serious rear brake issues...need help

[Splish]

the installation guide for the brakes said to loosen the bleeder valve...in doing so, mr. rust helped snap the ******* right off...i pressed the brake pedal to see if anything squirted out but nothing happened..and my resevoir is still full..i dont get it...am i looking at a new drivers side rear brake or what

[Zer0]

You might try pulling the old bleeder valve out with a screw extractor.

[stein]

You might try pulling the old bleeder valve out with a screw extractor.


If the lower piece is still inside the caliper and no fluid is coming out you should be fine until you need to bleed the brakes, see above.