Finally!

[CRBCelica]

Alright well its time to drop but i have one more question, is this all i need for the skunk2 coilovers and the agx?

http://cgi.ebay.com/ebaymotors/SKUNK2-RACING-COILOVER-SLEEVE-KIT-TOYOTA-CELICA-00-04_W0QQcmdZViewItemQQhashZitem35a12ed96fQQitemZ230 337468783QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAcces sories

http://cgi.ebay.com/ebaymotors/KYB-4-AGX-STRUTS-SHOCKS-TOYOTA-CELICA-00-01-02-to-05_W0QQcmdZViewItemQQhashZitem1c0ebee6d1QQitemZ120 506476241QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAcces sories

[Colours]

here is a link from one of are sponsors for the AGX shocks, Very good deal.

http://www.titanmotorsports.com/kybagxsupa.html

Other then that that is all u will need but, I would suggest putting in new camber bolts.

[CRBCelica]

^camber bolts? (sorry noob)

oh and is it $390 for the complete set? 2front 2 rear?

[edg3h_91]

what camber bolts?

[Colours]

http://www.jscspeed.com/celica/suspension/eibach_camber_bolts.htm

Here is a link, they will make it so that the shop is able to adjust the toe and camber on the back tires. I have just ordered these also, as with many cars like ares they will seize and not allow the toe and camber to be adjusted.

[CRBCelica]

more info on camber?

[Colours]

it is optional, yes

[SmutasticGT]

Nice! Car will look clean with some coilovers, esp since your wingless too :eek:

[03gtsblades]

really you just need the camber bolt for the front. the rear is okay. and that just lets you fix ur camber

[CRBCelica]

Nice! Car will look clean with some coilovers, esp since your wingless too :eek:

thanks bro :gap:

[TRD00CelicaGT]

The bolts are not needed but they arent a bad idea if u live in a Northern states thats gets snow on a regular basis. and to answer ur original question, YES that is all u need to lower ur car. just dont forget to get an alignment other wise ur tire are going to wear out within a few months.

[Soo__Fuego]

the camber thing has been covered many times so its weird how much bad info is being given, the celicas Mac struts up front by (bad) design dont camber when dropped or compressed so even if u put the celica on the floor you wont get negative camber up front so no need for camber bolts there unless you want to add some negative camber for handling or show ............ the rear will camber but toyota added an adjustable bolt back there, so after you set the height get an aligment and use the oem rear camber bolt, if your gonna slam the rear id suggest having them set the toe to as close to 0 as possible, if that set up shows some camber wear then order a rear camber kit

[Sloalty]

shop told me couldnt adjust camber with the factory bolts in the rear..i had to get camber links to adjust...

[Soo__Fuego]

shop told me couldnt adjust camber with the factory bolts in the rear..i had to get camber links to adjust...
theres a sucker born every day :shrugs:


do yourself a favor and go to the INSTALLS section at the top of the nc.org page and look for the oem rear camber bolt how-to under the suspension section ........ uh oh lol