New Pics of my car with the 3rd kit

[mksgts]

pics (http://www.newcelica.org/ubb/Forum28/HTML/000437.html)

[Blk00SS]

I don't understand why everyone gets a wing like that... 90% of them are NOT gonna Roadrace. Waste in my opinion but the rest of the car looks good

[redcel180]

Hey, the wing is phat. That looks a lot like my car, except a lot higher and full kit (not a lip). Nice car.

Brett

------------------
'00 Red Celica GT-S
TRD accessories
TRD headlamp covers
TRD Exhaust
RMM Intake w/ heatshield
RMM Strut Tower Brace
PG XS4600
MB Quart 6.5 comp. system
12" sub
Custom Grill
18" Enkei RSF-2s wrapped in Yoko Parada 215/35/18s
GC coilovers
TRD rear strut brace
CF hood with custom scoop - MB Autosport
Hood pins
RMM full kit w/ APR spoiler
EL Indiglos
APC CF gauge trim kit
Autometer 5" Tach w/ SL
Hotchkis rear camber kit
TRD street clutch and cover

[sc_celicalady]

Yea...It's looks a lot like my car too...except for the hood...and the rims...and mine has springs. But looks good!!!

a lot

------------------
Candace
'00 Red Gt 18" Katana c-7's TRD Lowering Springs 12" MTX 8000 MTX 102 Amp WW Body kit C-One Hood Scoop(On the Way) Blitz Style Front Bumper APR Replacement Wing Headlight Covers Indiglo gauges Speed Grill Red Dash Kit Injen short throw Euro clear tailights Euro clear bumper lights Pioneer double din deck TRD Extended Exhaust Momo Shift Knob 20% Tent Red Seat Inserts
Future Mods: Corbou Racing Seats Air Rod Adjustable Suspension Sunroof House of Colours Candy Apple Red Shaved Door Handles And what ever crosses my little mind!!!!

[Brett]

Looks pretty sweet. Very clean! Love the Blitz front, though I woulda gone with different sideskirts and rear valence. But still looking damn sharp! Keep it up!

------------------
<IMG SRC="http://lightning.prohosting.com/~kain123/siggy.jpg" border=0>
Click Here (http://y42.photos.yahoo.com/bc/fugiflyer/lst?.dir=/&.src=ph&.done=http%3a//y42.photos.yahoo.com/bc/fugiflyer/lst%3f%26.dir=/2000%2bToyota%2bCelica%2bGTS%26.src=ph%26.view=t&.view=t) for Pictures

TRD Style Spoiler
Tanabe Precedeo Super Down Springs 2"
S2000 antenna
APC Frosted Clear Corners

[yota_racer]

I am liking the whole setup with the exception of the side skirts. I had the same front and rear before I got my custom kit started. I personally like it with RMM side skirts. That would look really good. IMHO Can anyone photoshop that pic with RMM sides instead of the other ones? That way you can all see what I mean.

------------------
yota_racer@yahoo.com
Silver GT-S 6 Speed
Sponsored by Importfan.com (http://www.importfan.com)

[TRD-GT]

mksgts:
dam man that looks really sweet, the wing is not my style, but in youre car looks hella sweet....keep it up

------------------
<IMG SRC="http://imagep.webphotos.iwon.com//1000012857/1000012857_9152001123550AM7.700747E-02.jpg" border=0>
beto

[tagurit]

loose the wing, and why dont any of you paint CF?? you got the CF stuff b/c its light right? not for looks!! I must be missing something.

------------------
TWIN TROUBLE

when the green light drops, the bull**** stops

[00CericaRuss]

Originally posted by tagurit:
loose the wing, and why dont any of you paint CF?? you got the CF stuff b/c its light right? not for looks!! I must be missing something.



I've always wondered that myself

------------------
<IMG SRC="http://russ.angrypacket.com/pictures/sig/00CericaRussSig.jpg" border=0>
rjohnson@angrypacket.com - Website (http://russ.angrypacket.com) - Make indiglos (gas/temp) (http://russ.angrypacket.com/howto.php?subsect=diy-indiglo-gauges&section=carstuff)
Bay Area Celica Forums (http://forums.baycelicas.org)

[PBI_ceLL]

hey, I'm on my second kit, im catchin up!...IMHO I think blitz kits only look nice on Supras for which they were made. I've seen a few blitz celicas around and expect to see a lot more (FNF fever) At any rate the car looks clean. Good job, bro..

