PDA

View Full Version : replacing factory speakers

goatgeo18
06-23-2002, 09:50 AM
Bought new speakers for my doors and back panels. need help on install. any pics would be helpful i took the door panel off and the screw holes dont match up to the new speakers.
Deftech
06-23-2002, 02:44 PM
Your speaker is probably larger than the factory. Most people have had to drill out the rivets for the factory frame and either manufacure something out of plywood or find a way to use the factory mounts. Same for the rears.
XYRCNCP
06-24-2002, 06:36 AM
get the speaker adapter from SCOSCHE, it is NOT a perfect fit but you can rig it....that's what I did.
sg89
06-24-2002, 11:25 PM
XYRCNCP do you have any pics?
goatgeo18
06-25-2002, 03:10 PM
got it taken care of thanks
J3adSeed
07-09-2002, 07:13 AM
screw the schoshe adapters. i bought 2 of em, spent 30 bucks, what a waste. they're plasic so they aren't very thick to resist vibration. use a piece of 3/4 mdf from home depot. it'll be like 4 dollars. cut that up and screw it in. i somehow lucked out and the screws i used fit the holes tight so i didn't have to use nuts. holds real well, doesn't vibrate, and i caulked the edges so its air tight.