PDA

View Full Version : ATTN: Skamikaze


EbonyGT4me
11-15-2001, 10:21 PM
Hey man,

As you know, I bought the K2 Vision HID kit. I installed the lights this week and I'm having some problems. Firstly, I barely have any light being emitted in front of the car. I installed the kit without using any rubber washers and I'm wondering if that could be the problem. I'm thinking the bulbs may be too far inside the housing and causing the problem. I tried to re-aim the headlights and that had absolulty no effect. BTW, do you re-adjust the lights by turning that metallic type dial? I had the PIAA x-treme whites in the car for a while and I have to say, as it currently stands, those bulbs were brighter. Any insight you can offer would be apperciated. Thanks.

skamikaze
11-16-2001, 03:18 AM
did you use any spacer to secure the bulbs behind the spring clip? if they were loose, id say thats your first problem because they could easily bounce out of the housing.

as for adjustment/aiming...it is NOT that disc thing. its actually a long skinny screw/bolt covered with a long plastic cylindrical piece (it should be the loose one that spins around - one on each headlamp). you have to get a pair of pliers or something and pull off the plastic. then it reveals the bolt. get a socket wrench and turn to adjust. its in the TSB the guy posted a while back...