Minimum Thickness on Stock Rotors?

[kaioshin]

What's the minimum thickness for the stock rotors? I read that it should be on the side of the rotor, but that's got a nice coat of rust on it which makes it kinda hard to read. :)

I reason I ask is b/c I have a HPDE coming up and want to make sure brakes are up to the job. I plan on flushing the brake fluid next week and I will most likely buy new front pads as I just replaced all corners a few months ago.

Thanks!

[Blue Bomber]

Front
Standard: 25mm (0.984in)
Minumum: 23mm (0.906in)

Rear
Standard: 9mm (0.354in)
Minimum: 7.5mm (0.295in)

[kaioshin]

Originally posted by Blue Bomber
Front
Standard: 25mm (0.984in)
Minumum: 23mm (0.906in)

Rear
Standard: 9mm (0.354in)
Minimum: 7.5mm (0.295in)
As always, you are the first to answer. :chuckles:

Thanks for the info! Now, I just need to find a ruler. :laugh:

[00 scrub]

Ouch a ruler, get a nice set of calipers, or hell a cheap set, it will make it easier and more exact.

[kaioshin]

Originally posted by 00 scrub
Ouch a ruler, get a nice set of calipers, or hell a cheap set, it will make it easier and more exact. :rofl: true true. I'll see if I can pick something up.

[kaioshin]

Well, measured them with a clamp-like device. Fronts are .97 and rears are .34

Thanks BB! :thumbup: