GB: Bodykits! (TRD, Kam, BC2, Varis, Veilside, etc.)

[Jintei]

GB HAS ENDED, SEND OVER PAYMENTS, PLEASE!
If you're still looking to purchase a kit outside this GB, contact me at nimrodscript@hotmail.com
I'll beat any prices for any kits out there! I have kits for other cars as well, just email me! Thanks for your interest!

ENDS ON JUNE 1st 2007.

**Blowout sale on all bodykits (replica)!** :eek:

Aplication: 00-05 Celica.
Material: Grade A FRP. White gel coat finish.
Fitment: 95%-100%.
Price: Too low to advertise, PM me!
Payment: Paypal or Money Order.

TRD (Full Kit, Free Mesh Grille) 2 Available!
http://i46.photobucket.com/albums/f109/Nimrodcelica/TRD/1.jpghttp://i46.photobucket.com/albums/f109/Nimrodcelica/TRD/2.jpghttp://i46.photobucket.com/albums/f109/Nimrodcelica/TRD/3.jpg

Kaminari (Full Kit, Free Mesh Grille) 2 available
http://i46.photobucket.com/albums/f109/Nimrodcelica/Kaminari/1.jpghttp://i46.photobucket.com/albums/f109/Nimrodcelica/Kaminari/2.jpghttp://i46.photobucket.com/albums/f109/Nimrodcelica/Kaminari/3.jpg

Buddy Club 2 (Full Kit, Free Mesh Grille) 3 Available!
http://i46.photobucket.com/albums/f109/Nimrodcelica/Buddy%20Club%202/1.jpghttp://i46.photobucket.com/albums/f109/Nimrodcelica/Buddy%20Club%202/3.jpghttp://i46.photobucket.com/albums/f109/Nimrodcelica/Buddy%20Club%202/2.jpg

Varis (Front & Sides, Free Mesh Grille) 1 Available!
http://i46.photobucket.com/albums/f109/Nimrodcelica/Varis%20Extremor/1.jpg

Veilside (Full Kit, Free Mesh Grille) 2 Availble!
http://i46.photobucket.com/albums/f109/Nimrodcelica/Veilside/1.jpg

BRS Front 3 Available
http://i46.photobucket.com/albums/f109/Nimrodcelica/Bodykits/1.jpg

Mix and match option is available!
Other kits available: Buddy Club 1 (full kit), Blitz (front & rear), R34 (front).

I will keep this thread updated, so watch for the quantity of each kits!

PM me for questions! :thumbup:

Thanks,
David Yansens
-=Jintei Kits=-

Paypal: nimrodscript@hotmail.com

List:
1. KamikazeNoName (Cory): Veilside Full Kit, FULL PAYMENT, SHIPPED.
2. Cookie (Jon): Varis Sides, FULL PAYMENT, PICKED UP.
3. As a Weapon (Lance): Kaminari Full Kit, FULL PAYMENT, SHIPPED.
4. CocoBunnyXxX (Ana): Kaminari Front, FULL PAYMENT, SHIPPED.
5. StreetGTS11 (Derek): TRD Spoiler, FULL PAYMENT, SHIPPED.
6. Orangecelica5 (Donald): Kaminari full kit, FULL PAYMENT, SHIPPED.
7. M28Matrix (Matt): TRD Full Kit, FULL PAYMENT, SHIPPED.
8. skreemin_trdgts (Bill): BC2 Front, FULL PAYMENT, SHIPPED.
9. phillycheese917 (Phillip): Kaminari Front & Rear, FULL PAYMENT, SHIPPED.
10. celica sp33d (Adrian): '01 Civic bodykit, FULL PAYMENT, SHIPPED.
11. Carcept GT-S (Mark): BRS front bumper, FULL PAYMENT, SHIPPED.
12. arla1n (Arlan): Varis Front, Veilside Sides and Rear, FULL PAYMENT, SHIPPED.
13. mkpconway (Paris): Kaminari Full Kit, FULL PAYMENT, SHIPPED.
14. NeXus-GT (Olivier): Audi TT Teknik Full Kit, FULL PAYMENT, SHIPPED.
15. ChrisOaty (Chris): BC2 front & sides, Kaminari rear, FULL PAYMENT, PICKED UP.
16. Modifyed_driver (Joe): TRD sides & rear, FULL PAYMENT, PICKED UP.
19. cargirlie82: Kaminari sides & rear, FULL PAYMENT, SHIPPED.
20. Baka (Simon): Veilside Full Kit, FULL PAYMENT, SHIPPED.
21. loneredliner (Sonny): TRD Full kit, FULL PAYMENT, PICKED UP.

