Questions about Greddy Profec B II

[ekindbest]

I read all the other post...but the more I read the more confusing I gets....can some1 help me with setting it up!? I got Turbonetic T3/T4 turbo, the current setting its on the unit is: (7.5 PSI of boost w/ Greddy eManage blue version)

Set - 55% (53% is at 6.5-6.8 psi)
Gain - 25%
Set Gain - 20
Warning - 85
L. Warning - 10%

My turbo is somehow laggy, but back when I first got it, it spools up very fast and full boost like in seconds. But now it starts to spool near 3k RPM and full boost at 4.5K-5K RPM under full throttle. Would appreciate experts in this boost controller please help or give comments, very desperate of helps.

[Jesse IL]

http://www.newcelica.org/forums/showthread.php?t=225188

[ekindbest]

Jesse I read that post last night but like I said the more I read the more confusing I gets.......

I assume I have to raise the "SET GAIN" to like atleast 60-70 to have better response, correct me If I'm wrong and btw is GAIN set at the right amount?

[Jesse IL]

Your gain setting is way too high and your set gain is way too low most likely. Follow the method I outlined in that post. It seems pretty straightforward to me, so you're going to have to be more specific about what is confusing you.

[Vamp]

Recheck that thread. I just posted up some info on there.

[ekindbest]

I see so SET GAIN should be set at 4 PSI lower than how many PSI I'm running.
For E.X. I'm running 7.5 PSI I should have SET GAIN at 3.5 PSI

[Vamp]

Have SET GAIN down so that it doesn't interfere with SET and GAIN. Once you have SET and GAIN worked out, then adjust SET GAIN up until you see your boost spike, then adjust it down one.

[ekindbest]

well everything is set just wait till tomorrow for the test drive.