PDA

View Full Version : PA - 2000 GT-S part out; all offers welcome


David Hawkins
04-19-2009, 02:58 PM
Parting out a dark blue 2000 GT-S. None of the body panels survived without damage, so don't bother asking for any of those. All parts are located in Harrisburg, PA.

Full engine including alternator and uncut wiring harness, 6 speed transaxle still attached to engine and ECU.

This engine isn't perfect - the car was in a front end collision and there is some subsequent damage: The oil pressure switch at the filter is broken; The block bosses where the AC compressor mount are cracked (the compressor was still attached to the engine, so they do their job); One of the Lift solenoid sensors is broken; The intake manifold has some dents in it (you're going to want one of those mega power new manifolds anyway, right?). I've tried to price this appropriately. Car had ~110K miles on it and the front fuse block was broken so I was not able to run the engine to get compression numbers. I'm still going to try jumping the starter to get these, but I can't promise anything. - $1750 picked up. If I have to ship it, add $150 for the crate I will build for it.
http://www.hawkleyinc.com/2zz/1.JPG

Axles and front hubs - $75 each plus shipping.

Front calipers - $50 each plus shipping. I'll toss in the rotor for free - but you're paying shipping, and it's heavy.

Toyota VIP alarm system - brain, wiring harness and dash indicator - $75 plus shipping.

Leather seats - $200 (both fronts and the rears), pick only.

Front strut assemblies - $75/pair plus shipping

Floor mats (black/dark grey) - $30 plus shipping

Right rear tail lamp - $40 plus shipping

Any interior plastic piece - $10 each plus shipping

Glove box - $15 plus shipping

Multiplexing box and center fuse panel - $50 plus shipping


Need something else? let me know. I want to move this stuff, so don't be shy with offers.

TRlPPlN
04-19-2009, 03:09 PM
would you happen to have the rear calipers as well? if you do, let me know and ill get both front and rear calipers.

Gtsjeg04
04-19-2009, 03:13 PM
PMed ya

Ch33z
04-19-2009, 03:15 PM
how much for the left and right engine mount?

Chillworx
04-19-2009, 03:34 PM
pm'd

reddragon
04-19-2009, 04:18 PM
CAn you send me pics. of the front seat. I might intrested.

David Hawkins
04-19-2009, 04:31 PM
would you happen to have the rear calipers as well? if you do, let me know and ill get both front and rear calipers.

I have all 4, I just haven't removed both of the rears. $200 plus shipping for all 4.

David Hawkins
04-19-2009, 04:31 PM
how much for the left and right engine mount?
$50 shipped?

David Hawkins
04-19-2009, 04:32 PM
CAn you send me pics. of the front seat. I might intrested.
I'll get pics tomorrow.

reddragon
04-19-2009, 04:42 PM
I'll get pics tomorrow.

THANKS!

FlCeliChik
04-19-2009, 04:53 PM
Do you have the wires for the drivers side side marker? If you do how much shipped?

vietboy1606
04-19-2009, 04:54 PM
interested in the front leather seats too. Can u send me pix of the seats (front and rear) to vietboy1606@gmail.com? Thank you. I also need the 2 small pieces that hold the hatch cover down if u have those. And the climate control cover/face plate.

WakeRider
04-19-2009, 04:55 PM
I am interested in the black floor mats. Can you post some pictures for me =)

joefx13
04-19-2009, 04:56 PM
I just need the piece that the bulbs plug into for the sidemarkers (piece that twists onto the sidemarker housing). Also, OEM fogs.

David Hawkins
04-19-2009, 04:56 PM
Do you have the wires for the drivers side side marker? If you do how much shipped?
I don't know - the front end was gone when I got the car. A lot of of those wires are there, but I don't know what they go to.

David Hawkins
04-19-2009, 05:07 PM
Engine package sold!

vegeta4ss
04-19-2009, 06:10 PM
pm'd you about the alarm.

David Hawkins
04-20-2009, 11:41 AM
Alarm sold!

partyball
04-20-2009, 11:49 AM
Do you have the Wheel well plastics both driver and passenger side?

David Hawkins
04-20-2009, 12:05 PM
There were no body pieces forward of the doors that were worth saving.

https://evf.salvagedirect.com/php/galleryimage.php?item_id=234841&imagename=mvc-001.jpg

celilady00
04-20-2009, 01:07 PM
Do you have the ashtray plastic, the gear indicator plastic if yours is an auto, and the sun visors? Send pix please if you have these.

David Hawkins
04-20-2009, 01:09 PM
It was a 6 speed.

I've got the sun visors, no pics but I can get them when I have time. I've got the ashtray plastic, but it's pending sale.

reddragon
04-20-2009, 02:23 PM
How far are you from Staten Island, N.Y.?

David Hawkins
04-20-2009, 03:37 PM
How far are you from Staten Island, N.Y.?
Probably about 4 hours...maybe 5.

rickpalace
04-20-2009, 04:36 PM
how much for the door lock mechanism/actuator on the driver side?!!! i need this real bad fedup of using my key!

David Hawkins
04-20-2009, 04:55 PM
how much for the door lock mechanism/actuator on the driver side?!!! i need this real bad fedup of using my key!
I've had a couple of requests for this already. Couldn't get it out of the door today...I hate Torx screws.

uber_kraken
04-20-2009, 09:20 PM
pm sent

Rubito
04-21-2009, 02:06 AM
how much do you want for the small plastic parts that cover the mirror screws and the ones that cover the screw under the door handle all 4

icepik
04-21-2009, 02:22 AM
what about the middle console around the cd player??? or the part around the shifter if manual

WakeRider
04-21-2009, 06:19 AM
mats? Any pictures or prices for them? shipping to 02790

00toyogts
04-21-2009, 07:28 AM
how far are you from scranton, PA ? and is the hatch good?

rickpalace
04-21-2009, 07:32 AM
Quote:
Originally Posted by rickpalace
how much for the door lock mechanism/actuator on the driver side?!!! i need this real bad fedup of using my key!

I've had a couple of requests for this already. Couldn't get it out of the door today...I hate Torx screws.

i know what you mean! well let me know if you manage to get your hands on it!

lv_boy
04-21-2009, 07:47 AM
Also interested in pics of floor mats. I know Wakerider has asked for pics, just incase he doesnt want it, I might be interested. How much shipped to 61704?

joyner7679
04-21-2009, 08:06 AM
hey jay from jerzy do u have any pics of the leather seats? and are they still available please let me know if u want u can p.m. me thanks

David Hawkins
04-21-2009, 11:06 AM
$20 shipped for all 4?

David Hawkins
04-21-2009, 11:07 AM
^^ That was in response to Rubito.

David Hawkins
04-21-2009, 11:40 AM
what about the middle console around the cd player??? or the part around the shifter if manual
I have both pieces. They have a silver 'carbon fiber' overlay on them, though.

If you want pics, email me at dhawkins@twosrus.com - this applies to anyone who wants pictures.

David Hawkins
04-21-2009, 11:41 AM
how far are you from scranton, PA ? and is the hatch good?
I'm about 2.5 hours from Scraton IIRC. The hatch was damaged on the driver's side where the spoiler attaches.

David Hawkins
04-21-2009, 11:42 AM
hey jay from jerzy do u have any pics of the leather seats? and are they still available please let me know if u want u can p.m. me thanks
Seats are still available. For pics, email me - dhawkins@twosrus.com

David Hawkins
04-21-2009, 12:01 PM
The only things sold so far are the engine/ECU/Tranny, Alarm and sunroof panels. Everything else is still up for grabs.

Shoot me some offers if you think I'm asking too much - I need to move this stuff!

Other items off of the car and ready to go (shipped prices are for US addresses):

Instrument cluster - $75 shipped
Climate control head - $25 shipped
LoJack transmitter with antenna - $15 shipped
Window switch - $45 shipped
console - $50 shipped
visors - $30 shipped
rear calipers - $100/pair shipped
jack - $40 shipped

vindiCAtor
04-21-2009, 12:02 PM
1) black plastic trim piece that connects to the dash and surrounds the gauge cluster 2) A/C face plate/panel piece with knobs and sliders

Pics to Bombadillll@aol.com if you have them. Thanks.

bhb343
04-21-2009, 12:12 PM
How much for all the parts needed for a rear disk brake conversion? Calipers, disks, hubs, lines, parking brake cable, backing plate, etc. (Everything from the knuckle forward on the brakes plus the ebrake cable) Would need them shipped to 65401. Thanks

EMSRacerCeli03
04-21-2009, 12:24 PM
pmed ya

David Hawkins
04-21-2009, 12:40 PM
1) black plastic trim piece that connects to the dash and surrounds the gauge cluster 2) A/C face plate/panel piece with knobs and sliders

Pics to Bombadillll@aol.com if you have them. Thanks.
I've got the surround piece. Does the AC panel come out of the big center panel that has the clock/cubby/radio in it?

David Hawkins
04-21-2009, 12:42 PM
How much for all the parts needed for a rear disk brake conversion? Calipers, disks, hubs, lines, parking brake cable, backing plate, etc. (Everything from the knuckle forward on the brakes plus the ebrake cable) Would need them shipped to 65401. Thanks
I'd have to get most of that off of the car still - all I've got removed so far are the calipers and rotors. Do you only need the rubber lines? The metal hard lines may be a bit of a pain to package and ship.

$175 plus shipping for everything sound fair?

vindiCAtor
04-21-2009, 01:31 PM
I've got the surround piece. Does the AC panel come out of the big center panel that has the clock/cubby/radio in it?

Do you have any pics so I can judge the condition of these items? And yes, the A/C plate is separate from the upper part of the center console. Once the entire thing has been removed, turn it over and you'll see a couple screws holding the A/C plate to the upper center console.

David Hawkins
04-21-2009, 01:40 PM
Do you have any pics so I can judge the condition of these items? And yes, the A/C plate is separate from the upper part of the center console. Once the entire thing has been removed, turn it over and you'll see a couple screws holding the A/C plate to the upper center console.
pics sent.

Ghost Dragon
04-21-2009, 10:22 PM
Bump... for a good seller.

GinaNicolina
04-22-2009, 08:14 AM
How'd the front end undercarriage plastics hold up? Also the wheel well plastics. Question though: do these parts for the 2000 fit the 2003? I know the bumper is different so I'm not sure...

David Hawkins
04-22-2009, 08:39 AM
How'd the front end undercarriage plastics hold up? Also the wheel well plastics. Question though: do these parts for the 2000 fit the 2003? I know the bumper is different so I'm not sure...
No front end plastics or sheet metal were worth salvaging.

vindiCAtor
04-22-2009, 11:02 AM
pics sent.

e-mail replied.

David Hawkins
04-23-2009, 07:02 AM
I've got a lot of people asking for parts and pictures but hardly anyone ponying up cash for the sale.

Everything but engine package, rear disk package (pending), shift boot, hatch struts and sunroof sliders is still available. Toss me some offers on this stuff or I'm going to have to start trashing it. I need space.

4 people have been 'very serious' about the mats - one guy was even going to drive over and get them - but I've still got them. Come on!

WakeRider
04-23-2009, 07:34 AM
I am gona pass. Looking for something in better condition of mats.

David Hawkins
04-23-2009, 09:17 AM
Rear brakes/hubs/e-brake cables sold.

The mats aren't new, so that's understandable. If anyone doesn't have mats or has really bad ones, these would be worthwhile. $20 plus shipping for the set of 4?

David Hawkins
04-24-2009, 04:27 PM
Instrument surround, HVAC head, shift boot and hatch struts sold.

Mido
04-25-2009, 10:47 PM
i don't know what parts you still have, but im looking for these:

I want a few parts from you.

Window controls switch
Mirror adjusting switch ( if you have it, didn't see a pic of it )
passenger side engine cover
ALL under engine plastic covers.
GTS Cluster ( how many miles )
Valve Cover ( gts )
Rear window blade? ( black metal peice that holds the wiper ) and the motor.
This small plastic peice that sits right behind the mirror ( in the interior )
ashtray?

David Hawkins
04-26-2009, 06:39 AM
i don't know what parts you still have, but im looking for these:

I want a few parts from you.

Window controls switch
Mirror adjusting switch ( if you have it, didn't see a pic of it )
passenger side engine cover
ALL under engine plastic covers.
GTS Cluster ( how many miles )
Valve Cover ( gts )
Rear window blade? ( black metal peice that holds the wiper ) and the motor.
This small plastic peice that sits right behind the mirror ( in the interior )
ashtray?
I should have all of these except for the valve cover and engine plastics.

Mido
04-26-2009, 09:13 AM
sounds good, pm me the prices for each please.