Awaiting payments:
1. Celica_2nr (Christopher): BC2 front and rear, Deposit.
2. beth~celicagts (Beth): TRD Full Kit, deposit.

[lpphreakx06]

holy crap!!

[Jintei]

holy crap!!

Interested, Tuan? PM me for pricing! :thumbup:

[Jintei]

:thumbup:

[lpphreakx06]

Yeah, can you PM me the price for just the TRD rear...

[yello2k3]

this site just gets better and better, do you sell just separates like just a front bumper or just sideskirts

[Jintei]

Yeah, can you PM me the price for just the TRD rear...

Sending PM....

[Jintei]

this site just gets better and better, do you sell just separates like just a front bumper or just sideskirts

Yes, individual parts are available! :thumbup:

[20celica00]

how much for a trd front pick up?? i have the price shipped.

[Jintei]

how much for a trd front pick up?? i have the price shipped.

PMed. :thumbup:

[verbal272]

Oh em gee

[wtcnbrwndo4u]

Wow... At least I know you'll still be doing this when I get my Celi... :)

[Jintei]

Wow... At least I know you'll still be doing this when I get my Celi... :)

Buy a celi soon, bro. :)

[RekD0514]

I would like to know what the price is for a TRD rear shipped to 57038 is too!

[Jintei]

PMs replied! :gap:

[yello2k3]

i didnt get a reply

[Jintei]

PMs replied!!! :thumbup:

PM ME FOR SPECIAL PRICING!!!

[yello2k3]

sorry i meant how much for varis front not vizage

[20celica00]

he has a vizage front too??? how much for that pickup?

[Jintei]

he has a vizage front too??? how much for that pickup?

No. I don't have that. :)

[20celica00]

^^ alright... still thinking about that trd front... ill let you know

[Redpunk]

wow dude you are all over the bodykit business... ;)
bump for STL homie ;)

[Punkers7465]

kam front and veilside rear to 44278 please :)

[icebreakerz]

TRD front+sideskirt+rear shipped to 95121? and how much for them individually?

[arla1n]

PM the price of the veilside kit please?
quick question. issit poly urethane?

[Jintei]

^^ alright... still thinking about that trd front... ill let you know

Sure. just let me know! :)

-David

[Jintei]

wow dude you are all over the bodykit business... ;)
bump for STL homie ;)

Thanks, bro! :)

-David

[wtcnbrwndo4u]

PM the price of the veilside kit please?
quick question. issit poly urethane?
Refer to post 1. It's made of FRP. Strong as urethane, light as fiberglass.

[Jintei]

Refer to post 1. It's made of FRP. Strong as urethane, light as fiberglass.

Thanks, bro. And.... there has never been a polyurethane Veilside kit. :)

-David

[Jintei]

Updated list on the first post.

PM ME FOR PRICING!!! :eek:

[DooM]

whats crackin with some FRP C-one? :chuckles:

[Zero]

What?!

David, how good of a fitment is your Varis kit? If it fits good, I might just have to get it. PM me with the price and I'll see if I can scrounge up enough by selling my Vizage kit, too many people with it now.

BTW, its not the R2 kit, its the BRS kit.

[Jintei]

What?!

David, how good of a fitment is your Varis kit? If it fits good, I might just have to get it. PM me with the price and I'll see if I can scrounge up enough by selling my Vizage kit, too many people with it now.

BTW, its not the R2 kit, its the BRS kit.

PMed you, Chad. Thanks for the info! :)

[NDSbass]

pm me trd and kaminari prices, shipped to 60564 please

[Jintei]

pm me trd and kaminari prices, shipped to 60564 please

PM sent! :thumbup:

[ihartmycelica]

hey david
when are you getting those c/f front and side splitters :D

:thumbup:

[Cookie]

David, how much for the sides again? You know which ones I want...:D

[Jintei]

hey david
when are you getting those c/f front and side splitters :D

:thumbup:

Soon. ;)

[Jintei]

David, how much for the sides again? You know which ones I want...:D

PM, Jon! :)

[i_land_gts]

is the varis just the front and sides or is there a rear as well??and how much for the kit(varis) picked up??

[whiteonwhite]

can i get a quote on the kiminari kit full and shipped to 77086.

[Jintei]

Bump! PM for Pricing!

[KamikazeNoName]

Hopin to get this paid off as soon as possible so I can get mine

[Ht3kn1c]

Can I get quote on TRD sides and rear valence shipped to 61109. And individual prices for each shipped to the same zip code please

[midas81]

how much for full Kaminari kit shipped to 33716?

[SocalTRDgt]

qoute for the KAM kit and Varis kit pick up please...

[Jintei]

PM SENT and REPLIED! :)

-David

[Jintei]

Hopin to get this paid off as soon as possible so I can get mine

:thumbup:

[lpphreakx06]

Damn I wish shipping wasnt as high..sigh

[Cookie]

Damn it Tuan, what the hell are you doing still buying kits? :faint:

[Jintei]

Damn I wish shipping wasnt as high..sigh

My shipping price is the lowest for a FULL KIT packaging and it's 100% insured. :)

[Archer2KGTS]

How much for the Kam full kit shipped to 85750?

How much for the BC2 full kit shipped to 85750?

[L34K3R]

how much for Trd Rear, shipped and picked up?

[wtcnbrwndo4u]

Damn it Tuan, what the hell are you doing still buying kits? :faint:
:rofl:

Seriously, you must have like 3 different kits by now.

[CocoBunnyXxX]

^^^ lol. He's collecting. I'm so happy he has kam kits. How is the fitment for the kam kit and the veilside kit?

[Cookie]

^^^ lol. He's collecting. I'm so happy he has kam kits. How is the fitment for the kam kit and the veilside kit?


I've seen the kits in person, they're fitment is top-notch, so is their quality of finish. I'm buying my sideskirts from David for my new project. :D

[Jintei]

^^Thanks, Jon. :)
Varis sides are in stock and let me know when and where you want to meet up.

Thanks,
David

[celica_2nr]

would it be possible just to get the bc2 side skirt? if so how much shipped to 30518?

[Jintei]

would it be possible just to get the bc2 side skirt? if so how much shipped to 30518?

Yes. PM sent about the price. :)

[Jintei]

How much for the Kam full kit shipped to 85750?

How much for the BC2 full kit shipped to 85750?

how much for Trd Rear, shipped and picked up?

PMed. ;)

[Jintei]

Bump! ;)

[Jintei]

PM ME FOR PRICING! :thumbup:

[Zero]

What?!

David, how good of a fitment is your Varis kit? If it fits good, I might just have to get it. PM me with the price and I'll see if I can scrounge up enough by selling my Vizage kit, too many people with it now.

BTW, its not the R2 kit, its the BRS kit.

PMed you, Chad. Thanks for the info! :)

Almost there, David. Gotta pay some stuff off and I should have enough for the front. :headbang:

[blackTRDcelica]

you got pm... i want a BC2 front.... please pm back asap so i could send payment.. thanks!

[blackTRDcelica]

^^^ i meant with the pricing and all... and shipping quote to 47711 ... thanks again David!

[Cookie]

Hey David, I got a sh*t ton of tests and crap this week...only day I have time to pick up is Friday? Does that work for you?

[Zero]

Tustin, where is Tustin? I am pretty sure I've passed it on the way to the Hooters meet.

Jon, go and fit the Varis front bumper for me and see how it fits. I really want it, but I just want to make sure it fits well before selling off my Vizage front lip.

