ATTN: Biilybrun,GTSNUT..etc..(Custom exhaust ?)

[jonnyc]

everyone who has a custom exhaust that is straight through the control arm and not around can you please explain how you did this

ive been looking and trying to figure it out. i can see it being possible with a bit of a bend over the arm but i cant see it being able to go straight thru can any of you guys post pics of exactly how this is setup

thanks you

[Bo]

I got pics that I'll post when I get home that will show the set up from underneith

------------------
<IMG SRC="http://wsphotofews.excite.com/028/TN/6e/8R/r014277.jpg" border=0>
AIM: GetNBizy <IMG SRC="http://www.newcelica.org/ubb/smilies/cwm13.gif" border=0>
Bo Studios (http://www.geocities.com/gtsnut/bostudios.html)

World Racing (http://www.world-racing.com)
Club Toxxic (http://clubtoxxic.homestead.com/index.html)

"Am I sprayin? I'm sprayin so much gas, you would think you were on death row."

[jonnyc]

please post asap!!

[billybrun]

$hit I forgot to take a pic of mine the other day. You know it's not completly strait, it's the most strait you can possibly get it.

------------------
<IMG SRC="http://brun1.home.mindspring.com/My%20Car/mysig3.jpg" border=0>
Best 1/4 mile time of 14.152@97.69

[billybrun]

Here my setup.
<IMG SRC="http://brun1.home.mindspring.com/My%20Car/Muffler.jpg" border=0>

------------------
<IMG SRC="http://brun1.home.mindspring.com/My%20Car/mysig3.jpg" border=0>
Best 1/4 mile time of 14.152@97.69

[Keyshawn]

billybrun,
how loud is your exhaust?

[RedNOSceli]

I really do suggest doing it right and having the pipe bent around and ran through were the stock pipe pops out of the muffler...If you go through the control arm, you will hit it. That pic has less then 2inches, and I promis it will move more then 2inches on serious turns.

------------------

2000 Celica GT-S Red
TRD SPRINGS
Revalution Exhaust
N.O.S wet fogger 50shot (Temporarily out of Service)
Nitto 450 tires
Clarion Head Unit
AEM Cold Air Intake
*NEW* B&M Shifter



AOL/Instant Messanger users IM me at FearFire69

[vvtlikick]

Originally posted by RedNOSceli:
I really do suggest doing it right and having the pipe bent around and ran through were the stock pipe pops out of the muffler...If you go through the control arm, you will hit it. That pic has less then 2inches, and I promis it will move more then 2inches on serious turns.Don't forget it is over the middle of the control arm not the end, so the tire/wheel should have quite a bit more travel (if there's a 2" clearance between the control arm and the exhaust pipe, the tire/wheel can move maybe 5" vertically before the control arm hits it). But I do share your concern about the the control arm hitting the exhaust.

------------------
<IMG SRC="http://wsphotofews.excite.com/011/X8/nT/jI/0r26961.jpg" border=0>

<FONT COLOR="#0000ff" SIZE="1" FACE="Verdana, Arial">This message has been edited by vvtlikick on November 09, 2001 at 05:20 PM</font>