Greddy Turbo Timer install

[euromotorsports]

Hi I am new to these forums, and was looking on how to install a greddy turbo timer. I searched the forums and found a link for an apexi install but the link seems to be dead. Any help would be greatly appreciated or a wire diagram would be nice

[EuGeNiLe GTS]

red (power) to constant 12v, black to ground, green to ign, you dont even need to hook up the blue wire. if you still want to, hook it up to ign2 if your car has 2 igns, if not, to acc.

done, simple stuff. its been the same for the past 10+ years. new turbo timers, same wiring and colors.

oh if you care to use those optional crap features, speed sensor, check your ecu pin for the speed sensor wire tap into that, and ebrake, look by the ebrake for a wire, tap to that. if it has crap narrowband o2 and you insist you must use it, look at your ecu pin outline and tap into o2. voltage is read by the 12v power wire you connect it to.

its so simple, instead of paying $15-20 for that harness, ill do it for you for $10, and if you have an aftermarket alarm i can hook it up so you can arm it no problem, WITHOUT using relays, anybody who needs to use relays/diodes and crap to make it function, well no comment :)

[imhotep]

can i put turbo timer on a S/C car? perhaps a clica? :gap: or its just a waste of money?

[euromotorsports]

I don't think it would help much as an eaton blower has it's on internal oil system and doesn't run off engine oil

[euromotorsports]

I don't think it would help much as an eaton blower has it's own internal oil system and doesn't run off engine oil