PDA

View Full Version : For sale: Jin's 2zz IM for 1zz motor


jin602_05
07-28-2010, 09:27 AM
Finally I am going to part away from my 2zz IM project.

Reason for selling is that I need to buy a new bumper and get it painted.

For Sale: 2zz intake Manifold for the 1zz motor.
** tuning does not require, but you could push the most out of it with a good tuning. Sorry no dyno, only butt dyno which I could feel a gain on the higher RPM.
I stated awhile back I tested it out with 2 other Celica GT, which I won both those race.

The 2zz IM for 1zz motor include

2zz Intake Manifold
2zz Throttle Body
2zz TPS sensor


What you will need to get>
*1zz IAC or 2zz IAC ** I can NOT confirm if the 2zz IAC will work, but if you could get that working with the Manifold it would be best because of the two pipe routed in a different angle. 1zz IAC will require to cut the pipe off a bit smaller to fit in the coolant hose.
*2zz Throttle Cable ( it

jin602_05
07-28-2010, 09:28 AM
Price: 200 + shipping

jin602_05
07-28-2010, 09:34 AM
I will post picture if I get enough interest.

jr_castillo847
07-28-2010, 10:05 AM
GL with the sale bud

fathorsejr
07-28-2010, 10:17 AM
looks clean!!!

freshrican11
07-28-2010, 11:29 AM
I really would by this if you had a dbw throttle body lol. this sucks for me. good luck though

jin602_05
07-28-2010, 12:51 PM
Bump

freshrican11
07-28-2010, 02:19 PM
you got PM!!!

jin602_05
07-29-2010, 07:17 AM
Good Morning Bump!

jin602_05
07-29-2010, 07:17 AM
Good Morning Bump!

BlueCrush
07-29-2010, 08:35 AM
Ygpm

jin602_05
07-29-2010, 10:49 AM
Bump

I need this to be sold asap. Need a new bumper!

Money talks! 220 shipped. first come first serve.

PM with ALL ur question. I will do my very best to answer it.


I don’t know if this would work for DBW (Drive by wire). Corolla and Matrix owner please do further research about DBW. I don’t what you to purchase this and be upset if this doesn’t work out for you.

jin602_05
07-29-2010, 10:49 AM
EDIT I don’t WANT you to purchase this and be upset if this doesn’t work out for you

sluRpeeGT
07-29-2010, 02:06 PM
Not interested, I would have been if I didnt do a 2zz swap.
But anyway, maybe it will help sell if it shows a preformance gain? Maybe you can get it dynoed before you completely remove it. That way a tasteful mod on a gt will actually show its purpose? Or was this just built for looks and no actual preformance gain?

Free bump for you. I think you were, and are the, only person to have done this mod. A+ for creativity on your part. Should sell quick.

jin602_05
07-29-2010, 02:13 PM
That way a tasteful mod on a gt will actually show its purpose? Or was this just built for looks and no actual preformance gain?

It's for a Preformance gain, and NO I have not able to get it to the Dyno.

I don't think I would put all my effort into his mod just for LOOKS.

Any Manual 5 speed Celica will have a more benefit to this mod then me. My car is auto so everytime it shifts, it just drop too low on RPM.

edg3h_91
07-29-2010, 02:15 PM
where can i locate the other things i need to bolt this up?

pmed u also :D

jin602_05
07-29-2010, 02:40 PM
Currently the IM is pending... waiting for a payment.

jin602_05
07-30-2010, 06:48 AM
bump

jin602_05
07-30-2010, 11:21 AM
Bump: Back on sale until further notice.


PM all question concerning the 2zz IM.

jin602_05
07-30-2010, 11:28 AM
I am looking for a Bumper for Jintel (used) Kami front bumper, or Authentic. I rather not deal with any other maker of this kind of bumper.

If you have this and willing to do a striaght trade. please PM me. thanks.

NOT interested in any other trade.

jin602_05
08-01-2010, 03:33 PM
Sold

Pool Playen Bob
08-01-2010, 03:42 PM
about time.

Boosted Yotaman
08-01-2010, 04:13 PM
****! I just noticed this thread and was gonna PM you bc I want/need this with my turbo build!! Well congrats on the sale. I hope someone else sells there **** so I can get dibs on it! lol