Ixs

[Wicked8o8]

Did any of you enter that show. Im not close to any one on this forum, so I have no idea what celicas you drive. However, I seen two celicas, and it would be nice to match a car to a person.

Being thats the case, can you guys list some info about your ride

White 2000 Celica GTS
TCS kit
C/F hood (gun-metalish)
18x8 ADR Kasai (black)
Eibach Prokit
Thermal Exhaust
shaved wing, rear wiper, "celica", molded hatch
*edit* 2003 tail light conversion

Exterior description is fine, cause thats all Im gonna see.

I was gonna sell my ride a while back, but had to do some stuff first, will be for sell soon. Thanks.

[Kaizer-Souze]

silver celica with 17" volk le 37t's and tanabe racing medallion exhaust
soon to have.... alot if it ever gets here

[skamikaze]

i dunno if anyone here even bothered to go to the show. i completely forgot about it. it wasnt on my list of things to do anyway. but yeah my gts pretty much looks stock :) ive done things here and there to the car, but nothing real major. but if you see J-RIDIN... thats me!

[QWKsilvr808]

Silver GT-S. C-ONE (lip) kit, Cusco T2 wing, JDM tinted headlights and bumper lenses, '03 tails. Tanabe PRO SS coilovers, Espelir JGT500 exhaust. Volk LE37-Ts... and some other stuff.

I didn't go to the show either... kinda betted on it being a waste of time and money. From what I heard, it was. Apparently they were pretty much giving booths away trying to get cars to enter.

I'm glad I worked that night.

I like the TCS kit btw... how long have you had it? I saw a car that matches your description several months ago parked upstairs in front of Barnes and Noble at Kahala Mall. I just saw a custom gunmetal(ish) Celica with a TCS kit and slammed on 18-19" RH EVO C5's. That car was pretty nice looking.

Glad to see you in the Hawaii forum. :)

[matrixguy707]

2003 Black Honda Civic Si
New Pioneer Deck
Border Collie on board
no mods yet

[kardician]

EDITED LIST just to make like i've done a lot:

Black
17" ADR kasai (silver)
yokohama es100
sexy car model
TRD kit w/ oem spoiler
red TYC's
custom black interior
check engine light
gts shift knob ;)
pioneer 6400
tokico shocks
tokico springs
bat's h4 overlay kit
red center console lights
s2k antenna
carbon fiber rear celica decal
30% reflective tint
viper 550 w/ remote window operation
hpd license plate frames
HKS exhaust

http://www2.hawaii.edu/~kyler/celica/celica.jpg

[ohmygts]

Tony spec blue gts

"secret "front end
kam sides
ww rear
aero drift wing with custom brackets
trd headlight covers
trd clear fuel lid
jdm side markers
ap carbon fiber hood
c-one hood scoop
piaa yellow fogs
trd exhuast
tyc tail
tint
kasai black rims
bomex mirrors(on order)
front and rear crossed and slotted rotors
custom panel
4 automet guages
trd guages
carbon bezel
trd horn button
02 front grille
all molding painted spec blue
jdm door sills
custom spec blue interor panels
alarm
plexi center council
custom sterring wheel leather wrap
special trd 6 speed emblem
razon ra65 300g carbon shift knob
piller guage pods
powder coated valve cover
polished intak runners
rear trd strut brace
injen [polished spark plug cover
injen polished engine cover
polished strut tower brace
trd oil cap
blitz intake
spec blue colored panel
color match engine bolts
clarion 2003 vrx935 dvd player
xtant 909 amp
xtant 303 amp
crystal mids and highs
kicker subs
rare trd emblems
apc polished fire extingisher
and much more........................some things I forgot

[dsquared]

hey clint why didn't you just show your signature? doesn't that list everything you have? just a thought ;)


'01 Super White GT-S
Wings West Kit w/ OEM Spoiler
MB Autosport Raised Hood Scoop
TRD Springs
TRD Exhaust


yeah didn't bother to go to the show either....i've finally learned that streetcar showoff is the only car show worth going to
:gap:

[QWKsilvr808]

my sig has most of what I have on the car. Some things are left unsaid. :)

Damn Tony, I didn't know you were gonna order those mirrors already. I woulda ordered them a while back but I was waiting for you!! :wtc:

[da808GTSboi]

Red 2000 toyota celica GTS 6-speed
Rod millen full kit+ wing
VIS carbon fiber hood with raised scoop
Bronze 17 inch volk TE37's
tanabe racing medallion exhaust
H&R sport springs
TRD eyelids
JDM amber side markers
PIAA superhiwte bulbs

[Wicked8o8]

Ive had my car like this about a month. Before I had a buddy club kit. Its nice to see a few of you responded. Keep it up.

