PDA

View Full Version : Greddy s/c question

B2000GT-S
08-09-2006, 04:36 AM
What other parts do you need that dont come in the kit to run a greddy s/c?
nyoneway
08-09-2006, 07:11 AM
The kit has everything you need to get you up and running. Do a search things that are recommended.
matadorgts
08-09-2006, 12:24 PM
Start buy getting colder spark plugs, wideband, boost gauge, you got a 00 GT-S so it shouldl be pretty straight forward unlike the 03+.
B2000GT-S
08-09-2006, 02:47 PM
j/w cause reading the *** about turbos it had a little checklist to go through... didnt find one for supercharger, but thanks for the info
sbocaj55
08-14-2006, 01:24 PM
do a search there are plenty of threads on it.

Things you NEED:

-the kit
-solder
-silicone sealant
-jug of coolant

might need and I recommend:
-new thermostat
-new injector seals
-anything else that's gettin old
-colder spark plugs (ik24 or ik22)
-spec stage 2 or rps street max disc or southbend clutch...

might want:
gauges...boost, oil, wideband o2
e_degala
08-25-2006, 10:10 PM
aem uego (wideband). i think it's a must. has the sensor, wiring, and digital display of the exact air-fuel ratio. much more precise than just a gauge that reads lean-stoiche-rich and a must for tuning.

aftermarket clutch. definitely, you need to be able to handle and grab all that torque without any slippage going on. make sure the clutch is rated to handle the anticipated torque output and not be overkill that'll kill daily driving.