Installing rear valence

[dark_illusionz]

Hey guyz, i'm thinking about getting the rear valence from some1 but I dont wanna drill the holes into the center of the rear bumper. Do you guyz think itz okay just to use double sided tape and drill the 2 holes in the wheel well?

[oONoGoAutoOo]

Hey guyz, i'm thinking about getting the rear valence from some1 but I dont wanna drill the holes into the center of the rear bumper. Do you guyz think itz okay just to use double sided tape and drill the 2 holes in the wheel well?


yeah get some 3m automotive tape, and just put screw to the sides and that should hold fine. =)

[X-EVIL-X]

yea what valance are you getting
just need the two on the wheel wells

[dark_illusionz]

getting the older one, mechanical version...

[krazeazn]

thats what i did w/ my rear works fine

[robare99]

I debated this for a moment, then realized I am going to have the kit on my car for a LONG time so if I'm going to do it, I'm going to do it right. I drilled the 4 holes in my bumper. I'd rather have it look great, than have the tape come loose and have it fall off or drag down on the ground eventually.

It's just a bumper. Hell you could even pick up a used one later for probably $80.00 or so.

[1zz-fe ce|ica]

I'd would just drill the bumper. But I never planned on taking off my rear valence. Have had my car with the kit ever since 2001. I don't even think back about it.

[celicanewb]

is it easy to match up the holes?

[robare99]

If you take off the bumper, you can see on the inside of the bumper (underside) it is marked for all 4 holes with a little + sign