his. If you don