------------------
~Representin TX Celica Club~
Mods:
R.I.P. R2 Kit
::Rod Millen front end..
::R2 Sides and Rear..
::Clarion Auto PC..
::Ground Control Coil-overs on GTS struts..
::Carbon Fiber Altezzas with strobe reverse lights..
::APC clear corners..
::Custom Exhaust..
::Removed Butterfly..
::Tie-fighter spoiler on the way::
~TCC Position: Tribe consultant~

[EuGeNiLe GTS]

wow not bad.. i dont really like chrome-ish rims.. but those look nice on the car.. but yea just need them fog lights.. also yea im not fond of the buddy club sides/rear.. and is it just me or does the car look high.. but looks clean.. good job..

[cbr600drm]

Tagurit....Most if not all of the carbon fiber parts for our cars and other street cars are not actually all carbon. They are usually mostly fiberglass with a few layers of carbon on the outside. So...If it is not for the carbon appearance then it is pretty much a waste. It just adds to the race car look. They may still be a little lighter than the stock parts, but not like all carbon.

[PBI_ceLL]

hey, I'm on my second kit, im catchin up!...IMHO I think blitz kits only look nice on Supras for which they were made. I've seen a few blitz celicas around and expect to see a lot more (FNF fever) At any rate the car looks clean. Good job, bro..

------------------
~Representin TX Celica Club~
Mods:
R.I.P. R2 Kit
::Rod Millen front end..
::R2 Sides and Rear..
::Clarion Auto PC..
::Ground Control Coil-overs on GTS struts..
::Carbon Fiber Altezzas with strobe reverse lights..
::APC clear corners..
::Custom Exhaust..
::Removed Butterfly..
::Tie-fighter spoiler on the way::
~TCC Position: Tribe consultant~

[XtremeRacer]

Very nice car man, looks really good..

------------------
Current: '98 Blk Mustang (Selling)
Coming Soon: '99 GSX or '01 GTS

[ArchangelX]

Welps..

I suppose if you're going for that look..it's well done.

I stay away from bodykits like that..simply because they're in one year..and then out the next.

I've seen a few Civics running around with that same style kit..and for the life of me..I can't figure out WHY there's a huge TRIANGULAR shaped wedge on that bumper.

I like a nice clean ride that you'd be able to take your girl out to a nice restaurant without getting stared at like you were straight outta the FnF.

Just my taste though...props to you for all the work put into it.

Hint: Turn your front wheels whenever you take a profile shot..it looks badazz...and shows off your rims better.

[Xlr8_10]

Hey man, sweet set up! I love those rimz, I was just lookin at them in a mag today wishing I had them. I also like the wing, I know most people don't approve, but hey man whatever floats your boat! Keep up the good werk n try to fill wheel gapz a lil. <IMG SRC="http://www.newcelica.org/ubb/smilies/cwm4.gif" border=0>

[celica gte racing]

Originally posted by Blk00SS:
I don't understand why everyone gets a wing like that... 90% of them are NOT gonna Roadrace. Waste in my opinion but the rest of the car looks good

they are highly useless unless you do circuit racing, even in street racing its useless. why do they have to put such an oversized one????

[Kry]

Originally posted by celica gte racing:
they are highly useless unless you do circuit racing, even in street racing its useless. why do they have to put such an oversized one????

it's FnF effect.......
remember those s2000, eclipse, supra with big ass GT wings in the movie?

knock on the wood.

------------------
"The feeling you get from a good drifting is euphoric, almost spiritual. The car and you as one."
Night Speed (http://www.joe.chiang.com/tns/)

[Brett]

Just curious regaurding the painted Carbon Fiber - Does the paint just go on like fiberglass? and also Doesn't the paint weigh a good amount + clear coat? So painting it would just be adding weight, somewhat defeating the whole purpose right?

Any pictures of a painted fiberglass hood?

------------------
<IMG SRC="http://lightning.prohosting.com/~kain123/siggy.jpg" border=0>
Click Here (http://y42.photos.yahoo.com/bc/fugiflyer/lst?.dir=/&.src=ph&.done=http%3a//y42.photos.yahoo.com/bc/fugiflyer/lst%3f%26.dir=/2000%2bToyota%2bCelica%2bGTS%26.src=ph%26.view=t&.view=t) for Pictures

TRD Style Spoiler
Tanabe Precedeo Super Down Springs 2"
S2000 antenna
APC Frosted Clear Corners

[cbr600drm]

Painting CF is prety much a matter of priming it and painting it. Depending on the amount of porosity in the material sometimes it takes a little filler to get it nice and smooth. Regarding the weight, I don't know numbers or anything but it does add a surprising amount of weight. I do bodywork for the prototype sports car team I work for. When we get a new nose from the composite shop it is really light for its size. After it gets back from the painter it is verry noticably heavier.