PDA

View Full Version : About Konig Tantrum

BulracerGT'01
06-10-2002, 08:37 AM
I have them and one of the nuts is broken(for those who have them know how they llook).It doesnt want to come off,the tool just slip inside.Any help how to is greatly appreciated!
Mistrimeat
06-10-2002, 09:09 AM
Do you mean the screw that holds the centercaps on??? IF you stipped that out you might have to drill the bolt out and get a replacement from Konig. Otherwise, I dont have a fvckin clue what you are talking about.
dfess1
06-10-2002, 09:21 AM
Cyrojack had the same prob about 3 months ago. You're gonna have to drill out the stud, and get a replacement. Have fun, took him 2 titanium drill bits...
BulracerGT'01
06-10-2002, 10:10 AM
Noooooo,I'm talking about one of the 5 nuts that holds the wheel to the car.The nuts of the Tantrums are ring shaped,so one of them is cracked.Thats the problem!
po9i
06-10-2002, 10:30 AM
lugnut you mean
BulracerGT'01
06-10-2002, 10:36 AM
:thumbup: yup!
dfess1
06-10-2002, 11:33 AM
So the lugnut is cracked? Can you get it off? I'm not understanding the problem...
BulracerGT'01
06-10-2002, 11:43 AM
i cant,thats the problem...
dfess1
06-10-2002, 11:45 AM
So heat it up, crack it in half, and get a new one. Or get something larger than the key they gave you, so it won't spin.
TRD StreetRacing
06-10-2002, 10:19 PM
i had the exact same problem.......get a socket that fits ur lug.....the one that fit my lock was a 3/4 socket.....MAKE SURE IT'S A 12 SIDED SOCKET....NOT THE 6 SIDED ONE...then when u get a 12 sided one, of the size that almost fits......get a hammer and bang the sucker onto the lug nut or lock....then u can turn it w/ a wrench which fits onto the socket;)
BulracerGT'01
06-11-2002, 06:58 AM
Thanx bro!
TRD StreetRacing
06-11-2002, 10:21 PM
i would say "no problem....and ur welcome" but i'm not too sure if u used my method or dfess1:wtf: and did it work??