nitrous wot switch.

[minhtin]

where do you guys mount these puppies?? i dunno how to mount this near the throttle body. can i just mount it at my gas pedal? pictures also helps hehe thanks.

[2-fastcelica-02]

I WOULD RECOMMEND PLACE ON THROTTLE BODY

[minhtin]

got any pictures?

[IRL]

Originally posted by 2-fastcelica-02
I WOULD RECOMMEND PLACE ON THROTTLE BODY

Why would you recommend that??? Makes no sense to me to place the switch out there....

I placed my switch near the top of the gas pedal swing arm. If you stick your head up under the dash with a light, you should see a few good places to mount a switch. Be creative...position the switch where it would make contact with the gas pedal down...then try find creative ways to hold it there in place.

Its very simple to do.

[Calsoldier]

Most people actually put it near the throttle body... but what's this switch look like anyways? I'm just wondering?

[Lilsupra]

If u mount it near the gas pedal u could definitly break the throttle switch...its so fragile...

[cmiguel32]

I took piece of metal from lowes hardware used for door hinges, and some washers. I drilled the wot switch to the straight/flat piece of metal and i unscrewed one of the bolts on the throttle body and placed the washers on the bolt. I then placed the metal piece on the bolt and adjusted the angle so it would click when the gas was all the way down. If i had my car i would take pictures of it.. but the engine isn't even in it now anways :P

-Chris

[InEEdBooST]

Originally posted by cmiguel32
I took piece of metal from lowes hardware used for door hinges, and some washers. I drilled the wot switch to the straight/flat piece of metal and i unscrewed one of the bolts on the throttle body and placed the washers on the bolt. I then placed the metal piece on the bolt and adjusted the angle so it would click when the gas was all the way down. If i had my car i would take pictures of it.. but the engine isn't even in it now anways :P

-Chris


sounds like a great idea...is this switch like a push button then? i dont mean to sound stupid i would like to verify my thoughts :thumbup:

[InEEdBooST]

btw where did you buy the switch from?

[cmiguel32]

The switch came with the nx kit, it has a long metal piece that hangs off and the way i mounted it, the throttle pushes on it to click the switch down.

[larryd]

I cant imagine putting it on your gas pedal, I would think itd break off to easily as its very fragile piece. I had mine on the throttle body, just took off the cable mounting bolts and put it there, bent the little rod a little bit to make it work when the TB went WOT.

[xkrnplayboyx]

can someone take an upclose picture please?