View Full Version : taking the spoiler off
hyperforce3
01-21-2007, 08:44 AM
I was jw how i would go about taking the stock spoiler off my 00 gts...
lpphreakx06
01-21-2007, 08:50 AM
http://www.newcelica.org/forums/showthread.php?t=222558
Whitey
01-21-2007, 09:06 AM
don't drop the nuts in the hatch, they're a bitch to get out. I did that and have the most annoying rattle from it.
hombredelassrta
01-22-2007, 02:15 PM
i dropped one but it fell forward so behind the license plate.mydad just shook the hatch up and down and the little bitch flew out the hole.complete luck ;)
celiwha?
01-22-2007, 05:14 PM
hi all. long time reader, first time poster.
i dropped the nuts in there before. just open the hatch up all the way and follow back to where the top of the window is. there should be this little plastic piece that plugs up a hole.
just take that out and scoop your nuts out. :gap:
i dunno if i'm making it clear...but just look for a black cap thing.
celiwha?
01-22-2007, 05:17 PM
by the way, anyone know how to take off a stock TRD wing? i took off the 4 nuts and it seemed like it was cemented on...
i pulled pretter firmly but it didnt budge. is there an extra screw somewhere on the action package wings?
Actually, the TRD wing is held on by double-sided sticky tape.
supracelica32
01-22-2007, 08:23 PM
Actually, the TRD wing is held on by double-sided sticky tape.
that **** is a bitch to get seperated...had to take a razorblade and cut at it lil by lil till we could start lifting the stand off of the hatch. got to be very careful in cutting it!
jlitman
01-23-2007, 01:31 AM
^^^ A length of fishing line or even strong dental floss should cut through it ;)
Nickbcelica
01-24-2007, 05:48 AM
Do you guys know roughly how much the cost is to fill the holes and sand down the nipples say if i was to take it to a body shop?
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.