ichibausa
07-21-2006, 11:28 AM
Have gap between the fender and rim?
Offset problem or need to clear the caliper?
Wheel spacers would help you solve the problems.
We would like to let you guys know how to measure the size you need.The widest point of your tire and wheel combination is usually the outside diameter of the tire sidewall. Using a ruler with the straight edge flush with the face of the tire, measure the gap between the outer face of the tire to the inside lip of the fender as shown in the diagram. This will determine the thickness of the spacer you will need.
http://site.ichibausa.com/Photos/measure_small_s.JPG
We hope this info would help
5MM = 0.197 INCH
8MM = 0.313 INCH
10MM = 0.393 INCH
12MM = 0.473 INCH
15MM = 0.590 INCH
20MM = 0.787 INCH
25MM = 0.983 INCH
Any other questions, please post up!
Offset problem or need to clear the caliper?
Wheel spacers would help you solve the problems.
We would like to let you guys know how to measure the size you need.The widest point of your tire and wheel combination is usually the outside diameter of the tire sidewall. Using a ruler with the straight edge flush with the face of the tire, measure the gap between the outer face of the tire to the inside lip of the fender as shown in the diagram. This will determine the thickness of the spacer you will need.
http://site.ichibausa.com/Photos/measure_small_s.JPG
We hope this info would help
5MM = 0.197 INCH
8MM = 0.313 INCH
10MM = 0.393 INCH
12MM = 0.473 INCH
15MM = 0.590 INCH
20MM = 0.787 INCH
25MM = 0.983 INCH
Any other questions, please post up!