PDA

View Full Version : Running a NX Ntercooler


Oo DaRk StAr oO
12-06-2003, 11:14 PM
So I will be installing this next week. I have a few questions about this.

I need to purchase an Arming switch and purge switch and suggestions, and also I need wiring, any suggestions?

Calsoldier
12-06-2003, 11:46 PM
What do you mean by arming switch? I believe the swith comes with it. You don't need the purge either, as you can just close the bottle and spray whatever you have left in the lines right onto your intercooler anyways. It's not like you're adding fuel, or nitroust to the engine. It will be the same as purging basically. You won't need anything else besides the kit itself.

Oleg

Oo DaRk StAr oO
12-07-2003, 12:18 AM
Its a used kit. The only thing it dosent come with is switches and wiring.

Calsoldier
12-07-2003, 01:07 AM
Then you can just goto any Radioshack, Kragen, etc and get a switch for the kit, and some wires. THat's about all you'll need. If it doesn't come with the relay, then I would suggest you get one too.

Oo DaRk StAr oO
12-07-2003, 01:55 AM
I wonder if NX has any goodies. I was thinking about selling the 5lbs bottle and purchasing a 15lbs bottle.

RichGT
12-07-2003, 02:58 AM
sorry to go offtopic but damn Oleg, your 1/4 improved A LOT with your nitrous. More than almost 1.5 seconds improved. Nice!

Dj_cElicA
12-07-2003, 07:09 AM
i have a NX window switch if u want it.. dont know if u would use it for the Ntercooler or not..

Calsoldier
12-07-2003, 10:33 AM
Originally posted by RichGT
sorry to go offtopic but damn Oleg, your 1/4 improved A LOT with your nitrous. More than almost 1.5 seconds improved. Nice!

I had burned valves when I ran at the track previously. I didn't know about it, until I did a compression check. Swapped in some new valves and it was all better, but the nitrous did help. My main problem was not landing in lift before, but with nitrous it really doesnt matter.

Oleg

Oo DaRk StAr oO
12-07-2003, 10:41 AM
Originally posted by Dj_cElicA
i have a NX window switch if u want it.. dont know if u would use it for the Ntercooler or not..

Will this work for me?

marc
12-07-2003, 10:49 AM
Why don't you just run a 20shot or so (or whatever the smallest shot is you can get)?

That way, you use less nitrous per spray, you get the same chilling effects, AND you get 20 (or 35 or whatever) horses to the wheels.

beeseries
12-07-2003, 12:52 PM
why not run an intercooler sprayer? Using a setup similar to the sti, u can even put alcohol in there too.

Calsoldier
12-07-2003, 01:13 PM
That's what the Ntercooler is. It's a nitrous/c02 intercooler sprayer.

Oleg

Oo DaRk StAr oO
12-07-2003, 01:30 PM
So will that switch work for me?
Thanks for all the help.

Dj_cElicA
12-07-2003, 01:38 PM
i guess it would work.. so u dont have to worry about spraying when u dont want it to spray.. and hands are free when racing.
pm me if you want it, will sell for cheap since i got it used also.

Oo DaRk StAr oO
12-07-2003, 11:06 PM
As long as it works. I really want it to be hands free.

Calsoldier
12-07-2003, 11:36 PM
NX switches dont work on some cars. I think the celica is one of the ones with which it doesn't work. Check if your car is a 12v tach system or 5volt.

Oleg

143hawaii
12-08-2003, 04:57 AM
Why don't you use a boost activated switch rather than a window switch. Using a window switch alone wouldn't make sense to me, you'd be spraying your IC with nitrous even when you're cruising around and not necessarily pushing it. You'd run your tank dry instantly. Or could you try using a combination off a boost activated and WOT switch so that you could make it only when for example your car is boosting 7+ psi and floored.

Just a thought.

Dj_cElicA
12-08-2003, 11:21 AM
it works if u hook a relay up to it.. cmiguel32 had it done like that in his GT.. i baught the switch off him and now i can't figure out how to wire it.. so i got my brother to get mallory switch for christmas.

and it only works if the arming switch is on, and after 3k rpm.. and shuts off at 6k rpm (u can buy pills for different rpms)..so u wont spray all the time.

Oo DaRk StAr oO
12-08-2003, 01:13 PM
Thats the thing. I am running the Top mount for a little longer and it heat soaks really bad.

satur9
12-08-2003, 03:12 PM
the wide open throttle or boost switch is what you relly need . the new sti have a maual button for thier water sprayer it just cools it down between runs. hope your using co2 which is cheaper.water is even cheaper the latest issue of scc tell you how to build a water sprayer for like 30 bucks.