CF spark plug cover and Xenondepot H7 HID wiring harness (both brand new)

[evil eye]

Up for sale is a 2x2 CF spark plug cover. It's a copy of the RMM design and was made by Julia. This was probally the best piece she ever made. No flaws in the weave and the clear is pretty good, but a wetsand couldn't hurt. Very lightweight and thin. This part was never used.

SOLD to RJAY

http://www.newcelica.org/photopost/data/500/CF_Spark_Plug_Cover.jpg



I also have a Xenondepot H7 HID wiring harness. This harness will allow you to use a true OEM D2S HID kit without drawing a higher current from the OEM harness. It includes an upgraded fuse and relay. They're brand new and I'm asking for for $45 shipped.

SOLD to nEwgUy00

http://www.newcelica.org/photopost/data/500/Xenondepot_D2S.jpg

[hombredelassrta]

possibly interested in valve cover :)

[RJAY]

Pmed you

[evil eye]

Dam you guys are fast! PM's returned.

[RJAY]

Pmed you back. Let me know asap.

[RJAY]

I'll take it so pm me back.

[Speed4TheNeed]

I will outbid ;)

I want the CF spark plug cover..whats the current offer?

Eh, knowing Joe...he's too good of a guy to back out of a deal if he's already made one. Props to anyone who got ahold of this before I could look at this thread. But...if there isn't a firm deal yet, definately let me know. ;)

[lpphreakx06]

I will outbid ;)

Eh, knowing Joe...he's too good of a guy to back out of a deal if he's already made one...


Hm? :chuckles:
Good luck Joe

[evil eye]

I'll take it so pm me back.


PM returned.

I will outbid ;)

I want the CF spark plug cover..whats the current offer?

Eh, knowing Joe...he's too good of a guy to back out of a deal if he's already made one. Props to anyone who got ahold of this before I could look at this thread. But...if there isn't a firm deal yet, definately let me know. ;)


Hey Caleb. Sorry man, I have to sell it to RJAY since he PM'ed me like a minute after I posted the thread. If he doesn't come through with payment I will let you know asap.

Damn. If I would have known this piece would have been so popular I would have started an auction. :gap:

[Sultan]

Joe - I'll take the XenonDepot harness kit... pm me with payment info and I'll send it right away

_

[evil eye]

^ PM sent.

[RJAY]

Payment sent for CF Spark Plug Cover

[evil eye]

^ He speaks the truth. PM returned.

Xenon Depot harness kit pending to Sultan.

[Speed4TheNeed]

I'll take it so pm me back.


PM returned.

I will outbid ;)

I want the CF spark plug cover..whats the current offer?

Eh, knowing Joe...he's too good of a guy to back out of a deal if he's already made one. Props to anyone who got ahold of this before I could look at this thread. But...if there isn't a firm deal yet, definately let me know. ;)


Hey Caleb. Sorry man, I have to sell it to RJAY since he PM'ed me like a minute after I posted the thread. If he doesn't come through with payment I will let you know asap.

Damn. If I would have known this piece would have been so popular I would have started an auction. :gap:


I can understand that completely.


Payment sent for CF Spark Plug Cover


Haha nice buy. Now get tired of it really fast and then I'll pay you more than what you bought it for ;) J/K, but if you do decide to sell anytime in the near future let me know :thumbup:

[evil eye]

Sultan, are you getting my PM's?

The Xenon Depot harness kit is still for sale

[SLVR Stealth]

Dang, Joe too bad we don't have a GT-S I would've hopped on the cf piece a.s.a.p. lol. Someone's going to be lucky. Howcome you don't want it just curious?

[Sultan]

Sultan, are you getting my PM's?

The Xenon Depot harness kit is still for sale

been busy Joe - I just viewed them... pm replied

_

[evil eye]

Dang, Joe too bad we don't have a GT-S I would've hopped on the cf piece a.s.a.p. lol. Someone's going to be lucky. Howcome you don't want it just curious?


I've had the RMM cover and this CF cover in my possession for a while now and as you can see, the RMM won. :D I'm going with the RMM cover to accent the future mods I have planned, which is a polished intake manifold and polished CAI.

Sultan, are you getting my PM's?

The Xenon Depot harness kit is still for sale

been busy Joe - I just viewed them... pm replied

_


Oh, ok cool. PM returned. :)

[RJAY]

Haha nice buy. Now get tired of it really fast and then I'll pay you more than what you bought it for ;) J/K, but if you do decide to sell anytime in the near future let me know :thumbup:

Thanks, I'll let you know when I get tired of it. Haha

[drpdmazda]

yeah that spark plug cover is top notch, i saw it a few months back when i was out at joes house, it is one of the nicest ones i have seen

good luck with the sale joe,

buyer will be very happy with this item

[evil eye]

Thanks Jason. I'm sure RJAY is enjoying it as we speak. :D

BUMP for the wiring harness.

[RaptorGTS]

crap i should have seen this earlier :(
Where else might I be able to get a carbon spark plug cover?

[evil eye]

No one else made them except Julia. But you can buy a RMM cover and have Top Shop wrap it for you. ;)

[lpphreakx06]

I'm about to buy the mold, so ill be making them

[evil eye]

You have Julia's mold? And you have Matt's mold for the navi-filler too. How many molds you got man? :chuckles:

[Widebody SC GTS]

last I heard she either sold her mold and they're selling them on eBay, or she's still selling them on eBay.

[evil eye]

BUMP for the harness

[lpphreakx06]

I might buy taht harness..Ill let you know later today.

[evil eye]

K, call me if I'm not online.

