does rota rims fit our car?

[evocelica]

does rota attacks and battles fit on our vehicle?
are our hubs size smaller then 56.1???

[enchie2]

I was looking at those rims. They look really good( i think) on a celica. But the offset on those is +48mm, and also 7.5" width. So would need to get get some 5mm wheelspacers just to make them fit. If you get spacers wider than 5mm, then you would probably need to change the lugs too. I hope that helps

[bickley]

Where can you get spacers from? I was looking at the Rota Subzeros and they are a 45 offset. At 17x7.5 do you think they will fit?

[enchie2]

i think the subzeros would have an offset of +48mm. The 45 offset is i think for 5x114 or 4x100, not really aure on this. As for the spacers, you can get them at your local pep boys for around $7 each. But if you want really good ones, get the h&R spacers, but those are out of stock the last time i checked.

[boxologist]

Rotas are made for Subarus, u can find other manufaturers who have offsets for Toyota.

[autxr]

Originally posted by boxologist
Rotas are made for Subarus, u can find other manufaturers who have offsets for Toyota.

Interesting, I've seen them on Celicas...

They make a 15x6.5 inch wheel with 40mm offset and 5x100 bolt pattern. It fits pretty well on the Celica, and is a good wheel for autocrossing.

It does have clearance issues with the front calipers on a GT though (not sure about the fittament on the GTS), requiring thin spacers.

Scott

[bickley]

Originally posted by boxologist
Rotas are made for Subarus, u can find other manufaturers who have offsets for Toyota.

Well can someone point me to a manufacturer who can make something light, in white, in 17x7.5 or 8, and make them afforadable?

Thanks,

Fred