Doughnut gaskets

[Celicasaur]

Anybody know where I can get these gaskets at a cheaper price than my local Toyota dealer? The all inc price seems to be the equivalent of $32-ish dollars. I need one to go from my PPE header to midpipe and then midpipe to axel back? (2.5" ID)

I've used exhaust sealant to cover up the PPE joint, but the axel back flange needs a proper gasket and while the car is off road over the winter, I'm hoping to get little things like this done the proper way.

Advice and links will be appreciated :)

[dead_star04]

autozone, i got mine for under 25 bucks. im not using it anymore, ill send it to ya if ya want it ( it doesnt fit on the obx exhaust)

[Celicasaur]

Interesting...yeah perhaps, how much will you want for it shipped (bear in mind I'm from London)

So, this gasket fits on the stock mid-pipe, but is too small for the obx exhaust, right?

[Celicasaur]

:wiggle:

[dead_star04]

obx doesnt use the axle back donut gasket, it uses a flat one instead. ill check on shipping bro

[bzizzi]

I just installed new cat and mid pipe,you can get them from Walker for around $12 ea.The Toyota donuts are a BIG RIP OFF !!!http://www.walkerexhaust.com



http://www.newcelica.org/photopost/data/500/Celica_Exhaust.gif

[Celicasaur]

bump

I need a doughnut gasket with a 2.5" I.D...

[Blue Bomber]

http://www.google.com/products?q=donut+gasket+2.5"&scoring=p

http://search.ebay.com/search/search.dll?sofocus=bs&sbrftog=1&from=R40&dfsp=32&satitle=%2B(donut,+ball+flange)+gasket+2.5&sacat=-1%26catref%3DC6&bs=Search&fmmk=&fmmd=&fylo=&fyhi=&mppfqy=%2B(donut,+ball+flange)+gasket+2.5&sargn=-1%26saslc%3D2&sadis=200&fpos=34473&sabfmts=1&saobfmts=insif&ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=32%26fsoo%3D2

[xero]

Get a v-band and be done with those sealing problems.

[xero]

http://store.summitracing.com/partdetail.asp?autofilter=1&part=EDL-6937&N=700+4294925237+4294921566+4294920576+4294787535+ 4294902078+115&autoview=sku
$14.95

http://store.summitracing.com/partdetail.asp?autofilter=1&part=DTE-9013&N=700+4294925237+4294921566+4294920576+4294787535+ 4294902078+115&autoview=sku
$6.99

[jlitman]

You can't use a donut gasket with the PPE flange... unless you had the stock header flanges welded on the end of the header and the midpipe, it won't work. They are recessed to accept the donut gasket, not flat like the PPE flange.

Cut off the flat flanges, weld on a V-band, done. Just ask around for someone who is a competent enough welder to do it without dropping the header.

[xero]

Get a v-band and be done with those sealing problems.

:AF: lol echo echo echo

[bman365]

How big is the ID of the stock pipe? When I put on my invidia exhaust it seemed smaller and wouldn't fit on the doughnut gasket very well..I had to use longer bolts to get it to work.