Need pics of oil lines on turbo

[VladsGTS]

im putting together the turbo and al the adapters for the oil feed. and i have a 90

[Smaay]

speak english man...i have no idea what you are asking for

[Oo DaRk StAr oO]

This is on a MR2-St of couse but you get the idea...

http://www.socalimports.org/gallery/files/1/IMG_0431.JPG

Autometer #2269

[Jesse IL]

You talking about the connection at the block or the connection at the turbo?

[VladsGTS]

im talkin about the connection at the turbo. so in other words i have the 90

[mukalicious]

i think it would have to go towards the firewall, since its the connection on the top wouldnt it come close to the manifold if it were facing the other way?

[VladsGTS]

heres a pic of how i have it know. and while im at it, how should i position the cold side of the turbo (u know how u can adjust it and turn it 360

[Jesse IL]

You shouldn't have any 90 degree fittings on the turbo :wtf:

You should have the inlet facing straight up with an AN adapter screwed into the turbo. Then attach your oil line to that.

[VladsGTS]

AN adapter?? pics ?

[Oo DaRk StAr oO]

http://www.socalimports.org/gallery/files/1/IMG_0415.JPG

[VladsGTS]

so you dont have the 90

[Oo DaRk StAr oO]

nope

[Jesse IL]

AN adapter?? pics ?

http://www.summitracing.com/

http://static.summitracing.com/global/images/prod/large/ear-981608.jpg

You need to know the thread size on the turbo and the size of the AN fitting on your oil line.

[Black_TRD]

nope

why? I have the 90 and works just fine :eatpop:

btw you can not decide where to point it now you will have to see when you have the manifold

[VladsGTS]

k thnx. another question where did you install ur oil pressure gauge? in the same spot oil feed?

[Black_TRD]

k thnx. another question where did you install ur oil pressure gauge? in the same spot oil feed?

yes it will read a bit lower but works