View Full Version : TRD Perm Ait Filter Install
neorowen
03-23-2004, 02:48 PM
Ok, I have the airfilter and it's preped and ready to be put in, but I honestly have no idea how to install it or where it goes.
Can someone give me some instructions?
Celica NZ
03-23-2004, 05:42 PM
for the best performance put it into the trunk, just below the TRD sticker on the rear window
2002GT_Celica
03-23-2004, 06:11 PM
Put it inside the exhaust pipe. It works as a jet propulsion system.
CeliKill180
03-23-2004, 06:18 PM
airbox
Gunmetal Grey
03-23-2004, 06:21 PM
When you pop the hood, you'll see a big black box, with a big black hose. Disconnect the hose by undoing the silver buckle, and unclip the top of the black box. There are three clips, one of them is behind it, so you have to dig around. After that, remove all the hoses, and the MAF, and you should be able to lift off the top of the airbox. Replace filter, and bam, you're done.
Gunmetal Grey
03-23-2004, 06:23 PM
Look for the butterfly removal how-to. It tells you how to get it off. Should be in the installs section.
neorowen
03-23-2004, 06:46 PM
Thanks Gunmetal, that's the info I needed.
CeliKill180
03-23-2004, 07:34 PM
Originally posted by neorowen
Thanks Gunmetal, that's the info I needed.
hey, what about me
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.