Mido
04-26-2009, 11:09 AM
how many miles is on the cluster? pm me about all the ^ that i want

Gtsjeg04
04-26-2009, 11:15 AM
This seller is awesome. He got me the engine and transmission really quick and on the cheap. Will buy from again if given the chance.

David Hawkins
04-26-2009, 11:17 AM
This seller is awesome. He got me the engine and transmission really quick and on the cheap. Will buy from again if given the chance.
Wow- that was some fast freight shipping! I assume my crate did the job?

David Hawkins
04-26-2009, 12:50 PM
No one wants seats? Come pick them up for $100 - all 4!

Chillworx
04-26-2009, 01:31 PM
pm'd

Mido
04-29-2009, 07:08 PM
david please pm me again with the parts i need including the plastic \ rubber weather strip between the door panel and the window on the driver's side and all the other stuff.

appretiate it.

stb94tsi
04-29-2009, 10:50 PM
need:
2 piece black plastic steering column shroud
removable rear plastics to access tail-light bulbs
the control unit for heat/AC....
shoot me a price..

Antithesis
04-30-2009, 03:18 AM
Is the "glove box" for sale the one in front of the passenger seat... or the one in the center console above the air conditioning gauges?

David Hawkins
04-30-2009, 05:10 AM
need:
2 piece black plastic steering column shroud
removable rear plastics to access tail-light bulbs
the control unit for heat/AC....
shoot me a price..
I've got the column plastics and I should have the tail lamp plastics. I do not have the HVAC head anymore - $35 shipped for the plastics.

Antithesis - the glove box is the one in front of the passenger seat. I have the one above the radio also if you need that.

EVERYONE - the car has been cut up and sent for scrap, but I have just about everything out of it. This stuff takes up a LOT of space when it's not in a car anymore, so shoot me some offers and help me move this stuff!

gndude
04-30-2009, 06:02 AM
I've got the column plastics and I should have the tail lamp plastics. I do not have the HVAC head anymore - $35 shipped for the plastics.

Antithesis - the glove box is the one in front of the passenger seat. I have the one above the radio also if you need that.

EVERYONE - the car has been cut up and sent for scrap, but I have just about everything out of it. This stuff takes up a LOT of space when it's not in a car anymore, so shoot me some offers and help me move this stuff!


Do you still have the jack & lockdown bolt? What about the particle board cover for the spare tire? Would you take $40 for the above?

Thx.

David Hawkins
04-30-2009, 06:50 AM
Do you still have the jack & lockdown bolt? What about the particle board cover for the spare tire? Would you take $40 for the above?

Thx.
The lockdown bolt? If that's the one that holds the spare in place, it was broken. I've got the particle board cover (have to check condition) and the jack - I'll take $40 plus shipping for those two.

00toyogts
04-30-2009, 08:00 AM
can you send me pics of the hatch please

David Hawkins
04-30-2009, 08:56 AM
can you send me pics of the hatch please
The hatch is damaged by the Toyota emblem on the LH side. The spoiler is damaged there also - the car rolled and it looks like that part of the spoiler was one of the points of contact. I doubt the hatch is worth trying to salvage.

stb94tsi
04-30-2009, 10:18 AM
i don't need the HVAC cover plate, i need the unit or actually just the circuit board inside the unit.and i forgot I need the plastic cover the ECM...

David Hawkins
04-30-2009, 10:31 AM
i don't need the HVAC cover plate, i need the unit or actually just the circuit board inside the unit.and i forgot I need the plastic cover the ECM...
Don't have either of these.

stb94tsi
04-30-2009, 10:55 AM
check this link, i'm looking for the two piece board for this mod...
http://www.newcelica.org/forums/showthread.php?t=288963

David Hawkins
04-30-2009, 10:58 AM
I don't know how many different ways I need to say this, but I do not have the HVAC head anymore!

stb94tsi
04-30-2009, 11:33 AM
sorry just making sure, this is a very hard piece to get and i have bought two and the people have just sent me the cover and white front switch plate, so I'm trying to very clear... what you'r pay-pal so i can shoot the money for the parts.....
thanks...

