Possible lips for my bumper???

[whiteTRD]

Hey guys, I no i posted this b4, but I really want to get a lip 4 my bumper, just wondering about the possibilities of fitting the trd lip to it, ave tried 4 lips so far, 96-97 civic jun lip, 99-00 civic type r lip, celica 98 lip, skyline lip, dont want to have to doctor the lips to fit, well nt too much.

http://file046b.bebo.com/6/large/2008/08/29/15/360057176a8760305917l.jpg

Any ideas will help guys

[whiteTRD]

Does any one know if this lip fits the trd bumper??

http://file044b.bebo.com/5/large/2008/09/03/17/360057176a8800404914l.jpg

[Rcelica24]

poor guy...i know this sucks

[Dj_NorthStar]

I love the TRD search lip. And the JDM search lip looks really good.

Seriously, search.

[cuco]

why dont you try something like a diffuser instead of a lip that would look better in my opinion.

[Mister Celery]

c-one lip!

trial side skirts

trd rear :) thats a banging combo right there

[Dasher17]

Are you looking for something to add on to your TRD bumper? If so just get a diffuser.

[whiteTRD]

Ye, thats all i want but cant find 1. Where would i even start to look for a diffuser?

[whiteTRD]

The sides and back of the TRD kit are about 1 1/2 or 2 inches lower than the front bumper and i'm looking for an extension for the bumper 2 even this out

:burnout:

[cuco]

well am not sure if the the diffuser for the camari kit will work with the TRD bumper but i bet it will. as far as compensating for the differences and height i think that with the diffuser and a drop you will not be able to tell the difference.

[Dasher17]

Which diffuser does Joey have? He has the TRD front I'm pretty sure too.

[Zero]

I love the TRD search lip. And the JDM search lip looks really good.

Seriously, search.
:chuckles:



just wondering about the possibilities of fitting the trd lip to it
BTW, if you look closely, you'll notice that the TRD Mechanical front bumper already has the TRD Elegant lip on it.

[R I C H I E]

thats true

[Jintei]

I can get you a CF front splitter and stabilized rods for your TRD front. It can also be customized. PM me if interested.

http://i46.photobucket.com/albums/f109/Nimrodcelica/splitters/5.jpg

[celicarace]

What front lip from what car (Civic EK, EG, EP3, etc, Acura's, any make) would fit a stock '00 Celica front bumper?

If any, that is.

[silentchaos]

have tried 4 lips so far, 96-97 civic jun lip, 99-00 civic type r lip, celica 98 lip, skyline lip, dont want to have to doctor the lips to fit, well nt too much.

that's like trying to take apart you car with standard wrenches. you drive a Toyota not a HONDA! or NISSAN!

[Zero]

What front lip from what car (Civic EK, EG, EP3, etc, Acura's, any make) would fit a stock '00 Celica front bumper?

If any, that is.
The M2 lip for the Celica is the Mugen lip for the Integra/Prelude.

:AF:

[Kangaruu]

How does that lip look on the car? I've only been able to find pictures of the lip alone but not installed :(

[Soo__Fuego]

How does that lip look on the car? I've only been able to find pictures of the lip alone but not installed :(

fvcken noob search..................................
http://i527.photobucket.com/albums/cc359/soo__fuego/yellowjdm2.jpg






















j/k kangy, ur my dawg
here ya go
http://i527.photobucket.com/albums/cc359/soo__fuego/redmugenlip1.jpg

[celicarace]

The M2 lip for the Celica is the Mugen lip for the Integra/Prelude.

Really?

Yea, I've considered this lip. Probably will get it in the near future.

But. So I could just go to an aftermarket car shop (that sells body kits) & if they have it, purchase the Mugen front lip for the Prelude? <- Like I would ask them for this.

[Zero]

Really?

Yea, I've considered this lip. Probably will get it in the near future.

But. So I could just go to an aftermarket car shop (that sells body kits) & if they have it, purchase the Mugen front lip for the Prelude? <- Like I would ask them for this.
Not quite.

I think it was Speed N Stylez (the shop) that was making these lips - they're slightly modified for the Celica.

Search for the original thread about this lip.

:shrugs:

[Soo__Fuego]

Really?

Yea, I've considered this lip. Probably will get it in the near future.

But. So I could just go to an aftermarket car shop (that sells body kits) & if they have it, purchase the Mugen front lip for the Prelude? <- Like I would ask them for this.

http://www.raceonusa.com/index.asp?PageAction=VIEWPROD&ProdID=1042

[celicarace]

I think it was Speed N Stylez (the shop) that was making these lips - they're slightly modified for the Celica.

Ah, I see.

I could've figured that out bcus the Prelude's front is more squared than the Celica.

[Kangaruu]

Any pictures of that lip on a Celica and body colored?

I found another picture of the lip installed but the lip was black while the car was white :ugh:

[Soo__Fuego]

kang, ask chad very nicely if hell photoshop a pic for you:shrugs:

[Zero]

kang, ask chad very nicely if hell photoshop a pic for you:shrugs:
Pass.

:laugh:

Let him do a more extensive search first.


http://www.newcelica.org/photopost/data/500/DSCN3113.JPG
There, at least it matches.

Looks good with just the front lip and the stock rocker panels painted to match.


IMO, cut out the sections in the lip, it looks much better that way.
Or an even better idea would to have a shop fill in the indentions and make it one, smooth surfaced lip, similar to Celicajonz' Savage lip.

[Soo__Fuego]

Pass.

:laugh:

Let him do a more extensive search first.


http://www.newcelica.org/photopost/data/500/DSCN3113.JPG
There, at least it matches.

Looks good with just the front lip and the stock rocker panels painted to match.


IMO, cut out the sections in the lip, it looks much better that way.

:rofl:

[Soo__Fuego]

you know what it wouldnt lokk too bad with the openings filled in, jonzy here i come:chuckles:

[Zero]

you know what it wouldnt lokk too bad with the openings filled in, jonzy here i come:chuckles:
I got the idea from Hombredelassrtas/Dan. He confused Raph's Savage lip for that Mugen lip. :ugh:

[Soo__Fuego]

im sure raph was like "what mudafvcker!?":chuckles:

[Kangaruu]

DOODE I want that lip now.

What were you talking about with the cutting something out?

What material is needed to fill it in? I'd want to DIY before taking it to the professionals :ugh:

[Kangaruu]

Oh I know how to fill it in now :)

I'm going to try to get this lip now, heh.

[celicarace]

I'm going to try to get this lip now, heh.

Hey, get some good deal for me :P

[Kangaruu]

I'll let you know if I do end up getting it. :)