show me a video -------lambo doors

[Scholle]

I think this this gets in rather complicatedly is.
what are your experiences like? Somebody has a video of it and get out for one. ;)

[GT-Skid]

I could make you one this weekend and if someone could host it for me then i will post it for everyone. If not i will make it and will e-mail it to you.

Let me know.

Jamey

[dexthageek]

GT-Skid, PM me with file size and I might beable to leave it up on a server for a short period of time.

[GT-Skid]

ALright, i will make it this weekend and let you know the file size as soon as i can.

Jamey

[DookieGraphics]

woo hoo!!! i would like to see how this works. I really want to do this too, but west coast doesn't have a reputable shop that i know of that will do this. ERRRRRRRRRRRRrrr

[PhatCellyGT]

They don't have to be like certified or anything...And good shop can do the install. The only bodywork that has to be done is cutting the inner fender out (if you call that bodywork)

[Nu Concept]

welcome scholle- i remember you from ecelica.
I found this video a while ago off of autoloc. its a video of their universal motorized kit- the fabrication was horrible though.
http://www.autoloc.com/products/lambo.lasso

just click on the pic of the civic, titled: video

[PhatCellyGT]

autoloc is junk :gay:

[Mistrimeat]

omg, that vid on autoloc.com...watch it closely, you can see the door wobbling as it opens...looks like it might fall off. Plus who in the hell would sit there and wait 20-30 seconds for their door to fully open when they wanted to get in/out? Rediculous!

[PhatCellyGT]

That's why I haven't done that to my Decah kit yet...Not till I get another daily driver. Can you imagine if it was raining hard and you had to stand there and wait for your door to open? Or what would happen to the interior

[devilincelica]

your right that thing dont look to sturdy

[evil eye]

hmm a 30 second wait and it looks like its about to fall off, wow, sounds like a good way to blow a couple of grand.

[Scholle]

@ Nu Concept , Thank

[GT-Skid]

I forgot to bring my Digi Camera to work today so it will not be up until Monday. I took three videos. One of how to get into the car. One from the inside getting out of the car (both from the drivers point of view) and the third is getting in and out from about 3ft away.

Jamey.

I think the largest file size is going to be about 2.5 megs. I hope that someone can host it.

[Don't Sleep]

Yeah, stay away from that Auto-loc crap,and Springman's. If you want doors that work and look good, go to www.carexcess.com for the Decah system.

[GT-Skid]

Originally posted by Don't Sleep
Yeah, stay away from that Auto-loc crap,and Springman's. If you want doors that work and look good, go to www.carexcess.com for the Decah system.

Dude how are you bashing springmans??? Have you had any work done there.

The vid will be ready around 4:00 today. Can someone host it??

[Wicked8o8]

Please someone host, I wanna see what this is all about.

[dexthageek]

what is the file size
depending on the file size I may beable to host it for a couple days..

EDIT: If the largest file size is 2.5 Meg I will host them for you..PM me when you are ready

[Andy00GTS]

I'll host.. any size is fine just drop me an email justchil@justchil.net

[kocheroni]

i can host it also if you want, assuming it's not super duper big. instant message me: sskocheroni, or let meknow what you want to do.

[GT-Skid]

Sorry for the delay folks. My work computer crahsed and i lost the files. I am making new one tonight and they will be ready first thing in the morning.

Again sorry for the delay.

Jamey

[GT-Skid]

Sorry weather was ****ty last night. I am in the process of making the vid. as we speak and will be e-mailing it to dexthageek tomorrow as he is being nice and is hosting it for us.

Jmaey

[Wicked8o8]

You can go to car excess page. There are pics of the door closing. It doesnt seem that difficult cause you can close them while seated and an average looking girl is closing the door so difficulty should be minimal.

[Scholle]

please ,show me video or picture :applaud:

[GT-Skid]

I e-mailed the vid to dexthageek. I was going to walk thru and describe it step by step but after the first vid it sounded really stupid. The best vid is the one from a distance. Don't mind the squeak in the door as i just clean it up from my first grease job and have not put any grease on them yet. So normally they do not squeak like that unless you need some grease.

This is the original springmans kit that wasn't a direct bolt-on, but i have Mark's kit. I will be going back there shorty (Springmans) to get the height to come up alittle more then it does now, but it is not all that hard to get in or out as you can see i did open the door while holding the digi camera.

Also, the vid quality is bad as i had it on the smallest setting to conserve file size.

Jamey


DEX,

Let me know when it is up.

jshirley@ctechpgh.com

[dexthageek]

The Videos are up!!!!!

Check them out here

http://dexthageek.com/celica/lambo.html

If you any problems viewing them let me know

Mike

[Beast]

Cars with those doors look fly (hey early 90's?), and I may be wrong, but those videos make those doors look pretty flimsy. They looked like they were shaking the whole time.

Still, they look awesome. I guess you have sacrifice steadiness for sweet looks.

[Ugly Pete]

i never wanted them before, and i definately dont want them now that i watched the video.

[Mistrimeat]

Eh, too much trouble to open/close, plus they look wobbly. Too pretentious looking.

[SF GT]

Doesn't look sturdy imo.

[GT-Skid]

Originally posted by Mistrimeat
Eh, too much trouble to open/close, plus they look wobbly. Too pretentious looking.

Opening and closing them are not that bad once you get used to it.

The doors do wobble but that video does not do them justice. I should of opened the doors and had my buddy film it because he made it look alot worse then they are.

I will make a better one to show how it is actually pretty stable this weekend.

Jamey

[trog2233]

Nice videos jamey.......i still wanna see this in person....

i don't know if u did it on purpose or its just the video but it looks like ur doin everything in slow motion :rofl:

[GT-Skid]

Nate,

It was for video purposes (i think).

Jamey

[Ntence99]

ne 1 have video of the decah kit?

[WillyWonka]

Originally posted by GT-Skid


Opening and closing them are not that bad once you get used to it.

The doors do wobble but that video does not do them justice. I should of opened the doors and had my buddy film it because he made it look alot worse then they are.

I will make a better one to show how it is actually pretty stable this weekend.

Jamey

Any door opening shouldn't take experience for it to look good.

[GT-Skid]

Originally posted by Ntence99
ne 1 have video of the decah kit?


This is decah

[oneflyasianguy]

too bad they cant make them slowly automatically raise when you lift the handle that would be sweet, i think the video makes them look cheap they need to be more sturdy.

[YellowCelica_GT]

I see you got your lambo doors from Springman's. I got my Lambo door kit from Car Excess. It looks like Springman's modified the Decah kits quite differently from Car Excess.

Oh my God, do your doors wobble! I was quite shocked when I saw those videos. Your videos make the lambo door kit look so unsturdy. Mine are a lot more sturdier than yours. I will post a video of me opening and closing my doors (from Car Excess) SOON! I will post the video in a new thread....Stay tuned!

[RichGT]

yeah it quit unstirdy. what would you have to do inorder to have it stirdy?

[WillyWonka]

I saw J's (Baldhead_J's) doors over the weekend and they were very stable. I didn't ask who installed them or where he bought them, but Will (PhatCelly) and others would know.

[celica girl]

I'm pretty sure baldhead J got them from car excess....

[MicaCeli]

J got his kit from CarExcess and had CCi install it.............so thats why their stable :D

[Ntence99]

are the kits that hard to put on where u have tpo pay some1 to put them on?