Billet Throttle Rotor: Special:

wrleo · 07-02-2006, 06:10 PM

The throttle rotor installs in less than 30 minutes, sliding on top of your OEM unit. This product is made of AL6061 Billet Aluminum and then Hard Anodized. The WR Throttle Rotor is Computer Designed to reduce the turning ratio of your throttle body rotor, to increase throttle response and reduce the time it takes your car to get to FULL THROTTLE by 50%.

MSRP: $45
Special: $30 SHIPPED

Paypal me at: Leo.now@weapon-r.com
Item will ship within 2 business days.
Tracking number will be included and emailed to you.

hawaiianboy · 07-02-2006, 08:20 PM

do you have any pics of it installed and so you dont have to take apart the oem unit?
Thanks

wrleo · 07-02-2006, 08:26 PM

This unit installs on top of your OEM Throttle rotor .
Dont need to remove the OEM one.

dachusa · 07-02-2006, 10:16 PM

what colors do they come in? Is it just red, silver and blue?

vegeta4ss · 07-02-2006, 11:41 PM

so basically this thing will let you make the throttle cable super tight while staying at that closed position to keep idle from going thru the roof?

Have you sold any of these to celly members of this board? I know you said you have put them on cellys before but anyone's from nc.org?

Ch33z · 07-02-2006, 11:49 PM

can we get a better explanation on how this will reduce the turning ratio of the throttle cable by %50? i just cant seem to picture it in my head..thanks

vegeta4ss · 07-03-2006, 12:00 AM

I am trying to picture it too and from what I am thinking I will have to let the cable out a LOT to reach anything but the lowest insert spot

hawaiianboy · 07-03-2006, 02:18 PM

True, anybetter explanations?

Carbonized_GT · 07-03-2006, 02:34 PM

im in the area, i can be a tester if needed..

grimreaper253 · 07-03-2006, 04:50 PM

i have one i my car, it was realy easy to install and i noticed a little bit better throttle response.

vegeta4ss · 07-03-2006, 06:04 PM

anyone else with experience on this part?

**jlitman** · 07-03-2006, 06:06 PM

I'm interested too -- I think if WR offers one to a local for testing and review, a lot of folks would be interested if it is found to work well

Carbonized_GT · 07-03-2006, 06:14 PM

=D im local.

wrleo · 07-03-2006, 10:52 PM

Anyone who is local can come by and try one out.. Just ask for RAY.
If you like it you can buy it. We also offer dyno time for anyone intrested.

While your there you can check out the Race Header also.

wrleo · 07-03-2006, 10:53 PM

The throttle rotor installs in 30 minutes, sliding on top of your OEM unit. This product is made of AL6061 Billet Aluminum and then Hard Anodized. The WR Throttle Rotor is Computer Designed to reduce the turning ratio of your throttle body rotor, to increase throttle response and reduce the time it takes your car to get to FULL THROTTLE by 50%.

Carbonized_GT · 07-03-2006, 11:24 PM

where are you guys located so i can swing by later this week.

oONoGoAutoOo · 07-04-2006, 08:23 AM

Quote:

Originally Posted by Carbonized_GT

where are you guys located so i can swing by later this week.

let me know when u go. i wanna swing by also. i think they are located in sf.

dont u get the same feeling by just tightening your throttle cable?

fastcelicagt22 · 07-05-2006, 11:45 PM

you cant tighten your throttle cable by that much. maybe 5-10%

TRlPPlN · 07-06-2006, 12:42 AM

not too far from san mateo alex. its at ssf. an exit almost after 380-280 junction.

Carbonized_GT · 07-06-2006, 12:46 AM

their website doesnt even show their address.

vegeta4ss · 07-06-2006, 09:28 AM

you guys gotta find that place so we can see if this is bogus or worthwhile. I mean for 30 bucks i dont expect much, but maybe WR can prove me wrong. In the past I have been weary of any of their products, but since the release of this race header..maybe these guys can start turning out good parts for all of us to benefit.

wrleo · 07-06-2006, 09:54 AM

Quote:

Originally Posted by Carbonized_GT

their website doesnt even show their address.

http://www.weapon-r.com/aboutus.html

Speed4TheNeed · 07-07-2006, 06:44 AM

PayPal sent ( CAddison@bellsouth.net ) 2000 Toyota Celica GT-S and I would prefer the polished version. Thanks.

I also have your race header...I'm interested in doing the 2.5" pipe conversion (instead of the 2.25") with the short pipe that's welded to the end of the flexpipe. Any info on this would be helpful.

vegeta4ss · 07-09-2006, 10:41 PM

Quote:

Originally Posted by Speed4TheNeed

PayPal sent ( CAddison@bellsouth.net ) 2000 Toyota Celica GT-S and I would prefer the polished version. Thanks.

Make sure to post your results so some of us can decide on ordering. I was gonna get one, but it looks like you beat me to it Caleb.

Carbonized_GT · 07-10-2006, 07:11 AM

Quote:

Originally Posted by wrleo

http://www.weapon-r.com/aboutus.html

that link takes me to mapquests homepage.

but i found it anyways...

dachusa · 07-14-2006, 09:58 AM

Bump. Any news on dyno?

Speed4TheNeed · 07-15-2006, 08:10 PM

Quote:

Originally Posted by dachusa

Bump. Any news on dyno?

Why would you need a dyno? This isn't a power performance part, it's not going to make you're car run stronger. What it's supposed to do is quicken the time it takes to get to full throttle (from a throttle point of view, it's similar to a short shifter from a shifting point of view).

TRD-CELICA-GT02 · 07-15-2006, 08:39 PM

Keep us updated on the results Caleb once you install it. I'm interested in this too but want to know if it's worth purchasing.

Ch33z · 07-21-2006, 04:40 PM

Quote:

Originally Posted by grimreaper253

i have one i my car, it was realy easy to install and i noticed a little bit better throttle response.

can you take some pics for us to see?

vegeta4ss · 07-21-2006, 09:13 PM

Leo are these still available?

I was hoping for some more information from others that own this product, but i dont think its going to be available.

Send me a PM and let me know the status of this sale.

northvibe · 07-24-2006, 05:44 PM

Yeah any update on people that have used it and if they are still available wrleo?

nikos · 07-27-2006, 03:12 PM

Quote:

Originally Posted by wrleo

The throttle rotor installs in 30 minutes, sliding on top of your OEM unit. This product is made of AL6061 Billet Aluminum and then Hard Anodized. The WR Throttle Rotor is Computer Designed to reduce the turning ratio of your throttle body rotor, to increase throttle response and reduce the time it takes your car to get to FULL THROTTLE by 50%.

I'm interested too.How much shipped to 54642 Thessaloniki-Greece?Do you excepcash through Western Union?
thanks
nikos

grimreaper253 · 07-27-2006, 03:35 PM

i can post some pics up tommorow of it. i installed it on my 03 gt

R0ME02984 · 08-03-2006, 10:53 AM

Pics?

Ch33z · 08-03-2006, 12:04 PM

yooooooooo....we need pics and more infooooooooo

Rico6983 · 08-03-2006, 12:13 PM

is it easy to install yourself?

Quote:

Originally Posted by Ch33z

yooooooooo....we need pics and more infooooooooo

.

vegeta4ss · 08-03-2006, 01:20 PM

yeah where's some pics?

wrleo · 08-03-2006, 03:07 PM

i have sent out like 10 sets already no one can take some pictures?

crasher2 · 08-03-2006, 04:03 PM

I saw something like this listed on ebay a few months back. I could never get an email back on how it worked, would really like a good clear explaintion on this.

itz smokin · 08-03-2006, 05:19 PM

whoever purchased one, please give us some feedbacks on it. thanks

wrleo · 08-03-2006, 08:03 PM

The clear explaination is on our website.
I will post some pictures of it installed in the next few days.

northvibe · 08-10-2006, 01:12 PM

Is the $30 shipped deal still going on? if so I'll take one

wrleo · 08-10-2006, 06:40 PM

still available..

crasher2 · 08-18-2006, 01:43 PM

where are the pic?

wrleo · 08-18-2006, 08:49 PM

crasher2 · 08-19-2006, 05:16 AM

Will someone explain how this works!!!!!

vegeta4ss · 08-19-2006, 06:31 AM

Leo, sending payment for one.

wrleo · 08-20-2006, 06:51 AM

go to our website. www.weapon-r.com

vegeta4ss · 08-25-2006, 10:56 AM

recieved mine. Will post feedback once I install it (should be monday morning when i get to it.

thanks again Leo!

cesar418 · 08-25-2006, 06:13 PM

hey i checked the weapon r page and i saw a check engine light eliminator how does that work and how much is chipped to 85022??
thanks

Install Guides	Parts Catalog	Gallery	Track Times	Dyno Database	Tech Info	Gear

Register	FAQ	Members List	Calendar	Search	Today's Posts	Mark Forums Read
								Celicas For Sale

07-02-2006, 06:10 PM	#1
wrleo Registered User Join Date: Feb 2006 Location: SF Posts: 154 iTrader: (3)	Billet Throttle Rotor: Special: The throttle rotor installs in less than 30 minutes, sliding on top of your OEM unit. This product is made of AL6061 Billet Aluminum and then Hard Anodized. The WR Throttle Rotor is Computer Designed to reduce the turning ratio of your throttle body rotor, to increase throttle response and reduce the time it takes your car to get to FULL THROTTLE by 50%. MSRP: $45 Special: $30 SHIPPED Paypal me at: Leo.now@weapon-r.com Item will ship within 2 business days. Tracking number will be included and emailed to you.