As for the show, it was ****ty. But i took my son to see 2fast on friday and he kept asking to go to the show after that. Oh well, at least I got some bonding time.

Also, I was thinking of powdercoating my rims. Usually I dont ask for suggestions, cause I think I got some sorta style. But I cant choose between doing em again in white or gold. I think white is clean, but I seen a white STI with the gold rims.. it was dope. Decisions, desicions..

[ohmygts]

I think there is still time to order them if you want....not sure if the order went through yet. I know there is a waiting period of two weeks or so.

[skamikaze]

Originally posted by ohmygts
Tony spec blue gts
"secret "front end
busted WW front lip, some secret :gap: hehe jus kiddin tony. i wont let the cat out of the bag yet...and i know about the "puppy" mod too :D thats gonna be sweet, i wanna get it too.

that mod list is so damn long dude, you didnt have to list every single thing. i fell asleep before i got to the end :gap:

[Taesup]

damn your list is long tony.

well you can just look at my sib but there are a few things that have been changed here and there. Upgraded the sub, lost the rims, and I think the amp is upgraded too.

[143hawaii]

Sold my Celica and own a MR2 Spyder now but still troll around here. If you see the only turbo'd Spyder driving around, chances are it's me.

[ohmygts]

lol....I did it for me. Sometimes I forget the stuff that I have. Its good once in a while to list it. Hush Hush on the "puppy" mod.....lol

[kardician]

Originally posted by 143hawaii
Sold my Celica and own a MR2 Spyder now but still troll around here. If you see the only turbo'd Spyder driving around, chances are it's me.

hey... what kind of celica did you have?

[A22R-TE]

Tony has puppy mod huh?

My dragon style will defeat his puppy style *huh* *huh* *SHYAAA*

I will bring out...........Two..............cars............Wah taaaa!!!

[skamikaze]

tony you forgot to list your cool cigarette lighter thing in your sig :)

[QWKsilvr808]

Originally posted by kardician


hey... what kind of celica did you have?

Mitch had a Carbon Blue GT 5-speed, with several mods. :) Now he's finally gotten boost!!!

Tony, let me know the dealio on those mirrors! I really want a set, unless you don't want me to run them since you have them on order. :)

[QWKsilvr808]

Originally posted by A22R-TE
Tony has puppy mod huh?

My dragon style will defeat his puppy style *huh* *huh* *SHYAAA*

I will bring out...........Two..............cars............Wah taaaa!!!

My munky style defeats your dragon style!! ya whaaaaa yoiyahhhhhh!!!!

[QWKsilvr808]

Originally posted by Wicked8o8
Ive had my car like this about a month. Before I had a buddy club kit. Its nice to see a few of you responded. Keep it up.

As for the show, it was ****ty. But i took my son to see 2fast on friday and he kept asking to go to the show after that. Oh well, at least I got some bonding time.

Also, I was thinking of powdercoating my rims. Usually I dont ask for suggestions, cause I think I got some sorta style. But I cant choose between doing em again in white or gold. I think white is clean, but I seen a white STI with the gold rims.. it was dope. Decisions, desicions..

I think gold would look dope! That's where my vote goes. :) How was the movie? I've heard good things about it... I'll prolly go see it on my next day off.

[dsquared]

i just saw mitch this morning in the UH parking structure....and OHHH MAN!! his blow-off valve sounds ohh soo sweet!! thanks for the demo mitch!

[ohmygts]

oh yeah.....the lighter.

Clint if you want the mirror let me know and i can get them on the same order as mine. Order will be put in about a week or two. Bomex delayed again.

[koacash]

where would one go to get their rims powdercoated? i only heard of one place, Hi-tech coatings, dont know much about'em..... how much does it cost per wheel?

oh and for my car:
black gt
hotshot(header) emblem on back in place of gt one, no toyota emblem
18" gunmetal colored tantrums
blacked out windows
tein ss
black altezzas
s2000 ant.
thats about it for outer appearance.....

[143hawaii]

Originally posted by QWKsilvr808


Mitch had a Carbon Blue GT 5-speed, with several mods. :) Now he's finally gotten boost!!!

Tony, let me know the dealio on those mirrors! I really want a set, unless you don't want me to run them since you have them on order. :)

Yep, the new owner's actually goes to UH! I see it in the structure and always park next to it for some strange reason when I can. My parts still live on through Ed's car! :)

I guess I'll join along in the listing of long sigs (I'd never suggest anyone do this in ForumsHawaii.net :AF: )

MR2 Spyder 5spd
Top Secret Turbo Kit (Trust Turbo)
Greddy Airnix Air Filter
Ball-n-Spring MBC
J&S v1.0 (knock/boost retard)
S-AFC
7th Gen Celica GTS Injectors
Denso Iridium IK20 Spark Plugs
HKS SSQV BOV
Aquamist 2D Water/Methanol Injection (in the works)
+ Accumalator
+ JAZ 1g Vert Fuel Cell & Low level indicator
Oil Cooler off of a Callaway Turbocharged Scirocco (need a block adaptor still)
Pelican Racing Front STB
TRD Underchassis Member Braces
Custom Subframe Antiflex Flate
H&R Sport Springs
Clear Corners
True Grey 5% Tint
Custom Molded Driver's A-piller Single Gauge Pod
JDM Dash NAV Pod
Autometer Boost, Oil Temp, and Oil Pressure Guages (only bst installed so far, I'm getting there)
TRD Billet Aluminum E-brake Handle
Voodoo Polished Billet Shift Knob
Yokohama AVS ES 100 Tires
Modified JDM Front Badge
Custom JDM Steering Wheel Badge
Painted Calipers with "Spyder" Logo
Alarm

Deez it!

[QWKsilvr808]

are you having trouble finding a block adapter Mitch?

[kardician]

Originally posted by dsquared
i just saw mitch this morning in the UH parking structure....and OHHH MAN!! his blow-off valve sounds ohh soo sweet!! thanks for the demo mitch!

LOL, i just saw mitch this morning too walking from the structure to my office.

[Wicked8o8]

143... Turbo :headbang:

Gold-1

White-0

I know two places that powdercoat. The place you said and sunset powder coating. Cost varies due to rim material, color, type of coating now (removal cost), two tone (black with polish lip), and size. But to give you an idea, it costs about 3-4 for 18's in one solid color.

As for the movie, it was better than the first in story, racing scenes (not really a drag race anymore), rice went down so thats a plus!

[143hawaii]

Originally posted by QWKsilvr808
are you having trouble finding a block adapter Mitch?

I found one for $80 (not the Greddy one) but I'm having trouble giving them the cash. :(

Yep, I also say Delo today @ school as I hurried home to sleep. Man I hate 7:30am classes. If any of yolu see me early @ UH I'm usually a zombie that thinks two things, eat/sleep since I barely have anytime to eat. I got home today and slept till about 2pm! Woohoo! :D

[QWKsilvr808]

Did you not want the Greddy adapter? I got mine for $65.... I can find the site I got it off if you gimme a minute.

[Wicked8o8]

So anybody have a suggestion on white or gold rims on a white celi... holla back

white-1
gold-1

[da808GTSboi]

i personally like gold, hell my rims are bronze so im pretty much biased to that side of the spectrum. Gold/bronze rims on any car give it a very JDM look. You mean business with gold rims. I think white rims are more for show. However white TE37's are very popular with JTGC race cars.

[dsquared]

i think white on white is nice but a little risky if the two whites are mismatched....i should know, my kit doesn't match up to the color of the car....brand spanking new white rims will definitely stand out as far as the brightness of the white, if you know what i mean

[143hawaii]

Originally posted by QWKsilvr808
Did you not want the Greddy adapter? I got mine for $65.... I can find the site I got it off if you gimme a minute.

