Attn: Blue Batmobile

[jonasblack]

You don't know me but I saw your car at the meet today and mad props on the tail light mod you made. I was wondering if you would be able to design or make something simular but for the headlights. I had an Idea abut a design but wouldn't know where to start. Look at my sig, that is what I would like to do but have no Idea how to do it.
thanks a lot man!
Mayco:)

[Blue Batmobile]

Thanks Man;). I'm actually working on a headlight overlay, but it's going to be more subtle than what you've shown me. I'm too busy right now filling orders for my taillight kits. Anyway, are you looking at doing your mode with vinyl? Looks like you've got most of the headlight covered other than the 2 holes have. You may run into problems with not enough light coming through. Test it out first with cut outs, and see how much light actually goes through. You gotta remember that the light from the projector lamp also reflects on the chrome housing within the headlight assembly, so what your doing with your mod is keeping that reflected light from coming through. Notice the TRD headlight covers. They don't cover any part of the actual chrome housing, they only cover the back part where there is no light whatsoever.

Your idea looks good, but you'll need to test how functional it really is. When I did my tailights, I spent many hours trying different designs, making sure the light is not obstructed in any way. Time and patience is what you'll need most. Best of luck to you:).

btw- Look for my headlight mod in "Mods Forum":).

Bat

dubbleA@peoplepc.com