07-02-2006, 08:20 PM	#2
hawaiianboy BURNOUT Join Date: Jul 2005 Location: Michigan Posts: 697 iTrader: (1)	do you have any pics of it installed and so you dont have to take apart the oem unit? Thanks __________________

07-02-2006, 10:16 PM	#4
dachusa Silver Speeder Join Date: Feb 2006 Location: Boise, ID Posts: 672 iTrader: (9)	what colors do they come in? Is it just red, silver and blue? __________________

07-02-2006, 08:26 PM	#3
wrleo Registered User Join Date: Feb 2006 Location: SF Posts: 154 iTrader: (3)	This unit installs on top of your OEM Throttle rotor . Dont need to remove the OEM one.

07-02-2006, 11:41 PM	#5
vegeta4ss gt-s owner since 02' Join Date: Sep 2004 Location: Charlotte, NC Posts: 7,942 iTrader: (100)	so basically this thing will let you make the throttle cable super tight while staying at that closed position to keep idle from going thru the roof? Have you sold any of these to celly members of this board? I know you said you have put them on cellys before but anyone's from nc.org? __________________ Want To Buy 03+ Front and Rear seatbelts plus latches OEM steering wheel For Sale o2 sensor, amp, hid bulbs, oem parts, etc

07-02-2006, 11:49 PM	#6
Ch33z Im Rick James Bitch! Join Date: Jun 2005 Location: Durango, CO - Dallas, TX Posts: 4,042 iTrader: (72)	can we get a better explanation on how this will reduce the turning ratio of the throttle cable by %50? i just cant seem to picture it in my head..thanks __________________

07-03-2006, 12:00 AM	#7
vegeta4ss gt-s owner since 02' Join Date: Sep 2004 Location: Charlotte, NC Posts: 7,942 iTrader: (100)	I am trying to picture it too and from what I am thinking I will have to let the cable out a LOT to reach anything but the lowest insert spot __________________ Want To Buy 03+ Front and Rear seatbelts plus latches OEM steering wheel For Sale o2 sensor, amp, hid bulbs, oem parts, etc

07-03-2006, 02:18 PM	#8
hawaiianboy BURNOUT Join Date: Jul 2005 Location: Michigan Posts: 697 iTrader: (1)	True, anybetter explanations? __________________

07-03-2006, 02:34 PM	#9
Carbonized_GT ASE Certified Moron Join Date: Feb 2005 Location: Lompoc, CA Posts: 11,322 iTrader: (6)	im in the area, i can be a tester if needed.. __________________ Hellafunctional- For the 'haters' like me. Rx8 For Sale

07-03-2006, 04:50 PM	#10
grimreaper253 Registered User Join Date: Apr 2006 Location: upstate ny, lima ohio Posts: 408 iTrader: (11)	i have one i my car, it was realy easy to install and i noticed a little bit better throttle response.

07-03-2006, 06:04 PM	#11
vegeta4ss gt-s owner since 02' Join Date: Sep 2004 Location: Charlotte, NC Posts: 7,942 iTrader: (100)	anyone else with experience on this part? __________________ Want To Buy 03+ Front and Rear seatbelts plus latches OEM steering wheel For Sale o2 sensor, amp, hid bulbs, oem parts, etc

07-03-2006, 06:06 PM	#12
jlitman (Anti)Social Psychologist Join Date: Oct 2004 Location: Tampa, FL Posts: 10,977 iTrader: (38)	I'm interested too -- I think if WR offers one to a local for testing and review, a lot of folks would be interested if it is found to work well __________________ 2010 Fairlady Z34

07-03-2006, 06:14 PM	#13
Carbonized_GT ASE Certified Moron Join Date: Feb 2005 Location: Lompoc, CA Posts: 11,322 iTrader: (6)	=D im local. __________________ Hellafunctional- For the 'haters' like me. Rx8 For Sale

Sponsored Links
Google Support the Forums

07-03-2006, 10:52 PM	#14
wrleo Registered User Join Date: Feb 2006 Location: SF Posts: 154 iTrader: (3)	Anyone who is local can come by and try one out.. Just ask for RAY. If you like it you can buy it. We also offer dyno time for anyone intrested. While your there you can check out the Race Header also.

07-03-2006, 10:53 PM	#15
wrleo Registered User Join Date: Feb 2006 Location: SF Posts: 154 iTrader: (3)	The throttle rotor installs in 30 minutes, sliding on top of your OEM unit. This product is made of AL6061 Billet Aluminum and then Hard Anodized. The WR Throttle Rotor is Computer Designed to reduce the turning ratio of your throttle body rotor, to increase throttle response and reduce the time it takes your car to get to FULL THROTTLE by 50%.

