Ordering Carpet

[xCraZyEddiEx]

after doing some research i found a website that sells auto carpet at a pretty decent price, 14.95 a yard to be exact!!! :AF: well, long story short i ordered 3 yards of it and i will let you guys know how it turns out. The carpet (called superflex carpet) is 100% Polypropylene Pile Carpet with no rubber backing but is supposed to be stronger than oem. (note it comes 80 inches wide)

btw, the website is yourautotrim.com

and after looking for a online coupon code i found one for 15% off

so with ground shipping the whole carpet will cost 52 bucks, better than toyota's price of 300+

there is a luxury style carpet available as well but i wanted something stock looking and will lay better. :wiggle:

[Swindler54]

Nice find

I'm interested in how it will turn out

[xCraZyEddiEx]

thanks. this should also give me a good opportunity to lay some dynomat as well.

[Mido]

i'm also very interested on how it turns out, i need to change my carpet, it's really ugly, lol

[jonnyess]

after doing some research i found a website that sells auto carpet at a pretty decent price, 14.95 a yard to be exact!!! :AF: well, long story short i ordered 3 yards of it and i will let you guys know how it turns out. The carpet (called superflex carpet) is 100% Polypropylene Pile Carpet with no rubber backing but is supposed to be stronger than oem. (note it comes 80 inches wide)

btw, the website is yourautotrim.com

and after looking for a online coupon code i found one for 15% off

so with ground shipping the whole carpet will cost 52 bucks, better than toyota's price of 300+

there is a luxury style carpet available as well but i wanted something stock looking and will lay better. :wiggle:

wait...so you're buying a plain piece of unmoulded carpet and are going to cut it to Celica specs how exactly...?

[vegeta4ss]

wait...so you're buying a plain piece of unmoulded carpet and are going to cut it to Celica specs how exactly...?

x2

[Mido]

maybe he's going to put his old carpet over the new 1 he ordered, and cut it from there to make it the same exact shape.

[xCraZyEddiEx]

^ exact-0. also i heard that if you get a soldering iron you can clean up the edges by melting them so bolts or whatever wont be a problem later on. yes the plan is to trace the old carpet.

[Bitter]

i want to scrap the OE carpet for what comes on the MR-2 floors. :lol:

[jonnyess]

^ exact-0. also i heard that if you get a soldering iron you can clean up the edges by melting them so bolts or whatever wont be a problem later on. yes the plan is to trace the old carpet.

Wow - this is now a major project...good luck with that.

I considered every alternative when recently replacing my carpet, but finally decided that the value of my time dictated that I just buy OEM ($400) and have it installed professionally ($75). Voila!

[bman365]

Not sure how well it will conform to all the shapes. You will most likely have alot of wrinkles/folds unless you cut the carpet at every little corner.

[xCraZyEddiEx]

guys i understand the cynical comments but trying something different and DIY is what this website is all about, right? :D

[xCraZyEddiEx]

To all the cynics,
does this look molded or contoured? apology to lowred for using pic for example but...

http://www.newcelica.org/forums/showthread.php?t=301067&referrerid=21727 :nono:

[xCraZyEddiEx]

guess what came in today.:wiggle:

[Bitter]

To all the cynics,
does this look molded or contoured? apology to lowred for using pic for example but...

http://www.newcelica.org/forums/showthread.php?t=301067&referrerid=21727 :nono:
yes, that is molded. its heat pressed in a mold to form it into the shape of the car.

[xCraZyEddiEx]

http://img41.imageshack.us/img41/7043/cimg0446s.jpg

[Bitter]

cool, good luck. i'm planning to (before winter) yank my carpet and have the flooring from a honda element installed in its place. **** salt!