mo' stuff foe sale

[Avenge2c]

Well here is some of the last stuff I have off the car for sale-All parts are used but still in very good shape
CF trunk handle- w/o key hole $80 Plus shipping, and you handle

Razo shift knob - $30 plus shipping
http://www.newcelica.org/photopost/data/500/11140DSC00317-thumb.jpg
TRD SS - $100 SHIPPED

No pics of this yet but it is just the lever-

Hotchkis coilovers with front STB and rear camber arms - $1000 plus shipping
http://www.newcelica.org/photopost/data/500/11140DSC00379-thumb.jpg
(PM me about this for pics)
I'll get pics up in a min.............. all prices are open for bids and offers!

[mkeomec]

dibs on shift knob, can you take a pic of it? or is it the blue in the lower pic, thanks

[TRlPPlN]

ill take the shifter bushings!!

[Avenge2c]

yup its the blue one in the last pic- you cen see it better in the gallery if you go there and look at my pics I didn't want this thread to be huge so I just put the small pics in
Thanks Brad

[Avenge2c]

http://www.newcelica.org/photopost/data/500/11140DSC00317-med.jpg

[rapture]

do you need your gts shift knob back =P

[margauex]

considered me for the CF pieces

PM sent

[Kry]

Originally posted by Avenge2c
Hotchkis coilovers with front STB and rear camber arms - $1000

I'll take it
pick up!

[Tronix]

will you take $100 shipped for the chrome rings?

I'm assuming these are:

4 for the a/c vents, 2 for the a/c controls, 2 for the tweeters, and 1 for the cigarette lighter?

-Tronix(wheel'n deal'n)GT

[Avenge2c]

I'm trying to get atleast $120 shipped for the rings- You are correct on them except the ac controls are for the hazard controls next to the stearing wheel, not the AC.

I'll have to tell you about the coilovers- there are two broken bolts on the adjusting collors. There really isn't a probelem with them since the weight of tha car will keep them from adujsting. One of the rear struts is also starting to strip out :( You can still put ti all together and probabnly drill out the broken bolts then put new ones in and it'll all be fine- but I'm not keeping the car and I need the money
THESE COILOVERS ARE WORTH ALOT MORE THAN $1000, ESPECIALLY WITH THE STB AND REAR CAMBER KIT!
PM me and I can get you some pic's of each individual piece I'm talking about.

[GTS-Smooth]

Is the Trd Short Shifter brand new? if it is i got dib =)

[Avenge2c]

uh no, its been on the car for about a year- not like they really wear out though-

[genax]

dibs on the cf engine covers for now. got any larger pics of same? are there any scratches dents, minor imperfections. please send to jy_7@yahoo.com

[Belly]

2nds on the shifter bushings

[margauex]

Engine Covers still forsale???

[Avenge2c]

I think the bushings are the only thing sold (just pending payment)- Make me an offer via PM and I'll let you know where you are on the bidding- either when I get what I want for the parts or at the end of next week I'll be ready to ship this stuff out. All thes small thumbnail pic's are from the nc.org gallery so just check it out for the larger pics! Thanks Brad

[Kry]

Originally posted by Avenge2c

I'll have to tell you about the coilovers- there are two broken bolts on the adjusting collors. There really isn't a probelem with them since the weight of tha car will keep them from adujsting. One of the rear struts is also starting to strip out :( You can still put ti all together and probabnly drill out the broken bolts then put new ones in and it'll all be fine- but I'm not keeping the car and I need the money
THESE COILOVERS ARE WORTH ALOT MORE THAN $1000, ESPECIALLY WITH THE STB AND REAR CAMBER KIT!
PM me and I can get you some pic's of each individual piece I'm talking about.

yea that's fine.. :) i'll take it..

shot me a e-mai with picture..

joe@chiang.com

[Avenge2c]

Got ot get some batteries forthe digi cam- then I'll send out the pic's
All the small pic can be inlarged by going to the gallery and clicking on them

[TRlPPlN]

Paypal sent dude.

[Avenge2c]

bushing are sold and willship tomorrow, thanks-
"Low ball me and I will ignore you!"
That is all, thank you :)

[ShadyMilkman]

I'm interested in the hotchkis rear camber kit if you want to sell it seperte from the coils.

[Avenge2c]

I'm not going to part out the hotchkis camber stuff,these parts are needed by the guys buying the coilovers and there have been a couple offers on the whole think so thanks but no. Sorry,

[margauex]

Did u get my PM on the engine covers?

I responded first about them.

[Avenge2c]

Ya man I thought I answered you? I have the ones in the pic, there is a diff one for the GT and the GTS. The valve covers are diff so if you have the GT then y9ou won't be able to use all of the ones I have . I have a GT-S set TIA Brad

[Avenge2c]

**TTT**

[Avenge2c]

trim rings are sold and thr top post is updated- still need to sell the knob, CF engine covers, TRD SS, Hotchkis stuff

[Avenge2c]

can'tchange the title but I also now have the front motor mount that skreamin' makes and a cf rear hatch handle

[Avenge2c]

new update-What I have left-
CF engine covers for a GT-S
Razo shift knob (blue and CF)
TRD SS
Happies engine ground wires (red)
solid front motor mount
Hotchkis TVS minus sway bars
AEM CAI (blue)
Custom dual exhaust
Hyper motive rear lower tie bar (blue)
Gauge bezel with CF trim and brushed aluminum speedo ring
PM me for pics, I would need some stock parts with some money for a couple parts- I need to sell this stuff to get money for my new ride- make an offer

[ajaynceli]

how much for the CF trunk handle

[castrogtstoyo]

I want the c/f handle and motor mount Hoaw much?

