TurboKits.com NEW Billet T28 Turbo Kit - GroupBuy!

[TurboKits.com]

Hey Guys,

This group buy will end 09/16/11. Tell everyone!

As always, feel free to PM, e-mail, or call with questions. We are very happy to help!

http://img525.imageshack.us/img525/4923/tkcelicagtsturbokit.jpg

TurboKits.com Turbo Kits Include:
- Custom Spec'd Billet T28 Turbocharger
- High SILMoly Ductile Iron Cast Tubular Manifold
- 3" Stainless Steel Mandrel Bent Downpipe
- 3" Stainless Steel Straight Pipe w/ High Flow CAT (Celica Only)
- 3" Stainless Steel Exhaust Pipe (Celica Only)
- 2"-2.5" Lightweight Polished Aluminum Intercooler Piping
- 6.25"x18"x3.5" Front Mount IC
- Forge Silver Billet BOV
- (4) 440cc or 550cc Injectors (Factory Clip Drop In!)
- AEM FIC Fuel Injector Controller*
- AEM FIC Wire In Harness
- Stainless Braided Oil/Water Feed Lines
- Stainless Braided Oil/Water Return Lines
- Black Silicone Intercooler Couplers
- Stainless T-Bolt Clamps
- All Hardware & Fittings for Install
- Step-by-Step Install Instructions
* includes base map

Call (860-676-2929), E-mail (sales@turbo-kits.com), or PM to reserve your spot now...

[TurboKits.com]

Bump - We have group buys going on a Honda & Kia forums, you going to let those guys beat the Celi crowd?

[hulkster]

so tempting:drool:

[h8eternal]

if power fc is optional how much extra would that be?
do it scott do it!!!!!!!!!

[Avegedme]

Oh man....

[hulkster]

do it scott do it!!!!!!!!!

im def thinking about it.gonna wait and see if any other takers. how about you?

[brownbomber1988]

How much depo?

[sdsu_celica01]

Since the wife won't let me get a new car....I might just have to get this as long as my bonus comes through in this next week or two.

[ajh1717]

Since the wife won't let me...

Dam ball and chains.

Also, how is the med school pursuit going?

[sdsu_celica01]

Dam ball and chains.

Also, how is the med school pursuit going?

Not to get too OT but we did just buy a Tundra 4x4 5.7L:gap: and for now med school will wait a little bit. I am finished and licensed as a Nurse Practitioner in both CA and AZ, and will be working with a Pulmonary/ICU group in AZ for now.

[TurboKits.com]

Yes sir, the PFC which includes the PFC, FC Datalogit & 550 or 700cc Injectors is $895 additional.

if power fc is optional how much extra would that be?
do it scott do it!!!!!!!!!


Once we get to (5) we'll start taking $500 deposit to lock down the price and then go from there.

How much depo?


Do it, Do it.

so tempting:drool:

Oh man....

im def thinking about it.gonna wait and see if any other takers. how about you?

Since the wife won't let me get a new car....I might just have to get this as long as my bonus comes through in this next week or two.

[brownbomber1988]

2795 no tax no shipping?

when does the whole balanced have to be paid?

[mixaska]

I want to buy turbo-kit for my GT! (but i leave in Russia, it possible no shipping?)

[itz_Ciel]

Im in. Cmon guys!!! I wanna get free shipping!! Lol

[Robo56]

2795 no tax no shipping?

when does the whole balanced have to be paid?

I would also like to know this.

[brownbomber1988]

?????.

[TurboKits.com]

Sorry for the late reply guys. I was out of the country and the Hurricane held up my return!

No TAX unless you live in CT, FREE Shipping if we get the signups, so yes :)

If you wanted to hold the price with a deposit, we would need the full payment within a few weeks of the groupbuy ending so we can ship them all at once, since the reason we can offer the lower price is on the quantity of building & packing everything at once.

2795 no tax no shipping?

when does the whole balanced have to be paid?

I would also like to know this.

?????.


Hey mixaska, we would have to charge shipping to Russia, it would be in the $350 - $450 range. We could credit back ground shipping towards your shipping cost if we get the signups :)

I want to buy turbo-kit for my GT! (but i leave in Russia, it possible no shipping?)


Added, thanks :)

Im in. Cmon guys!!! I wanna get free shipping!! Lol

[Erik M]

Damn this is the kit I'm saving up for! I will only have about $1500 by then. I was looking to buy the kit by my 21st birthday in October. Sad Sad day

[sdsu_celica01]

How long does packaging and shipping usually take from date of receiving payment in full?

[TurboKits.com]

Depending on your upgrades, BB Turbo, Plug n Play Harness, PFC Etc. If it is our standard out of the box kit, we have the components in stock and can ship in a few days after receiving payment :)

Thanks

How long does packaging and shipping usually take from date of receiving payment in full?

[brownbomber1988]

So still 2795 no goodies?

[brownbomber1988]

???

[RWCustoms]

i just saw say this thread today. Was considering this for my 1zz. Would this work on an Auto?

Turbo-kits ! You did my friends Kia Forte ! Runs like a beast now

[TurboKits.com]

Correct, we are at the $2795 level ($400 OFF normal price), sorry for the late reply, we had a few group buys going at the same time and have been processing orders and shipping like crazy these last few days :)

So still 2795 no goodies?


Yes, for sure, we have sold tons of these for the Auto, where are you located? Maybe you can bring the car up to us?

Oh cool about your friend with the Forte, glad the car is fast :)

i just saw say this thread today. Was considering this for my 1zz. Would this work on an Auto?

Turbo-kits ! You did my friends Kia Forte ! Runs like a beast now

[sdsu_celica01]

TK,

What do you guys suggest using to finish off the axle back portion of the exhaust to keep it free flowing and not restricting it with say the TRD exhaust?

[TurboKits.com]

Honestly, it's about 3 feet from where our kit terminates and your rear bumper. I'd take it to a muffler shop and have them put on a 3" w/ Magnaflow, Flowmaster, etc to suit your sound taste. The exhausts that are on the market are too small for what you will want. Also, if the kit is installed at our facility, we can build one as we install the kit.

Thanks, good question.

TK,

What do you guys suggest using to finish off the axle back portion of the exhaust to keep it free flowing and not restricting it with say the TRD exhaust?

[sdsu_celica01]

Thanks for the info! I wish you guys could do the install and tuning but I don't want to ship nor drive my car cross country :(

[TurboKits.com]

Ahhh, yeah, definitely a haul from AZ, the kit is fairly easy to install, so even if you can't have us do it, you can still have it done or do it yourself :)

Thanks for the info! I wish you guys could do the install and tuning but I don't want to ship nor drive my car cross country :(

[RWCustoms]

im in staten island. I could always take the trip to CT, but im still debating the kit and saving up $$ just in case i decide to do it

[sdsu_celica01]

Local shop here doesn't want to much to do it which I might just rather pay their fee than work on it when I have the time. Also can you pm me a price on clutch that is capable? Thanks

[TurboKits.com]

Ohhh, Staten Isl, you must be Sal's buddy. Great kid, his car turned our very nice, he got into Performance Auto and Sound Mag with it through our contacts, did you see it?

Yeah, just hit us up when you are ready :)

im in staten island. I could always take the trip to CT, but im still debating the kit and saving up $$ just in case i decide to do it

That stinks, it very important to find a good tuning shop. The tuning is the make or break of any turbo system. Do you plan on running 8 PSI stock motor? Or are you planning on building? Let me know and I can put you into the best clutch. Thanks

Local shop here doesn't want to much to do it which I might just rather pay their fee than work on it when I have the time. Also can you pm me a price on clutch that is capable? Thanks

[sdsu_celica01]

The shop here has a good reputation for building drag cars. They are going to do the install but I am going to try and set a date to have Church Automotive do the tuning in CA. I planned on keeping the boost at 8psi since from reading, research and talking to others seems to be best for stock internals. I do not plan on doing a huge build at this time.

[TurboKits.com]

Ahhh good, heard great things about Church Auto, good choice!

Ok, you'll want to go with a full disc clutch, medium clamp load so it still street-able. ACT HDSS is a great choice your looking around $400. Let me know, we can give you an even better deal if you dd it in with a kit :)

The shop here has a good reputation for building drag cars. They are going to do the install but I am going to try and set a date to have Church Automotive do the tuning in CA. I planned on keeping the boost at 8psi since from reading, research and talking to others seems to be best for stock internals. I do not plan on doing a huge build at this time.

[many]

Church Auto

His dyno is just a tad over happy!

[sdsu_celica01]

Ahhh good, heard great things about Church Auto, good choice!

Ok, you'll want to go with a full disc clutch, medium clamp load so it still street-able. ACT HDSS is a great choice your looking around $400. Let me know, we can give you an even better deal if you dd it in with a kit :)
pm'd
His dyno is just a tad over happy!

Maybe, but his tuning is done well.

[RWCustoms]

TK: yep its sal. Lives only a few blocks from me. Unfortunately PAS Mag article didn't even mention his name. Only pics of the car. Either way its cool to have it in a Mag.

Sent from my SGH-T959 using Tapatalk

[TurboKits.com]

Received and replied :)

pm'd


Maybe, but his tuning is done well.


Yeah, we were able to squeeze pics of the car into a tech article we wrote for them, but was pretty cool to see it inked!

TK: yep its sal. Lives only a few blocks from me. Unfortunately PAS Mag article didn't even mention his name. Only pics of the car. Either way its cool to have it in a Mag.

Sent from my SGH-T959 using Tapatalk