Alarm Guide Available...

[BlackGTS2002]

Hi all, Just bought a $5 alarm install guide from some guy on ebay.

It lists all the wires under the dash and what they do...also gives tips on installing the alarm and some stereo ( GT only) wiring codes.

If interested...I will email it ...just post or email me and i will send.

[IRL]

Damn, u paid $5 for that?! I should jump on ebay...make a fortune with the program we use at work for car wiring. :)

If you had made a post earlier...I would have scanned you everything you need to wire an alarm/stereo/GPS/etc...

Maybe next time!

[BlackGTS2002]

Thank you anyways...

I only got it cause it was in the form of an email attatchment, so I could easily distribute it... I appreciate your offer though

[Aero2KCel]

Can you guys post the wiring diagram for the Celica GTS? I need it to wire my alarm and remote starter.

[New_Name]

hey, IRL and/or Black GTS.......please email me the info @ b_vaj2001@yahoo.com

[BlackGTS2002]

youve got mail from DJJoeJ2000@aol.com

[silvervtec2000]

Hey man!
Can you email it to silvervtec2000@yahoo.ca ???

Thanks!! oh my email address refers to my other car. Just got a celica 2 months ago!!!

Thanks!

[LEDmod]

Send me one to seanyiya@hotmail.com
I'm gona let someone install new alarm on my car... in about week.. I think I can show him this diagram and make the installation faster..
The one that I'm doing takes about 4-5 hours.... hope it can be done sooner
Thanks..

[hellr]

thanks

[jvcjbl]

12V|blk/red & white |+ |ignition harness |
| STARTER|black/white |+ |ignition harness |
| IGNITION|black/orange *1 |+ |ignition harness |
| SECOND IGNITION|blue/red *4 |+ |ignition harness |
| ACCESSORY|gray |+ |ignition harness |
| POWER LOCK|brown |- |passenger kick or BCM *2 |
| POWER UNLOCK|yellow/black |- |passenger kick or BCM *2 |
| LOCK MOTOR|blue/white | |driver kick or BCM *2 |
| UNLOCK MOTOR|blue | |driver kick or BCM *2 |
| DISARM DEFEAT|blue/red | |passenger kick or BCM *2 |
| PARKING LIGHTS +|use the (-) wire | | |
| PARKING LIGHTS -|lt. green | |steering column |
| HEADLIGHTS|red/blue |- |steering column |
| DOOR TRIGGER|red/white *3 |- |drivers kick |
| DOME SUPERVISION|red/white |- |driver kick |
| TRUNK/HATCH PIN|lt. green |- |trunk light or BCM *2 |
| FCTRY ALARM ARM|arms with lock | | |
|FCTRY ALRM DISARM|disarms with unlock | | |
| TACHOMETER|brown/white | |rear of instrument cluster |
| SPEED SENSE|white/red | |rear of instrument cluster |
| BRAKE WIRE|green/white |+ |brake switch |
| HORN TRIGGER|blue/black |- |steering column or BCM *2 |
| WIPERS|blu/yel & blu/orn |+ |steering column |
| LF WINDOW UP/DN|green - red | |power window switch |
| RF WINDOW UP/DN|blue - wht/blu | |power window switch |
| SUN RF OPN/CLOSE|not recommended | | |
| RADIO 12V|blue/yellow |+ |radio |
| RADIO GROUND|brown |- |radio |
| RADIO SWITCH|gray |+ |radio |
| RADIO ILLUMINATE|green |+ |radio |
| LF SPEAKER| | | |
| RF SPEAKER| | | |
| LR SPEAKER| | | |
| RR SPEAKER| | | |


Notes:
*1 When doing remote start, this wire must be isolated from the keyswitch with the ignition relay. See direct fax document #1077.
*2 The BCM is located just to the right side of the radio. Remove the radio to access.
*3 To avoid dome light delay, use red/yellow at the driver door pin for the driver door and red at the passenger door pin for the passenger door. Isolate each door trigger with diodes.
*4 There are 2 blue/red wires in the ignition harness. The correct ignition wire is the heavier gauge one and it has 1 silver hash mark. The incorrect wire has 2 silver hash marks.

[jvcjbl]

This previous post that I did is from a reliable source (D.E.I.) it will cover all celica's from 2000 - 2002. Hope this helps you all. I do installs as a profession so I know that this guide is reliable. They only thing I will not share is how to isolate the ignition wires when doing remote starts. I will tell you that if you don't do it, you will hose your starter. Have fun.

[GLITCH]

i just got my wiring diagram book from toyota today, cost 61.00$ its a pretty good book. i just scanned through it but it looks like what i need. hopefully now i can figure out why the buttons on my stereo dont light up but the display works fine.