[Avenge2c]

I hate to say it but who ever has a carbon blue celi has the best chance on the handle- I don't have the stock one any more. I sold/gave it away so they supposedly could do more testing and get the CF ones produced faster and better- no dice I heard these things were discontinued so they are RARE! (make me an offer on it)
The mount I would need yours and since I have no way to drive the mount to post office with out yours I need it first- sorry- I'll let the mount go with next day air and you mount for 85 bux? Not sure what they go for but I know I paid about double that and these things won't go bad! Bill did an awsome job on them Thanks Brad

[buzz]

Dude pm'd you!!

[Avenge2c]

email sent- pics are here in the gallery- (gotta say this was a great idea and helps so much!, ya I'm nut huggin but damn it's helpfull to be able to host pics here! best of all its FREE!)
http://www.newcelica.org/photopost/data/500/11140DSC00380-thumb.jpghttp://www.newcelica.org/photopost/data/500/11140DSC00379-thumb.jpghttp://www.newcelica.org/photopost/data/500/11140DSC00377-thumb.jpg

[buzz]

thanks..sent you another pm & email

[margauex]

Originally posted by Avenge2c
Ya man I thought I answered you? I have the ones in the pic, there is a diff one for the GT and the GTS. The valve covers are diff so if you have the GT then y9ou won't be able to use all of the ones I have . I have a GT-S set TIA Brad


Who has a GT I have a GTS........

[Avenge2c]

ok good, then buy these covers! People keep asking about them then never pay up- I'll ship them any where for $265 just tell me your ready to pay!
Anyone have a carbon blue stock handle? Maybe black or the other light blue even?

[Avenge2c]

come on poeple, I have offers and then no one actually wants to pay up- lets go so I can get the new ride please!

[TRD-CELICA-GT02]

How much you asking for the Carbon Fiber hatch handel? PM me with the price range you want.

[Avenge2c]

well that would depend on what color you have, since I will need one to put on if I take this one off- I'll throw this out there though- it should be worth over 80 bux! I mean come on someone offered me 50 for this? I think it's worth more than that, its very hard to find and look great- as long as you don't have the fake CF garnish!

[evil eye]

:werd: Don't lowball the man, I got close to $70 for my CF hatch handle, and that thing needed to be re-clear coated and one of the bolts was stripped. I would demand at least $100 if yours is mint. ;)

Too bad I'm so poor, I'd snatch those CF engine pieces in a sec. Everytime this thread gets bumped, I get so tempted. :D

[Avenge2c]

Well I still have them and they are ready to ship............ so keep me in mind :)
Thanks for the word on pricing, mine is in mint condition! Just like the door sills and TRD gas door I sold- You can talk to those guys if you want to know how well I keep my stuff- pm me and I can get there info for you.

[genax]

got several pms.

[Avenge2c]

yup, multiple PM's and the CF engine covers should finally be sold- I'm ready to move this stuff out so any good offer will take it-
Genax- not sure what all you were talking about- I do still have the Razo knob but what other thing did you want to know about?
Thanks guys Brad

[Pete00]

brad the cf pieces are mine :)
paypal sent :)

[evil eye]

Lucky s.o.b! :gap:

[Pete00]

Originally posted by evil eye
Lucky s.o.b! :gap:

:P

[Avenge2c]

bump-&- pm sent to pete00

[lilchinoboy03]

will the TRD SS fit an 03 GT?

[Avenge2c]

Yes, its just the lever. You can put it in any car as far as I know. My '02 GT-S had a slight problem- when you put it in reverse you would bump the parking brake when it was down- other than that its great!

Heres pics of more stuff FS:
Ground wire kit
http://www.newcelica.org/photopost/data/500/11140DSC00382-thumb.jpgRAZO Shift Knobhttp://www.newcelica.org/photopost/data/500/11140DSC00317-thumb.jpg
Gauge Bezel
http://www.newcelica.org/photopost/data/500/11140DSC00383-thumb.jpg

[TRD-CELICA-GT02]

Wish I had a carbon blue Celica so I can get that CF Hatch Handle off you. 80 bucks is a freakin good deal!!! :(

[Avenge2c]

get your painted :) Shouldn't be more than 20 bux, and you'll still be getting a hell of a deal on it!

[Avenge2c]

bump- come on people I still have some stuff for sale-
ie- coilovers, hatch handle, gauge bezel, TRD SS, solid fornt motor mount (trade for stock one and 45 bux?)

[Avenge2c]

gauge bezel sold locally for 20 bux, ground kit,shift knob and TRD SS still FS!
Hotchkis also!!!!!!!