Veilside Owners

[Cabel]

Just wondering what you did for the under engine plastics since it doesn't reach the front bumper. Did you just remove the one front piece in the front and leave it open? Or did you build something to cover? Wondering what you used and suggestions to do such?

Also does your kit flex around the exhaust cutout at highway speed? Did you attach that corner to spare tire well or something??

All suggestion appreciated. I take some pics to explain better but I'd need a lift, hehe.

[h0l0grafik]

hey ur kit is knock-off what do u expect, of course its gunna have problems... i've seen the veilside kit at like 100mph... nothing wrong at all, body shop supposed to take care of ur engine well plastics...

[Cabel]

Hey I'm not complaining about it at all, I'm just wondering what others may have done to reinforce it. Knock off or real I don't expect it to be as durable as the urethane bumpers.

[TRD-GT]

xzast:**** up ass....whats and asshole.....

Cabel:i will post some pics of what i did...and probably every veilside owner has...since the real one doesnt have nothing to solve the front thing...u just have to be inventive....

on the back thing...i havent had any problems whatsoever....but when i installed mine i did noticed that the oem bumper was attached to the car chassis...on the lower part...so i came out with something to just in case....i will post the up tomorrow morning

[Cabel]

Thanks man very mucho. Did I say thanks for the scoopyet too? It looks bitchin really completes the look.

[nccelica]

with my kit i added fiberglass to the front to extend it some, you could try that or you could tie strap the plastics to the frame or something like that :)

xzast - blitz urethane jdm front... never heard of the jdm in urethane, whered you get it?

[selika2000]

I'm removing mine. I've had problems with them way back when I had my car stock.. so it's time to lay those things to rest. :chuckles:

[eccentricGTSdvr]

CABEL good job man thanks for posting this i need this info when i get my VEILSIDE kit in next month. the kit so much 2400 for the whole thing and then i have to get it painted too.

BETO man i would like to see the pix of your car and what you did to plastics.

[SEASIDE-GRAPHIX]

thats like what i did for the front because i didnt have it straped enough and ours fell under the car and broke 2 neon tubes in the front...
and the back make 2 straps and screw them in under the car where ever you can watch your gas tank.

[TRD-GT]

selika2000:i did what u once told me , u remeber the pics u sended me...

i went today to find out about ur kit.....i pmd u

[selika2000]

Originally posted by TRD-GT
selika2000:i did what u once told me , u remeber the pics u sended me...

i went today to find out about ur kit.....i pmd u

Thanks Beto!!

Your a big guy.. so just throw in the attitude with those guys.. and you'll scare them out of their skin. ;)