David Hawkins
04-30-2009, 11:42 AM
sorry just making sure, this is a very hard piece to get and i have bought two and the people have just sent me the cover and white front switch plate, so I'm trying to very clear... what you'r pay-pal so i can shoot the money for the parts.....
thanks...
paypal@clubmr2.com

The guy who wanted the fascia on the HVAC got the entire head. He may be willing to sell the unit, but that's up to him to speak up.

Da1Duc
04-30-2009, 05:57 PM
You have PM

stb94tsi
04-30-2009, 07:27 PM
paypal@clubmr2.com

The guy who wanted the fascia on the HVAC got the entire head. He may be willing to sell the unit, but that's up to him to speak up.

cool, thankss for letting me know that, i shoot you the cash..

ygpm......

Antithesis
05-01-2009, 12:05 AM
Antithesis - the glove box is the one in front of the passenger seat. I have the one above the radio also if you need that.

Yeah I'm looking to pick that up. Is the whole thing one solid console, or does the cubbyhole part come out individually? I'm looking to custom fabricate some stuff to fit in mine, but I've yet to really take it apart. Thanks.

David Hawkins
05-01-2009, 04:46 PM
I think I'm going to take the rest of the parts to ebay. I've spent too much time tracking items down, taking pictures, emailing the pictures and then having people flake on me. At this point, I'm just trying to move stuff at cheap prices and some folks just want too much effort for a good deal.

stb94tsi
05-01-2009, 06:58 PM
thanks for the offer but i got the parts locally...

sliksta1
05-02-2009, 09:28 AM
im in need the front subframe with steering/suspension included. is this something you can do? i know shipping is going to be alot. can you give me a price if your willing to sell it?

darren

David Hawkins
05-02-2009, 04:15 PM
im in need the front subframe with steering/suspension included. is this something you can do? i know shipping is going to be alot. can you give me a price if your willing to sell it?

darren
I've got it - where would it need to be shipped?

WakeRider
05-02-2009, 05:39 PM
hey man. Would you be willing to get me some screws, clips and nuts. Can you let me know if your willing to help me out. Will give you a bit of cash =)

David Hawkins
05-03-2009, 12:35 PM
hey man. Would you be willing to get me some screws, clips and nuts. Can you let me know if your willing to help me out. Will give you a bit of cash =)
I doubt I'd be of much help since the body is gone...

Smallz
05-06-2009, 01:36 PM
what up i need subframe radiator plus suport and both side pannels..... do you got????? and how much im tryin to fix up my ride....

yodaddyguido
05-06-2009, 01:48 PM
omg on the seats... lol im gonna have to mapquest where you're as since im in ohio. its completely up to you whether youd like to send pics or not, but my MAIN focus on this thread is: did the other guy ever pony up for the engine mounts? i need the passenger (right) side engine mount for sure, money in hand and ready to pay if it survived. as for the seats, geez, if these are in great shape, i may take the drive! thanks for any info, i may pm you anyways before you read this.

David Hawkins
05-06-2009, 02:11 PM
Front seat pics are in the CL ad - http://harrisburg.craigslist.org/pts/1153402288.html

The motor mounts were either destroyed in the accident or shipped with the drivetrain.

Radiator was ripped off in accident.

vtand06
05-19-2009, 08:36 PM
you still got the driver side, side view mirror? couldn't really tell if it was still good from the pic

David Hawkins
05-20-2009, 07:40 AM
you still got the driver side, side view mirror? couldn't really tell if it was still good from the pic
Still have both outside mirrors - the RH mirror has a scuff on it, but the LH mirror is in good shape.

IPD84
05-20-2009, 10:11 AM
late and I never heard a mention on this but do you have the GTS pedal covers and foot rest? What about the steering wheel?

IPD84
05-20-2009, 10:12 AM
or the Climate control knobs and pull switch tabs? Just the clip on pieces that can be pulled out. In gray

David Hawkins
05-21-2009, 08:48 AM
sorry just making sure, this is a very hard piece to get and i have bought two and the people have just sent me the cover and white front switch plate, so I'm trying to very clear... what you'r pay-pal so i can shoot the money for the parts.....
thanks...
I got the HVAC head back because one of the tabs on the grey cover had been glued back on. If anyone needs the head itself (with the circuit board) or the knobs/slider, shoot me some offers.

gndude
05-21-2009, 10:26 AM
Looking for the battery hold down bracket and the long bolts/etc. that do down the side. Do you have those?