[Zero]

:gap:

[Jintei]

Almost there, David. Gotta pay some stuff off and I should have enough for the front. :headbang:

Sweet! Varis front is IN STOCK! Let me know whenever you're ready! :thumbup:

-David

[Jintei]

you got pm... i want a BC2 front.... please pm back asap so i could send payment.. thanks!

PMed! :gap:

[Jintei]

Hey David, I got a sh*t ton of tests and crap this week...only day I have time to pick up is Friday? Does that work for you?

FRIDAY THAT IS! :headbang:
I'll call you on Thursday!

[Jintei]

Tustin, where is Tustin? I am pretty sure I've passed it on the way to the Hooters meet.

Jon, go and fit the Varis front bumper for me and see how it fits. I really want it, but I just want to make sure it fits well before selling off my Vizage front lip.

Warehouse is located in Santa Ana. :)

[Cookie]

Jon, go and fit the Varis front bumper for me and see how it fits. I really want it, but I just want to make sure it fits well before selling off my Vizage front lip.

Will do Chad. :D

Warehouse is located in Santa Ana. :)


Santa Ana? :AF: So when you say halfway...do you mean halfway between Tustin and where I am or halfway between Santa Ana and where I am...

[Jintei]

Will do Chad. :D



Santa Ana? :AF: So when you say halfway...do you mean halfway between Tustin and where I am or halfway between Santa Ana and where I am...

We're meeting up not in Santa Ana. I'm just letting Chad know that the warehouse is at Santa Ana. I'll call you on Thursday. ;)

[Jintei]

Bump.

[Zero]

yikes! Santa Ana is a bit far. I'll go and mapquest it and see how far it is.

I can't wait for the new front.

[Jintei]

PMs replied!

[mikhalidis]

ygpm

[Jintei]

ygpm

PM replied! :)

[grommy]

Buddy Club 2 full kit shipped to 10990 how much???
Thanks

[Jintei]

Buddy Club 2 full kit shipped to 10990 how much???
Thanks

PMed!

[Jintei]

Pm Me For Pricing!

[Jintei]

PMs replied! ;)

[Jintei]

PMs replied! :thumbup:

PM me for great pricing, everyone! :)

[jaycee]

prices for trd side skirts, trd rear, kam front, kam rear. Trying to figure out a combo id like :)

[Jintei]

prices for trd side skirts, trd rear, kam front, kam rear. Trying to figure out a combo id like :)

Replied! :thumbup:

[Jintei]

PM me for pricing! You're not gonna believe it! :thumbup:

[Jintei]

PM me for pricing!

[Jintei]

PM me for pricing!

[Jintei]

Bump! ;)

[Jintei]

Bump. :drool:

[Jintei]

Bump.

[ViBrance]

need a price on the front TRD bumper. also, it's not fiberglass is it?

[Jintei]

need a price on the front TRD bumper. also, it's not fiberglass is it?

PMed. Yes, it's not fiberglass. It's FRP.

[Jintei]

Good morning! BUMP!

PM me for pricing! :thumbup:

[Pulsar1]

Pm prices for TRD sideskirts and rear please.

[Jintei]

Pm prices for TRD sideskirts and rear please.

PMed! :thumbup:

[Jintei]

PM replied everyone.

[JdmCelery]

hey jintei pm me prices for the trd replica? what about fitment will it fit on a 04 gt perfectly?

[Jintei]

hey jintei pm me prices for the trd replica? what about fitment will it fit on a 04 gt perfectly?

Sure! They fit perfect! :thumbup: YGPM!

[Cookie]

Just got my Varis sides from David tonight. They look great and fitment is good to go.

[Jintei]

Just got my Varis sides from David tonight. They look great and fitment is good to go.

Thanks, Jon. Sorry to keep you waiting, bro. :( I should've not missed the exit. Damn socal traffic. Anyways, good luck with your project. And let me know if anything comes up! I'll be glad to help you out! :thumbup: Varis FTW! :headbang:

[wel_565]

Just got my Varis sides from David tonight. They look great and fitment is good to go.
dude you suck I called you to see if you were going to see David I left you a message but no call back I wanted to go with..:faint: :(

[bamcelica]

You would happen to have TRD spoilers would ya?

