Pinoyspd17
05-16-2002, 04:30 PM
Before Kit Remodification:
http://photos.yahoo.com/bc/pinoyspd17/lst?.dir=/My+Photos/Before+Re-mod&.src=ph&.order=&.view=t&.done=http%3a//photos.yahoo.com/bc/pinoyspd17/lst%3f%26.dir=/My%2bPhotos/After%2bRe-mod%26.src=ph%26.view=t
After Kit Remodification: (not much different from before)
http://photos.yahoo.com/bc/pinoyspd17/lst?.dir=/My+Photos/After+Re-mod&.src=ph&.order=&.view=t&.done=http%3a//photos.yahoo.com/bc/pinoyspd17/lst%3f%26.dir=/My%2bPhotos/After%2bRe-mod%26.src=ph%26.view=t
Kit Fitment:
http://photos.yahoo.com/bc/pinoyspd17/lst?.dir=/My+Photos/Kit+Fitment&.src=ph&.order=&.view=t&.done=http%3a//photos.yahoo.com/bc/pinoyspd17/lst%3f%26.dir=/My%2bPhotos/Kit%2bFitment%26.src=ph%26.view=t
Blue Stuff:
http://photos.yahoo.com/bc/pinoyspd17/lst?.dir=/My+Photos/Blue+Stuff&.src=ph&.order=&.view=t&.done=http%3a//photos.yahoo.com/bc/pinoyspd17/lst%3f%26.dir=/My%2bPhotos/Kit%2bFitment%26.src=ph%26.view=t
heres the story on the re-mod, check at the bottom:
well...before the modification:
1) the gap above the insignia was uneven...you could see where part of the bumper came upwards to a point...kinda like a "/\" but flatter...
2) the fit on the sides (to the side of the headlights) was Off..the bumper flared out a little too much so it kinda formed a "ledge" at that gap....
3) i think this is with all aftermarket bumpers but....underneath, it came out farther than where the engine plastics underneath could attach....so it kinda caught air, forced downward, and scraped against the ground at 20+ mph....they just built a bridge that connected the plastics to the front bumper...
i have no idea how they fixed the first two problems..but now, the "/\" isnt that bad...and the fit around the headlights is almost perfect...and no more plastic scraping...
the bumper sits lower than stock..but pretty high for aftermarket....in fact, the lowest part of my car are at the front end of the R2 sideskirts....so i have no problems gettin onto my driveway....
total price: $700 for paint and custom install....awesome deal..
anyone here in FL, i recommend C&G's Custom here in Jax...
http://photos.yahoo.com/bc/pinoyspd17/lst?.dir=/My+Photos/Before+Re-mod&.src=ph&.order=&.view=t&.done=http%3a//photos.yahoo.com/bc/pinoyspd17/lst%3f%26.dir=/My%2bPhotos/After%2bRe-mod%26.src=ph%26.view=t
After Kit Remodification: (not much different from before)
http://photos.yahoo.com/bc/pinoyspd17/lst?.dir=/My+Photos/After+Re-mod&.src=ph&.order=&.view=t&.done=http%3a//photos.yahoo.com/bc/pinoyspd17/lst%3f%26.dir=/My%2bPhotos/After%2bRe-mod%26.src=ph%26.view=t
Kit Fitment:
http://photos.yahoo.com/bc/pinoyspd17/lst?.dir=/My+Photos/Kit+Fitment&.src=ph&.order=&.view=t&.done=http%3a//photos.yahoo.com/bc/pinoyspd17/lst%3f%26.dir=/My%2bPhotos/Kit%2bFitment%26.src=ph%26.view=t
Blue Stuff:
http://photos.yahoo.com/bc/pinoyspd17/lst?.dir=/My+Photos/Blue+Stuff&.src=ph&.order=&.view=t&.done=http%3a//photos.yahoo.com/bc/pinoyspd17/lst%3f%26.dir=/My%2bPhotos/Kit%2bFitment%26.src=ph%26.view=t
heres the story on the re-mod, check at the bottom:
well...before the modification:
1) the gap above the insignia was uneven...you could see where part of the bumper came upwards to a point...kinda like a "/\" but flatter...
2) the fit on the sides (to the side of the headlights) was Off..the bumper flared out a little too much so it kinda formed a "ledge" at that gap....
3) i think this is with all aftermarket bumpers but....underneath, it came out farther than where the engine plastics underneath could attach....so it kinda caught air, forced downward, and scraped against the ground at 20+ mph....they just built a bridge that connected the plastics to the front bumper...
i have no idea how they fixed the first two problems..but now, the "/\" isnt that bad...and the fit around the headlights is almost perfect...and no more plastic scraping...
the bumper sits lower than stock..but pretty high for aftermarket....in fact, the lowest part of my car are at the front end of the R2 sideskirts....so i have no problems gettin onto my driveway....
total price: $700 for paint and custom install....awesome deal..
anyone here in FL, i recommend C&G's Custom here in Jax...