[cryogenic]

Hi, can someone email me the alarm install diagram or full gen7 wiring diagram please.

Regards

Cryogenicssutcliffe@ntlworld.com

[nd4spd 4 a gt-s]

anyone have a remote starter guide for a 92 celica auto???

or know where i can get one??

[coolstorm92]

can you email it to me please: becelaere@yahoo.com
Thanks,
Dan V.

[SoMBrA]

E-mail it also to me please -> Sombra@sombra.org
Thanks a lot :)

[h0l0grafik]

hook me up h0l0grafik@yahoo.com

thank you 2!

[PJGEM]

Please send the diagram to me aswell. please i want to install my security and remote start system. enigima321@aol.com

Thanks

[SQ GT-S]

I guess I should jump on this too. Could you please send me all the wiring diagrams you've got so I can install my Clifford alarm and remote start? cstaat@chartermi.net Thanks man.

Curt

[IRL]

http://www.newcelica.org/forums/showthread.php?s=&threadid=60408

[SQ GT-S]

LOL, I didn't even see that one. Thanks IRL. On this same note, can the facotry alarm (VIP something or other) just be pulled? I don't want that stupid thing in there if I don't need it.

Curt

[IRL]

Actually I am pretty sure you will have to pull it, as they are a pain in the ass to work around on other Toyotas I have dealt with. :)

[SQ GT-S]

But then why find these new wires around the car? Aren't most of the wires I would need for an alarm install already in the factory harness?? They should be. At least the lights, door locks, dome light, horn, and a few others. Does anyone have the alarm wiring information?

Curt

[IRL]

If you are just putting in a basic alarm system...then most if not all your wires will be in that harness. Pretty easy to test for them if you have a harness in your hand...so more wiring info wont help much. :)

[SQ GT-S]

Well, I'm lazy and don't want to test all the wires. I would prefer just looking at a sheet with colors and just tapping all the wires. Well, not really tap them. I'm going to buy/make a harness to go on the factory harness so that I don't have to cut any wires. This way, when I sell the car, I can just unplug my alarm and plug the original one back in.

So if anyone has those wire specs, please share. :)

Curt

[IRL]

Man, even with a wiring diagram infront of me...I always test the wires. I guess in my line of work you have to be 100% sure that you are soldering on to the right line...I will never take a diagram to heart...since they are never 100% accurate. :)

A $5 test light resting on ground will help you find those wires in less than a minute...stop being lazy!!! :gap:

[SQ GT-S]

LOL, I use a DMM. A friend of mine uses this awesome test light. It's got 3 LEDs in it. Depending on what the signal is (pos, pulsed, neg, etc) the LEDs light up differently. I want one. I would ask him, but he down in Pheonix right now doing another install for some football player. About 40 g's worth of install equipment. LOL

IRL, do you use a standard test light (bulb and wire) or do you have something fancy?

And I agree, wiring diagrams aren't always right. I usually go according to the diagrams, but I try to get the info from multiple sources first. One example is my mom's Camry. I downloaded 4 wiring manuals, and for somethings, there were 4 different wires. I ended up testing most of the wires.

Curt

[IRL]

I have a DMM, but I also have a computer safe logic probe, along with the standard 5amp test light.

The Multimeter and Logic Probe are excellent tools...but for the most part I am very familiar with pretty much any car out there...so I choose my trusted snap on test light. :) I like being able to trigger the locks/factory alarm arm/disarm on vehicles.

For anyone new to installing, the standard test light is a complete no no. You can cause so much damage it isnt even funny!

For me, working 10hours a day 6 days a week for the past 3 years installing security makes you really remember wiring colors in pretty much any car without having to look up wiring codes. :wiggle:

[kardician]

hi, can someone email a wireing guide to speedymale@speedymail.org thanks.

[yovan]

can anyone please send me the guide

[CelicaSportzGT]

www.12voltresource.com

$10 full wiring guides with colors, alarm install instructions including remote start, audio system install instructions, etc. all on a cd-rom

[Live42day]

www.the12volt.com

This should help most of you.

[yovan]

hmm that's gonna be difficult to get I live in Mauritius I don't think they would ship , I'll try and let you guys know

[klutch]

e mail to klutch_gts@yahoo.com please

and yes i drive a gt

[alex93393]

me me me me alex93393@excite.com

[SQ GT-S]

Hello old post...

Curt

[SickCelica696]

i just got my wiring diagram book from toyota today, cost 61.00$ its a pretty good book. i just scanned through it but it looks like what i need. hopefully now i can figure out why the buttons on my stereo dont light up but the display works fine.

Dude ive had that problem for months...the display works but no buttons, but if i start up the car and dont do anything it works, touch a button and they go out..gimme a solution if you figure it out