[Cookie]

dude you suck I called you to see if you were going to see David I left you a message but no call back I wanted to go with..:faint: :(

Wha? :ugh: I don't have any message on my phone. The only calls I had were from David and they were listed as unknown as I didn't pick up. Other then that, no calls that I didn't answer.

[Jintei]

You would happen to have TRD spoilers would ya?

I HAVE! :thumbup:

[Jintei]

Wha? :ugh: I don't have any message on my phone. The only calls I had were from David and they were listed as unknown as I didn't pick up. Other then that, no calls that I didn't answer.

lol... :gap:

[bamcelica]

Very nice..i like..

How much? are they primed?
shipping to 10305?

[wtcnbrwndo4u]

Just got my Varis sides from David tonight. They look great and fitment is good to go.
:worthless:

[wel_565]

Wha? :ugh: I don't have any message on my phone. The only calls I had were from David and they were listed as unknown as I didn't pick up. Other then that, no calls that I didn't answer.
you jerk that was me!!!!!!! :faint:..my phone has been coming up private or unknown lately I don't know how to take it off...lol but I did leave you a message...:faint:

[wtcnbrwndo4u]

you jerk that was me!!!!!!! :faint:..my phone has been coming up private or unknown lately I don't know how to take it off...lol but I did leave you a message...:faint:
What type of phone do you have?

Normally, you'll want to go into Network Settings. You'll see a Caller ID setting and once you go in, you have the option to Send it or Hide it. Or something like that.

[Jintei]

Very nice..i like..

How much? are they primed?
shipping to 10305?

YGPM.

[Jintei]

PM me for pricing! :thumbup:

[SmutasticGT]

omg that varis...i want, pm you soon jintei, think I may be ready to try out ur groupbuys again lol

[Jintei]

omg that varis...i want, pm you soon jintei, think I may be ready to try out ur groupbuys again lol

Jeff! Sending you a PM now! :wave:

[wtcnbrwndo4u]

:wtc:

I want to have a Celica really bad now... :)... Hehe, I just want that BC2.

[Jintei]

Bump. PM me for pricing! :thumbup:

[Zero]

Jon did you get to try the front on?

[Cookie]

:worthless:

:fu: I'll try to snap some pics.

you jerk that was me!!!!!!! :faint:..my phone has been coming up private or unknown lately I don't know how to take it off...lol but I did leave you a message...:faint:

Didn't get no message. :ugh: I'll pick up next time, sorry.

Jon did you get to try the front on?

Nope sorry man. :(

[Jintei]

Jon did you get to try the front on?

Chad, just come over my shop and try it out yourself. That would be much better. Let me know! :thumbup:

[Jintei]

PM me for pricing.

[Zero]

Jon did you get to try the front on?

Chad, just come over my shop and try it out yourself. That would be much better. Let me know! :thumbup:
I'll go do that once I get the cash. That way, if it does fit nicely, I'll take it. If not, then I'll buy something else. :gap:
:chuckles:

[flyimages]

zero, since you're getting a new front, are you selling your vizage lip?

[Jintei]

All PMs have been replied! :)

Bump! PM me for pricing!

[Jintei]

2 weeks left.

[Jintei]

Bump.

[Jintei]

bump.

[Jintei]

Pm me for pricing! :thumbup:

[faultless18]

how much for the rear valence..

[Jintei]

how much for the rear valence..

PMed, Frey. :)

[Jintei]

PMs replied. :wave:

[Jintei]

Bump.

[Jintei]

PMs replied.

[Jintei]

Bump.

[trd_gts]

pmed you!

[Jintei]

pmed you!

Replied! :thumbup:

PM me for incredible pricing! :eek:

-David

[Jintei]

PM me for pricing! Fast reply guaranteed! :thumbup:

[Carcept GT-S]

Sending PM about the BRS kit, my front is crapping out on me. I'm surprised no ones jumped on it already.