[evil eye]

Tuan, I got your IM. You still want 'em?

[evil eye]

Up

[lpphreakx06]

You didnt reply to my IM..thought you didnt want to talk tome anymore. So no i don't want them anymore.

Just kidding let me put some money in my paypal checking account and I'll send payment

[evil eye]

:chuckles:

Ok sounds good.

[evil eye]

The harnesses are still for sale.

[Leems]

Will these plug into any generation xenondepot ballasts? even the newer slim style?

[evil eye]

These will work with the old ones, but I can't attest for the newer slim ones. it all depends on if they changed the pinset for the female input on the ballast.

[evil eye]

Bump

[evil eye]

Ttt

[Brizzle]

free bump. really good salesmen to honor first come first serve rather then taking the bigger big for the first item.

[evil eye]

Man, it's really hard to turn down more money when you don't have a lot of it. But I couldn't go against my morals. I appreciate the fact that people still respect beliefs like that, so thank you for the kind words. :)

[lpphreakx06]

chump :p:

[evil eye]

:fawk:

BUMP

[KEnny Heiser 3]

Dang, Joe too bad we don't have a GT-S I would've hopped on the cf piece a.s.a.p. lol. Someone's going to be lucky. Howcome you don't want it just curious?

crap i should have seen this earlier :(
Where else might I be able to get a carbon spark plug cover?

I'm about to buy the mold, so ill be making them





I should have a few of these made up next week , hombredelassrta Donated me his RMM cover for the mold . I saw this post awhile ago , but I never saw the post about these selling on Ebay , or lpphreakx06 planning on making them ??? I cheacked ebay , I can't find any ?

Anywase , I am planning on becoming a sponser in like a week or so . I'm making part's right now to have in stock . I'll have a few different Cf part's available (upper dash insert , Oem clock insert, JDM doorsill insert) and one of them will be a extremelly high quality version of the RMM spark plug cover .


BTW Evil Eye , what about a 1x1 RMM Cover would you pimp that ???

[lpphreakx06]

Kenneh I wonldnt have any time because of midterms to make these spark covers. You should go for it...You know I would be down for whatever you decide to make.

[lpphreakx06]

haha replied your pm

[evil eye]

Anywase , I am planning on becoming a sponser in like a week or so . I'm making part's right now to have in stock . I'll have a few different Cf part's available (upper dash insert , Oem clock insert, JDM doorsill insert) and one of them will be a extremelly high quality version of the RMM spark plug cover .


BTW Evil Eye , what about a 1x1 RMM Cover would you pimp that ???


I'm fine with the RMM spark cover I have now. I already have the full IPT CF dress up kit. I want to add a few more polished pieces, so I'm going to keep the RMM for now. Thanks though.

However, I am interested in the other 3 products you're thinking about making... the clock insert, the JDM doorsills insert, and the upper dash insert. All in 1x1 of course. :gap: Thanks Kenny.

[Speed4TheNeed]

That dumb spark plug cover just cost me $140 on Ebay....thanks for not selling to me the first time, Joe :chuckles:

j/k j/k! I just gotta learn to jump on things faster than the other vultures on this site :coughRJcough: :chuckles:

[hombredelassrta]

i was checking those ipt part prices and damn thats allot of money. i have secured a set of large fuse/small fuse/ and ecu cover but the valve, large plastic and small plastic are still out of my reach. cant wait to get the rmm and clock in though . kenny is the man :thumbup:

[Speed4TheNeed]

^^ Yeah, it's best just waiting to find a deal on here for them. They uphold pretty well so even the used one's still look pretty much brand new. That's how both Joe and I got ahold of our pieces, you can chop a couple hundred off at least.

[hombredelassrta]

i just dont like how they are dull. i know kenny's rmm piece will be very glossy and i think i will get the other pieces cleared and polished to match. u know me i'm attracted to shinny objects ;)

[Speed4TheNeed]

Mine aren't dull? Obviously dust from the engine bay will dull things up but when clean they are pretty shiny. Now as shiny as the stuff Kenny uses? probably not...the guy uses like PPE or something and it shines like crazy, it's the same stuff we used on my gf's car we painted and it's a pretty penny. I forget the exact price of it but it's like $200+ or so for a gallon. You can always clearcoat the IPT pieces with it as well to match. But I def don't think the IPT pieces are dull...check out Sultan's engine bay, he has some clean pics posted up which I'm sure you've seen already.

[evil eye]

That dumb spark plug cover just cost me $140 on Ebay....thanks for not selling to me the first time, Joe :chuckles:

j/k j/k! I just gotta learn to jump on things faster than the other vultures on this site :coughRJcough: :chuckles:


Dayam! Now I wish I sold mine to you. :chuckles:

i was checking those ipt part prices and damn thats allot of money. i have secured a set of large fuse/small fuse/ and ecu cover but the valve, large plastic and small plastic are still out of my reach. cant wait to get the rmm and clock in though . kenny is the man :thumbup:


Yeah IPT is no joke. I managed to find every piece used though. Took a while, but it was worth it. Like Caleb said, I saved a couple of hundred at least and they all look new.

[hombredelassrta]

i have only seen one set in person and it wasnt overly dull but still not as clearcoated glossy as say topshops or kenny's pieces. the one i saw though maybe was just old and needed a cleaning bad. but also another member, mentioned how their ipt pieces could use a clearcoating as well

[evil eye]

Bump for the harness.

[evil eye]

Up

[evil eye]

Still have the harness.

[evil eye]

Harness sold! Thanks everyone for looking.