PDA

View Full Version : any one good with wiring?


dustin02gts
04-11-2008, 10:03 AM
i have an ac autotechnics indiglo gauge overlay and the light behind it flashes on and off like a strobe light and sometimes stays off. very annoying:puke:anyone have any suggestions?

02celica
04-11-2008, 12:57 PM
shorting out maybe?

v3bahumut
04-11-2008, 12:58 PM
Loose connection somewhere I would think.

2way
04-11-2008, 02:43 PM
Not sure if that is the brand..... but, I recall alot of controller problems/failures w/one brand of indiglos.

chillan420
04-12-2008, 10:11 AM
i always have a spare inverter or (controller) just in case. they can be found very cheap here http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=020&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=300213605502&rd=1

TRDCelica1
04-12-2008, 10:27 AM
Check your ground wire connection....if your ground wire is going to metal make sure to remove the paint so your connector is touching 'bare' metal. If not get a new invertor.

ekindbest
04-12-2008, 12:44 PM
^ werd

CelicaBigginer
04-12-2008, 12:57 PM
I thinks maybe a loose connection.

dustin02gts
04-13-2008, 11:44 AM
allright thanks. i was leaning towards a short. more than likely it will have to do with the actual bulb itself right? i dont know if anyone else has aftermarket gauges like that. i didnt install it so i guess ill just have to take it out and look. the dealership that i got the car from tried to charge me $270!!!

CEGONAX-MAN
04-13-2008, 11:55 AM
I used to do harness and soldering militay spec on the training stinger missle luancher's for a company called DBA Systems in florida, but that's been almost 20 years ago...:shrugs:

I think i still know how to test wire polarity?...Anyways good luck.