[Celica Drift 27]

on the veilside rear..how is fitment? can you get some close ups? does it need priming? sanding? whats is needed before paint and clearcoat... is ita rough mold or is it smooth? anyone have pics of davids kit's fitment? thanks!

[Zero]

David, I should have the cash soon!

[whiteonwhite]

quote on the veilside full kit to 77086 plz. looking for a bk and cant decide which style to go for.

[2000 Silve GT-S]

Are you ever going to make a Trial Replica??

[Jintei]

Replied! :thumbup:

Sending PM about the BRS kit, my front is crapping out on me. I'm surprised no ones jumped on it already.

[Jintei]

on the veilside rear..how is fitment? can you get some close ups? does it need priming? sanding? whats is needed before paint and clearcoat... is ita rough mold or is it smooth? anyone have pics of davids kit's fitment? thanks!

PM replied.

[Jintei]

David, I should have the cash soon!

Sure, Chad. Just let me know! Call me if you want. :thumbup:

[Jintei]

quote on the veilside full kit to 77086 plz. looking for a bk and cant decide which style to go for.

YGPM.

[Jintei]

PMs replied.

[Jintei]

Bump.

[Jintei]

PM for pricing!

[Jintei]

:D

[Jintei]

bump.

[Jintei]

To the first page! :)

[verbal272]

question, these are fibreglass replica kits right?

[rotchcrocket04]

I'm pretty sure they are produced from FRP. Fiberglass Reinforced Polyurethane.

From what I was told, Trial makes their kits from FRP. Supposed to be some of the best material. Although, I fail to see how it is better than solely just having Urethane?? Jintei should provide some sort of information for you... because I don't really know what I'm talking about haha.

[rotchcrocket04]

EDIT: FRP proves to be useful because it is as light as Fiberglass and as strong as Urethane.

I still fail to see how it can be as strong though. Won't it still splinter if cracked like fiberglass?

[CocoBunnyXxX]

j/c what are you gonna do with all these kits after the gb is over?

[MKE]

i pm'ed you about 2 rears...

[Jintei]

question, these are fibreglass replica kits right?

FRP, not fiberglass only. Yes, like the title says, these are replicas.

[Jintei]

Can't go wrong with either FRP or Polyurethane.
Both have their own benefits.

Urethane: very strong, but heavy, EXPENSIVE.
FRP: not as strong as urethane, but lightweight and affordable.

Well, it doesn't matter if you got an accident, all kit wil be destroyed no matter what they're made of (urethane or FRP).

Yes, you're right. All JDM kits use FRP, not urethane.

EDIT: FRP proves to be useful because it is as light as Fiberglass and as strong as Urethane.

I still fail to see how it can be as strong though. Won't it still splinter if cracked like fiberglass?

[Jintei]

j/c what are you gonna do with all these kits after the gb is over?

I only make kits when it's ordered. So, no order, no kits. So, all kits are freshly made.

See the first post. There are numbers of the kits in stock.
What I mean by instock is, I would only take that much order and make the kit. After the GB is over, it's the company's decision whether to continue making the kit or not.

[Jintei]

i pm'ed you about 2 rears...

Replied.

[OrangeCelica5]

Pmed about Kaminari kit

[Jintei]

Pmed about Kaminari kit

Replied.

[Jintei]

Updated list and stock on the first post. Thanks.

PM me for pricing!

[Jintei]

Bump.

[Jintei]

Pms replied!

[Jintei]

Bump.

[Jintei]

PMs replied! :thumbup:

[Jintei]

PMs replied!!!! :eek:

[Jintei]

Bump, updated list.

[Cookie]

David, are you ever going to attempt to make that replica Varis rear again? I might need a spare. My car attracts damage like crazy...

[lpphreakx06]

Its your bad driving skillZ that attracts damage jon! :)

[Jintei]

David, are you ever going to attempt to make that replica Varis rear again? I might need a spare. My car attracts damage like crazy...

I'm not so sure about that. We'll see! :gap:

Its your bad driving skillZ that attracts damage jon! :)

lololol!

[Jintei]

PM me for pricing! :gap:

[wtcnbrwndo4u]

What happened with the Varis rear? Didn't replicate well?

