RJ Autoworks GTS gauge faces: Black/White and Silver/Black

[evil eye]

Hey guys,

I had the center tach conversion done a while back, so I no longer have a need for these OEM style gauge faces. They were made by Russ, of RJ Autoworks. These are no longer being produced. They are of very high quality and feel/look just like the OEM gauge face.

Please note, the black one has some some minor damage to the bottom right corner by the fuel/temp area, and the lower left corner, between 2k and 3k RPM's. You can see it in the pic. The clear sheet has seperated a bit from the black face, and it looks lighter in color now. Please check my installed pic a few posts down for reference.

Both faces have red see through sheets taped behind the turn signal area, so that they would glow red. These can easily be removed.

Silver face: Sold to gtskev

Black face: Sold to oONoGoAutoOo

[sn1p3r845]

i WOULD Take one, but I live in Canada (km/h)

sorry :(

i would rather the big numbers be in km/h

[Celica402GTS]

bump for rareness..

[deercelica]

any pics installed?

[getmadboy]

i did the center tach too....if i didn't, that silver one would be mine. bump for a sick looking gauge face!

[gtskev]

Ugm.. Bump

[evil eye]

Ugm.. Bump


PM replied.

[evil eye]

Installed pics:

BLACK/WHITE

http://www.newcelica.org/photopost/data/500/4741Interior_02.jpg

http://www.newcelica.org/photopost/data/500/4741RJ_black-white_GTS_red_LED_04.jpg

[evil eye]

I don't have any installed pics of the silver for some reason in my gallery. I'll upload some when I get home.

[gtskev]

payment sent. thanks man this will be great.

[03GTSTRD]

You have a PM

[evil eye]

Silver/Black sold to gtskev. Thanks!

[Cookie]

Damn, that looks pretty nice Joe. Hmm...

[evil eye]

Damn, that looks pretty nice Joe. Hmm...


Buy it foo!

Black/white still for sale.

[evil eye]

Another pic:

[03GTSTRD]

Buy it foo!

Black/white still for sale.
I guess my offer was denied. :ugh:

[vegeta4ss]

damn joe, I asked you where to get these like a year ago. Bought dooly's overpriced "custom" ones...and then you put these up for sale.

sheesh. :gap:

bump for a good seller. I've contacted Russ about selling what's left of these gauges and he wont do it. So this is...it.

heck if i had extra cash I'd take this as a backup. My dooly one has been doing some discoloring in one area and its starting to show through.

[03GTSTRD]

You have another PM.

[MKE]

is the spot at 2.5k rpms a lens glare or is it the same type of thing thats happening to the right side?

[lpphreakx06]

Please note, the black one has some some minor damage to the bottom right corner by the fuel/temp area. You can see it in the pic. The clear sheet has seperated a bit from the black face, and it looks lighter in color now. You cannot see this at all once installed. Please check my installed pic a few posts down for reference.

Nice skimming, it wasn't like it ad was hard to navigrate. sheesh.

[kaminaricelica7]

hey...do you have a red led conversion in the picture of it lit up?

my main question is...if i directly switch the gauge face (from my stock orange stuff) will it show up like it does in that pic...?

^ i know you changed/painted the needle red...

[MKE]

Nice skimming, it wasn't like it ad was hard to navigrate. sheesh.


we are talking about 2 different spots. I dont know about you, but when i look at my tach i can clearly see the space inbetween 2 and 3k rpm's.

Now, the spot he was referring on the right side, next to the fuel gauge, he's right. i cant see that.

Waiting for OP's response.

[evil eye]

is the spot at 2.5k rpms a lens glare or is it the same type of thing thats happening to the right side?


You're absolutely right, good eye! I had to check it again after you said that, and sure enough it's right between the 2,000 and 3,000 RPM marks. Sorry about that, I wasn't trying to pull a fast one over you guys. I honestly didn't notice it. It must have happened in storage, because it wasn't like that when I had it installed (see pic few posts above). I'm lowering the price as a result. 03GTSTRD has first dibs, I'll let you guys know if he changes his mind.

hey...do you have a red led conversion in the picture of it lit up?

my main question is...if i directly switch the gauge face (from my stock orange stuff) will it show up like it does in that pic...?

^ i know you changed/painted the needle red...


Yes, it has a red LED conversion done to it. If you do the conversion but leave your stock gauge face on, it will look orangey/red during the day and completely red at night. With this gauge face, it will look red all the time.

[evil eye]

Ttt

[evil eye]

Black/white gauge face still for sale.

[evil eye]

Up

[evil eye]

Jeez, any offers please?!

[dapsteez]

i WOULD Take one, but I live in Canada (km/h)

sorry :(

i would rather the big numbers be in km/h


:werd: I've been looking for a KM/H one as well. Oh well, free bump!

[lpphreakx06]

Jeez, any offers please?!

1$..

[lpphreakx06]

my bad, shipped of course.

:)

[evil eye]

I hate you Tuan Tuan. Not Tom Tom... Tuan Tuan.

[evil eye]

^^^

[evil eye]

Buy...me...please!

[supracelica32]

looks so pretty..a shame that im broke..

[03GTSTRD]

$20 shipped :chuckles:

[evil eye]

Not ready to dip that low just yet. :D

[evil eye]

Up

[supracelica32]

message me on aim when you get a chance..

[evil eye]

IM'ed you.

[evil eye]

Still for sale.

[evil eye]

Ttt

[evil eye]

Up

[evil eye]

Am I selling posion here?

[vegeta4ss]

Am I selling posion here?
I think you just missed the boat of people who missed out on Russ's original gauges and just bought Dooly's as soon as the came out. Now the demand isn't nearly as high...

That's what happened with me...I contacted Russ many times and he finally told me that he had some left but had no idea where they were stored in his new house. So at that point I just paid a ton more and got mine done by Dooly.

If i had thought it through a little better I would have bought this for a local guy for x-mas. I know he did the gauge conversion and wasn't super happy with the orangeish tint still on his new leds. Oh well..

[03GTSTRD]

you have a pm

[evil eye]

Am I selling posion here?
I think you just missed the boat of people who missed out on Russ's original gauges and just bought Dooly's as soon as the came out. Now the demand isn't nearly as high...

That's what happened with me...I contacted Russ many times and he finally told me that he had some left but had no idea where they were stored in his new house. So at that point I just paid a ton more and got mine done by Dooly.

If i had thought it through a little better I would have bought this for a local guy for x-mas. I know he did the gauge conversion and wasn't super happy with the orangeish tint still on his new leds. Oh well..


Yeah, I think you're right Tanner. This sucks. :sadpace:

you have a pm


Replied.

[lpphreakx06]

wayy overpriced..:)

[evil eye]

Fine, how does $39.99 shipped sound then? :chuckles:

[evil eye]

Up

[oONoGoAutoOo]

30 shipped!!!!!!!!

[evil eye]

Hoan, you have PM.

[oONoGoAutoOo]

Replied, and payment sent Joe!

[evil eye]

Sold to Hoan!

Thanks for the interest guys. :wave:

[lpphreakx06]

what interest? :faint:

[evil eye]

Actually, you're right.

Thanks Tuan for your interest. It was solely yours. :chuckles: