PDA

View Full Version : some questions about quater mile


Carmageddont231
06-04-2009, 11:41 PM
What time approximately will be at jap celi t231 with mech transmission
spec:
-stock engine with the depressed compression ratio under 9
-c2 turbokit on gt2860rs with max boost
-factory lsd torsen.

so I understand it something nearby 320hp on wheels (by the way and how many to the torque?).
road covering an average, clue is not present.
I have some variants of wheels. With what it will be better?
1.kumho cesta 215/45/17 + sparco 17/7j
2.dunlop direzza 215/45/17 + rays gramm lights 17/7.5
3.bridgestone potenza re555 235/40/17 + rays gramm lights 17/7.5

what time may i run on the quater mile and in what configuration?
now in stock by gtech with kumho cesta 215/45/17 + sparco 17/7j it's near 16 secs ;-(
thanks

bt216
06-05-2009, 08:53 AM
mid-low 13's is my guess. That's all we could do with this information.

lVlemphizStylez
06-05-2009, 09:34 AM
320 whp celica will trap north of 115-116 given it can use that power in the rev range. Expect mid to low 12s if you can hook, and torque should be around 240-260ish

bt216
06-05-2009, 12:13 PM
^If he has slicks, I agree.

Carmageddont231
06-05-2009, 03:36 PM
sorry, my english too bad for understand you
what you mean in digits 115-116
i may run low 12secs if i what?

320 whp celica will trap north of 115-116 given it can use that power in the rev range. Expect mid to low 12s if you can hook, and torque should be around 240-260ish

evilthorne
06-05-2009, 05:30 PM
115-116 miles per hour.

12 seconds if you have a great launch and are able to not have much tire spin and shift properly.

Illusive
06-08-2009, 05:01 PM
if you have never drag raced before, then expect poor times until you get a lot of practice under your belt.

by poor I mean varying time's from 13's to 14's. even a horrible run should net you at least 14 something with that power level.

as others have said, depending on how well you launch the car at the starting line will determine your 1/4 mile time. since you dont have drag radials or slicks, it will be difficult for you to get a good 60' time.