Rear Panal Removal

[hellr]

Could anyone help me with how to remove all of the rear plastics in the car (including the plastics on the hatch)? I found a site a while back which explained it but I can't for the life of me find a link to it again! Thanks

[Blue Bomber]

The panel on the hatch itself is easy. Just take out the screw in the handle, then pull the panel off. It's entirely held in by clips.

The center rear panel is held in by two screws holding in the metal loops, two clips on each side (push center in on them) and one big clip in the middle (I think its a philips head clip). Once they're removed, just pull the panel out from the bottom, then up.

The sides are held in by the two screws holding the hooks on the sides (for cargo net), two philps head screws towards teh front behind the seatbacks, and the brackets of the seatbacks.

To remove the seatbacks, fold them down. There will be two large bolts at the base of each seatback. Remove them, then push the seatback down then forward to take it out.

The right rear panel also is attached to the interior light, so you'll need to disconnect its wiring harness to remove the panel.

[hellr]

Thanks!