celica 1zz 6spd TRD supercharged ECHO

[RXvedub]

Been a while since i posted here.

I rolled my 2000 celica @ willowsprigs raceway back in 2003. hung on to the 1zz 6spd setup i had to build a 4door echo.

well i finally did it.

2000 echo 1ZZ(celica) 6spd TRD supercharger AEM FIC controler

http://i59.photobucket.com/albums/g289/rxvedub/echo/IMG_4957.jpg
http://i59.photobucket.com/albums/g289/rxvedub/echo/IMG_4959.jpg

[TRlPPlN]

damn i remember you. thats some good power for a light weight car.

[S|Lv3rBu||et]

Holy crap! :AF:

More pics please? A lot more pics....

edit: just a thought, if you rolled your celica... do you really think you'll fair better with an echo?

[JayP]

Very nice, great project

[Boosted2.0]

Thats awxome - how do you like the Echo with the extra power?

Those things always impressed me with their high speed handling. TONS of body roll, but once the vehicle settles on the bump stops it sticks in a turn remarkably well.

[Magusownz]

Wow good work! Have you taken it to the track as of yet?

[v3bahumut]

183 out of a supercharged 1zz, are those numbers accurate?

I'm dyno illiterate, which ones read high, low?

[Smaay]

impressive, how do you like the AEM FIC?

[jlitman]

Holy crap! :AF:

More pics please? A lot more pics....
:werd:

Wow -- cool!

What are you using to run the gauges -- two ECU's plus AEM? Looking forward to more pics and more details -- nicely done :thumbup:

[h8eternal]

sucks about your car
how did you roll it over?
that is a sick echo though
any videos?

[SLVR Stealth]

That echo is a crazy sleeper!

[Illusive]

most people here dont realize how good the echo can handle and how EASY it is to take one to its limits.

dropping a supercharged 1zz / 6spd trans into one takes care of my only issue with the car which is lack of power.

Awesome job.

[kimGT]

Nice work! I remember you posting the picture of your rolled celica and you were posing with a smile right next to it, lol.

[oONoGoAutoOo]

wow, great work.

[Punkers7465]

That echo has to be a blast to drive! More pic's!

[Kangaruu]

Lol wow! Sorry but I've always thought Echos were kinda lame :sadpace:

But this one is a big :thumbup:

Show us videos of it at the tracks please :)

[redbull]

I rolled my 2000 celica @ willowsprigs raceway back in 2003.
What happened? I’m guessing the back end came around on you possibly in a chicane which sent you sideways in to the grass and flipped it.

Do you still have any pics? And videos of the echo are a must.

[bunkkaws84]

my only question is........why?

its an echo man...... an echo.

Otherwise for what you were able to do, is quite impressive.

[ekindbest]

nice

[hombredelassrta]

very nice

[Kurai]

thats a fast a** echo....good work

[celicajonz]

awesome!

any more pics?

[CEGONAX-MAN]

Well blow mi down agagagaagaaa.

[robare99]

my only question is........why?

its an echo man...... an echo.

Otherwise for what you were able to do, is quite impressive.


Sometimes you don't ask why.....


you ask why not.


:D



Good stuff! More pics!

[Aka Rafa]

hell yeah! thats my boy right there......i have seen this thing in person, and its pretty damm jaw dropping what hes done with that echo. big up's :bowdown::bowdown:for finally getting that supercharger installed..........i kept asking to buy it from him...lol :headbang:

[RXvedub]

Need your help people!!!

WTB: 1zz Cams and Valve springs or anything to build /w
Im looking for upgraded Cams and Valve springs for a 1ZZ-ge


Boosted or race cams dont matter.
Crower or MWR or who ever the hell makes them.

Or i will consider anything els to build a motor with ie: head studs, gasket, pistons, crank but no electronics needed.

Tell me what you have to get rid of.


http://farm1.static.flickr.com/146/373977128_6d315a8bcb.jpg


hell yeah! thats my boy right there......i have seen this thing in person, and its pretty damm jaw dropping what hes done with that echo. big up's :bowdown::bowdown:for finally getting that supercharger installed..........i kept asking to buy it from him...lol :headbang:

Raffa is that you???

[CeLestialGT]

real nice! I guess thsi wouldnt fit in the hatchback version rigth?

[Smaay]

i have some stock 1ZZ cams. but thats it. i mistly deal with 2ZZ stuff. speaking of which, why are you not using a 2ZZ?

[on3 l0st celi]

how do u put on 6spd on a 1zz celica i kno its a noob question....:shrugs:

[afgsk8er]

:faint: ^

[SuperDave]

Did the 6 speed clear the chassis rail? Or is it cut and stepped/other solution?

[Aka Rafa]

Raffa is that you???

................. yep

[Smaay]

how do u put on 6spd on a 1zz celica i kno its a noob question

you bolt it on

[bt216]

you bolt it on
:rimshot:


:laugh:!!!!!!!!!!!

[MADANGEL]

^LOL but, true, it is the same bolt pattern

[RXvedub]

Thanks guys.

I used a 1zz because I had one from my Celica i flipped. plus I wanted the supercharger with the 6spd.

The tranny did not clear the rail and neither did the motor. I had to notch the tranny side and cut the engine side.

I am going to switch to an AEM EMS so I will run higher revs and the 5th inj will be 100% methanol.

so seriously I want Valve spring and maybe cams.

[kidGT]

way to rep northridge!

[SuperDave]

The tranny did not clear the rail and neither did the motor. I had to notch the tranny side and cut the engine side.

Interesting. You don't happen to have any photos of it?
A couple people have tried the 2zz + 6speed in Australia with all projects stopping due to the rail (main cause is either budget blowouts or hack workshops that can't get things straight).

Good stuff for succeeding :thumbup:

[jlitman]

Thanks guys.

I used a 1zz because I had one from my Celica i flipped. plus I wanted the supercharger with the 6spd.

The tranny did not clear the rail and neither did the motor. I had to notch the tranny side and cut the engine side.

I am going to switch to an AEM EMS so I will run higher revs and the 5th inj will be 100% methanol.

so seriously I want Valve spring and maybe cams.
I don't know that the cams were making great power on the 1ZZ (or the 2ZZ for that matter) -- are the valve springs to rev higher? I'm not sure the 1ZZ will make much power reved past fuel cut, although the S/C may change all that.

PM Jcanracer, I think he has them and he might have some good input for you.

You might look into replacing the factory header with the PPE 1ZZ header, assuming it will clear everything. That might also make reving higher worthwhile.

Remember, if you use 100% methanol for the 5th injector, you will need A LOT of methanol relative to gasoline to handle the extra fueling requirements-- stoich for methanol is around 6:1.

Make sure you inject after the S/C (I assume that's what you're doing) -- a methanol backfire could toast the S/C.

Any way to put a smaller pulley on the S/C, or is it pretty well maxed out as is?

[CeLestialGT]

man i want more info on that!! does the 1zz fit more easily then the 2zz? i kinda like those echo hatchback ! if i could find one wrecked of front cheap and put a 1zz that would do it for me!

[CeLestialGT]

if anyone got info on that tell me lol im super interested in this! how much we are talking in labor to do that?