[Jintei]

PMs replied! Happy weekend everyone! :thumbup:

[Jintei]

Updated list on the first post!

[Jintei]

Bump. PM me for pricing! :wave:

[Jintei]

Bump.

[Jintei]

PM me for pricing! 11 days left!

[Jintei]

bump.

[Jintei]

PMs replied! :thumbup:

[Jintei]

PMs replied!

[Jintei]

bump.

[Jintei]

PM me for pricing! 1 WEEK LEFT!

:eek:

[wel_565]

Sending PM about the BRS kit, my front is crapping out on me. I'm surprised no ones jumped on it already.
:headbang:

[Jintei]

PMs replied! 7 DAYS LEFT!!! Hurry up and PM me for pricing! :eek: :eek: :eek:

[Jintei]

bump!

[Jintei]

MORE VEILSIDE IN STOCK!!!!

http://i46.photobucket.com/albums/f109/Nimrodcelica/Veilside/front.jpg
http://i46.photobucket.com/albums/f109/Nimrodcelica/Veilside/DSC06101copy.jpg
http://i46.photobucket.com/albums/f109/Nimrodcelica/Veilside/DSC06102copy.jpg
http://i46.photobucket.com/albums/f109/Nimrodcelica/Veilside/DSC06105copy.jpg

7 DAYS LEFT!!! PM ME FOR PRICING!!

[Jintei]

6 Days Left!!!! Come And Get 'em!!! :eek:

[Jintei]

PM me for pricing! :thumbup:

[Jintei]

Updated List!!!

[OrangeCelica5]

PMed you, paypal payment sent!
Thanks!

[Jintei]

PMed you, paypal payment sent!
Thanks!

Received! Will ship on Friday! Thanks! :thumbup:

-David

[Jintei]

updated List!!! 6 Days Left

[sleepy_celi]

ygpm

[DIRomberger]

Would you next time pick up some trial kits to add to the GB im looking for a nice replica one.

[Jintei]

ygpm

Replied! :thumbup:

[Jintei]

5 DAYS LEFT!!!! HURRY UP AND PM ME FOR PRICING!!!!! :eek: :eek:

[CocoBunnyXxX]

I only make kits when it's ordered. So, no order, no kits. So, all kits are freshly made.

See the first post. There are numbers of the kits in stock.
What I mean by instock is, I would only take that much order and make the kit. After the GB is over, it's the company's decision whether to continue making the kit or not.


Wow. that's awesome. Free bump :)

[Jintei]

Wow. that's awesome. Free bump :)

Thanks, Ana. Your kit is being packaged. Tracking # will be up soon! :thumbup:

[Jintei]

UPDATED LIST!! 5 DAYS LEFT!!! PM ME FOR PRICING! :thumbup:

[00yesitsagts]

kam kit shipped to 21236, and how long from when i send payment until i receive

[M28Matrix]

You got PMed. :eek:

[Jintei]

^^Both of you, PM replied! :thumbup:

[drewd]

How much for mesh grill for TRD front bumper?

[Jintei]

How much for mesh grill for TRD front bumper?

Not for sale separately, sorry.

[Jintei]

PM me for pricing!

[Jintei]

bump.

[M28Matrix]

I like the looks of the TRD front/ side skirt and the Veildside rear. Will the lines look weird if I go with that combo?

Matt

[OrangeCelica5]

Just wondering if my kit has been shipped out yet? Does it come with the mesh grill?
Haven't received any confirmation or tracking # yet.
Thanks!

[Jintei]

I like the looks of the TRD front/ side skirt and the Veildside rear. Will the lines look weird if I go with that combo?

Matt

Yes, it will look weird. :)

[Jintei]

Just wondering if my kit has been shipped out yet? Does it come with the mesh grill?
Haven't received any confirmation or tracking # yet.
Thanks!

PM.

[Jintei]

4 Days Left!

[Jintei]

updated List.

4 Days & 4 Spots Left!

[Jintei]

Everybody who has paid in full has been PMed about their tracking #.

[M28Matrix]

Yes, it will look weird. :)

Hi David,
Ok, then I am leaning more towards getting the TRD replica kit. :wiggle: From your pictures, I noticed the rear valence is green when it is unpainted. Is it made of a different material?

Thanks,
Matt

[Jintei]

Hi David,
Ok, then I am leaning more towards getting the TRD replica kit. :wiggle: From your pictures, I noticed the rear valence is green when it is unpainted. Is it made of a different material?

Thanks,
Matt

Sounds good. No, they're the same material. The green color is just the gel finish. It doesn't matter. You'll get the white one (freshly made). :thumbup:
Let me know so we can place your order! :)

-David

[Jintei]

PMs replied! 3 days left.

[M28Matrix]

Payment sent for the TRD full body kit.

Thanks.
Matt

[Jintei]

Payment sent for the TRD full body kit.

Thanks.
Matt

Recieved! Will ship ASAP! You're on the list! :thumbup:

[Jintei]

updated List!

3 Days Left!!!

Pm Me For Pricing!

[sTyLn_GTS]

newb question, what does FRP stand for? Also interested in price for TRD kit, Kami kit, Buddy club 2 kit, TRD spoiler, shipped to 85249. Great if u can list price for each piece individually so i can mix/match. Thanx!

[Jintei]

newb question, what does FRP stand for? Also interested in price for TRD kit, Kami kit, Buddy club 2 kit, TRD spoiler, shipped to 85249. Great if u can list price for each piece individually so i can mix/match. Thanx!

YGPM.

[sTyLn_GTS]

nope, no PM received yet. can u PM again plz ?

[Jintei]

nope, no PM received yet. can u PM again plz ?

lol, you're too fast. :gap: check it again!

[Jintei]

bump, 2 days left!!!! PM ME FOR PRICING!

[RadeonX]

PM please for TRD 58104

[SilvrGTS]

pmed

[Efiamu187]

can i get the veilside rear bumpber single exhaust how much!!

[skreemin_trdgts]

Jintei, I desperately am in need of a BC2 front bumper only. Do you have one of these available or do you only have the full kit?

[skreemin_trdgts]

If so PM me the price shipped to 22630. Thanks and I'll get right back to you.

[Jintei]

PM please for TRD 58104

PMed.

[Jintei]

pmed

Replied! :thumbup:

[Jintei]

can i get the veilside rear bumpber single exhaust how much!!

Clean your inbox, please...

[Jintei]

Jintei, I desperately am in need of a BC2 front bumper only. Do you have one of these available or do you only have the full kit?

Individual piece option is available.

[Jintei]

2 days left!!! PM me for pricing!!!

[tonycortes]

Can you PM me price for just the front bumper (veilside). 93638 zip code

[cpta2020]

Any TRD FRONT LEFT?

[Jintei]

PMs replied. Yes, TRD front still available. PM me for pricing!

LAST DAY OF THE GB!!!

[Jintei]

bump. last day! :)

[wasabi88]

Jintei...I sent u a pm for trd and bc2 front bumper...are you shipping in Canada, Quebec?

[skreemin_trdgts]

Jintei, I desperately am in need of a BC2 front bumper only. Do you have one of these available or do you only have the full kit?

Individual piece option is available.

Cool! Pm'd you and Paypalled you too. Thanks David!

[Jintei]

Jintei...I sent u a pm for trd and bc2 front bumper...are you shipping in Canada, Quebec?

Yes, I ship to Canada.

[Jintei]

Cool! Pm'd you and Paypalled you too. Thanks David!

Deposit received! You're on the list. ;)

-David

[Jintei]

Bump for the last day.

[Jintei]

PM me for pricing!!!! :eek:

[M28Matrix]

Hi David,
What's my tracking number?

Thanks,

Matt

[GT-Skid]

can you give me a price for a Kam Kit and then a single price just for the Kam front bumber. I have the Kam Kit already and it is messed up pretty bad. Shipping would be to a commerical address and the zip is 15618.

[Jintei]

Hi David,
What's my tracking number?

Thanks,

Matt

Matt,

You'll get it this evening. It takes time.

-David