I don't mind if it's Greddy or not but I know it's a real tight fight under there. Another member had to grind/file down his for it to fit. I know this baby here will fit:

http://www.cantonracingproducts.com/adapters/oil_cooler_sandwich.html

But $80 is a bit steep. How did the Greddy piece fit? Where'd you find it?

[ohmygts]

go gold..........

[kardician]

bump for my edited list

[QWKsilvr808]

Originally posted by 143hawaii


I don't mind if it's Greddy or not but I know it's a real tight fight under there. Another member had to grind/file down his for it to fit. I know this baby here will fit:

http://www.cantonracingproducts.com/adapters/oil_cooler_sandwich.html

But $80 is a bit steep. How did the Greddy piece fit? Where'd you find it?

The fit is tight too... but it should be perfectly alright if you're not gonna use any or both of the other fittings to run temp/pressure sensors. I had to snug that last fitting close to the block to use the fittings to tap my two sensors, so if I ever want to run an oil cooler using that last one, I'll prolly have a really, if not impossible time. For just the oil cooler tho, and maybe one sensor, you can prolly mount it with enough angle to allow clearance for both the oil line and the sensor.

I got mine from http://www.nipponracing.com -- I just checked, but the site is down right now. You can try contacting the person I dealt with, Trygge Toven at sales@nipponracing.com and see if he can help you out even if the site is down. They took 2 days to get the adapter in, and another couple days to ship it to me. I recommend them.

I've also found that adapter at good prices (in the $60ish range) at other sites tho... altho some others have lofty pricing in the $100 range.

So far so good! The piece looks nice and I don't have any leaks. :)

[Wicked8o8]

Lot of good points came up for gold. But do you think there will be any downside to making them gold? I prefer gold. Thanks guys.

[QWKsilvr808]

Can't see a way to go wrong with gold. It seems to match almost any color car, and it's prolly easier to keep clean. Are you going for a dark gold or a bright gold? Something more along the lines of the color of the STi rims, or something like the gold Volk uses on the GT-Ns?

[Wicked8o8]

looking more at the sti color. what you think? too bling-bling? I personally think that its an eye catcher, but yet it flosses with a jdm-ish style.. I dont know, Decisions.. decisions..

[skamikaze]

nice photoshop model job kyler! :D

sorry im late on the vote...but i say gold too! :thumbup:

how much is it to powder coat wheels anyway?

[Wicked8o8]

powder coating varies depending on what they gotta do and size. But to give you an idea, 18s in one color runs from 3-4 bills.

[skamikaze]

for a set of four right? is there like a large selection of colors or are you pretty much stuck to certain shades? i know on the mainland you can order a shetload of colors :)

[QWKsilvr808]

Originally posted by Wicked8o8
looking more at the sti color. what you think? too bling-bling? I personally think that its an eye catcher, but yet it flosses with a jdm-ish style.. I dont know, Decisions.. decisions..

I was just looking at a black STi at Hypers today with the gold BBS rims. They certainly are the dope shyt! I give that shade a thumbs up. Hell... looking at that car almost made me go down to Subaru to check 'em out.

I think I'd better stay the f*ck away from Subaru dealerships from now on. I might just get stupid enough and buy one.

I'd rather have that shade than the gold used on the GT-Ns.

[143hawaii]

Thanks Clint, I'll check it out later since I'm feeling pretty sick right now. I think I caught a cold from my friend :( But I don't really need any ports for my gauges since I'll just tee off from my oil feed lines. What size are the ports? I'm looking for something around 14mm or -8AN.

[Wicked8o8]

QWK.. yeah, I was leaning towards the STi shade. It was perfect cause I seen a white one with em and that pretty much solidfied my decision. It was the first thing to catch my eye... I think my decision is set. Thanks guys.

[QWKsilvr808]

Originally posted by 143hawaii
Thanks Clint, I'll check it out later since I'm feeling pretty sick right now. I think I caught a cold from my friend :( But I don't really need any ports for my gauges since I'll just tee off from my oil feed lines. What size are the ports? I'm looking for something around 14mm or -8AN.

I gotta check what the size is of that port... lemme go find the box.

Wicked808, great choice I say! :thumbup: