View Full Version : Stock Fog Light Bulb Replacement
08-05-2002, 05:26 AM
Anyone know how hard it is to replace the bulbs on the fog lights?
08-07-2002, 04:55 AM
Ya might have to do a search from waaaaaaay back. It's a pain in the ass if you don't know what you're doin, but all I do is
Bend the plastic back in the wheel well to get to it,
twist the black backing off,
take the clip off,
and put everything back.
DON'T TOUCH THE BULBS....easier said than done.
Do it on the driver's side first so you can see what you're doing...the passenger side requires you to do it blind.
Have fun! :thumbup:
08-07-2002, 07:35 AM
how's the plug connect to the bulb's wire? H3 bulbs, correct? I looked at the fogs for a second, and was like screw it, and got somebody else to do it......
08-07-2002, 07:43 AM
Why should I not touch the bulbs? The Oil from my hand? I could put some gloves on...
08-12-2002, 12:57 PM
first take out your bumper then you see your fog lights back cover take it out i think you need to twist it to your left to open then uncrew the bulb ground and pull the power wire i think its color white then change it ... note do not hold the bulb ....good luck....
vBulletin® v3.8.6, Copyright ©2000-2013, Jelsoft Enterprises Ltd.