PDA

View Full Version : work wheels


Redpunk
01-02-2007, 05:05 PM
i just order my work 17x8 today so and i will buy some nitto neogen for those rims... i was going to order 205/40/17 so you guys think is that fine??? i dont know nothing about tires???? so please help me put with this... because i will order the rubbers tomorrow... thanks alot guys...

pnoy
01-02-2007, 06:17 PM
235x40x17 is the recommended size.

badceli
01-02-2007, 06:49 PM
i will order rubbers tomorrow.
I have no idea which size rubbers you need (I use extra large myself), but I agree with pnoy on the tire size.

Redpunk
01-02-2007, 06:53 PM
If I Use 205/40/17 What Is It Going To Be??? Thats What I Am Asking... Is It Going To Look Ugly Or What???

Redpunk
01-02-2007, 06:58 PM
is it going to slow down the car??? i really dont have any idea about tires so please let me know guys... i will be appericiated...

HellicaGT-S
01-02-2007, 07:14 PM
its just pretty much the size u want the tire to be u can get 205 215 235 which ever one works for u i suggest either 215 or 235

Redpunk
01-02-2007, 07:18 PM
the shop told me 205 or 225 but i am really confused... ı dont want to get 235 eıther... ı dont know if it make the car slow down or not??? you dıdnt say 225 ı dıdnt understand why???

pnoy
01-02-2007, 07:20 PM
get a 240x45x17

that's what I'm planning on getting

HellicaGT-S
01-02-2007, 07:23 PM
i would just go with 225 or 235 its a good size for 17x8 because u dont want the lip of the rim sticking out more than the tire is because then u gonna mess up the lip

Redpunk
01-02-2007, 07:24 PM
thanks for advice but 45 is too high profile because i used to use 35 low profile so ı wont go more than 40...

pnoy
01-02-2007, 07:24 PM
^ 240 then. 235 isn't that flushed with the wheel.

Izzy2k
01-02-2007, 10:08 PM
225-45-17. u wont go wrong. do a search.

pnoy
01-02-2007, 10:11 PM
I have Work CR wheels with 235x40x17.. trust me.. it's alright... If I was to get it again I would have gone with 240x40x17 or 240x45x17.

Mike21
01-02-2007, 10:52 PM
240??? i think you mean 245...

Pulsar1
01-02-2007, 11:09 PM
240??? i think you mean 245...
:werd: And even then you would want a 245/40 at most. I honestly would go with a 235/40/17 its alittle higher than stock 24.4 vs 24.0 so it will fill the fenders and ride alittle better than a 235/35/17. I wouldn't go under a 235 on a 8" width rim if for no more than aesthetics, I hate super stretched looking tires. They look like you couldn't afford the proper sized tire so you had to buy the next size down.

Mike21
01-04-2007, 12:00 PM
i'll be getting 225/40-17 on my 17x8 inch wheels in the future. haven't decided which tires to go with, though.

Redpunk
01-04-2007, 09:09 PM
thanx guys for advice i apperciated one and another... i purchased the nitto NT555 225/40/17 so i hope it will be a great stuff... at least when i open this thread i was going to buy 205/40/17 after that i changed my mind little bit so thanx all of you...