tappin the fuel line

[hi ho silver]

sorry, i know this subject came up multiple times.. but im tapping the fuel line.. and i just wanna know.. what the hell is beyond the rubber? like some kinda metal tube or plastic? should i use like a lil saw to cut it or what? is there anywhere i can disconnect the fuel line and stick the T there rather than cutting the line?

[vatik]

i don't have an answer for you but i do have another question for the one to answer this thread: why would you do this? is it for a wet shot?

[hi ho silver]

you got it!... or it could be for a sending unit for a fuel pressure gauge... i think.

[Cabel]

It's just plastic, it's hard to cut but I just used some side cutters to cut mine behind the battery. Hold a cloth around it when you do it and make sure to take the cap off the fuel tank.

Famous last words there should only be a couple tblspns of fuel, hahahah mine was more like 1-2 cups.

Have fun w/ the T I found it a real pain to get it shoved in there all the way.

[JimmyPusPounder]

use a hairdrier to heat the plastic up, then it is a little easier to insert the T.

[hi ho silver]

ok thanks i just wanted to make sure cutting it wouldn't like crimp the tube inside.

[ToyoGT]

tighten that b!tch on REAL tight because the hose will shoot off if you don't :(