07-03-2006, 11:24 PM	#16
Carbonized_GT ASE Certified Moron Join Date: Feb 2005 Location: Lompoc, CA Posts: 11,322 iTrader: (6)	where are you guys located so i can swing by later this week. __________________ Hellafunctional- For the 'haters' like me. Rx8 For Sale

07-05-2006, 11:45 PM	#18
fastcelicagt22 Registered User Join Date: Oct 2004 Location: Columbus, Ohio Posts: 1,013 iTrader: (6)	you cant tighten your throttle cable by that much. maybe 5-10%

07-06-2006, 12:42 AM	#19
TRlPPlN im a looser Join Date: May 2001 Location: Bay Area, Cali. Posts: 6,546 iTrader: (18)	not too far from san mateo alex. its at ssf. an exit almost after 380-280 junction. __________________ "Trend" It's okay if you follow it. "If you ain't stickin out you missin out."

07-06-2006, 12:46 AM	#20
Carbonized_GT ASE Certified Moron Join Date: Feb 2005 Location: Lompoc, CA Posts: 11,322 iTrader: (6)	their website doesnt even show their address. __________________ Hellafunctional- For the 'haters' like me. Rx8 For Sale

07-06-2006, 09:28 AM	#21
vegeta4ss gt-s owner since 02' Join Date: Sep 2004 Location: Charlotte, NC Posts: 7,942 iTrader: (100)	you guys gotta find that place so we can see if this is bogus or worthwhile. I mean for 30 bucks i dont expect much, but maybe WR can prove me wrong. In the past I have been weary of any of their products, but since the release of this race header..maybe these guys can start turning out good parts for all of us to benefit. __________________ Want To Buy 03+ Front and Rear seatbelts plus latches OEM steering wheel For Sale o2 sensor, amp, hid bulbs, oem parts, etc

07-07-2006, 06:44 AM	#23
Speed4TheNeed Project #1 All Motor Join Date: Jul 2004 Location: New Orleans, LA Posts: 4,470 iTrader: (20)	PayPal sent ( CAddison@bellsouth.net ) 2000 Toyota Celica GT-S and I would prefer the polished version. Thanks. I also have your race header...I'm interested in doing the 2.5" pipe conversion (instead of the 2.25") with the short pipe that's welded to the end of the flexpipe. Any info on this would be helpful. __________________ Engine: MWR Stroker kit [Crower rods, Wiseco 12.5:1 pistons, Darton dry sleeves, Toyota 1zz crank], Piper stage II camshafts, Supertech valves, Eibach valve springs, Circuitworx O/P gear, Moroso oil pan, TRD RACE header, AEM CAI, TRD Kazuma exhaust, MWR main & rod bearing sets, ES motor mount inserts, Hondata IMG, UR crank, water pump, and alternator pullies, APEX'i PFC, TRD thermostat, Koyo Racing radiator, Blitz radiator hose, ARP 2ZZ complete stud set Last edited by Speed4TheNeed : 07-07-2006 at 07:06 AM.

07-14-2006, 09:58 AM	#26
dachusa Silver Speeder Join Date: Feb 2006 Location: Boise, ID Posts: 672 iTrader: (9)	Bump. Any news on dyno? __________________

07-15-2006, 08:39 PM	#28
TRD-CELICA-GT02 Toyota Enthusiast Join Date: Mar 2002 Location: SoCal Posts: 3,001 iTrader: (15)	Keep us updated on the results Caleb once you install it. I'm interested in this too but want to know if it's worth purchasing. __________________ 5-Speed Lexus IS300

07-21-2006, 09:13 PM	#30
vegeta4ss gt-s owner since 02' Join Date: Sep 2004 Location: Charlotte, NC Posts: 7,942 iTrader: (100)	Leo are these still available? I was hoping for some more information from others that own this product, but i dont think its going to be available. Send me a PM and let me know the status of this sale. __________________ Want To Buy 03+ Front and Rear seatbelts plus latches OEM steering wheel For Sale o2 sensor, amp, hid bulbs, oem parts, etc

07-24-2006, 05:44 PM	#31
northvibe Registered User Join Date: Apr 2006 Location: Minnesota Posts: 92 iTrader: (0)	Yeah any update on people that have used it and if they are still available wrleo?

07-27-2006, 03:35 PM	#33
grimreaper253 Registered User Join Date: Apr 2006 Location: upstate ny, lima ohio Posts: 408 iTrader: (11)	i can post some pics up tommorow of it. i installed it on my 03 gt

08-03-2006, 10:53 AM	#34
R0ME02984 www.teammenace.com Join Date: Apr 2003 Location: Bellevue, WA Posts: 2,226 iTrader: (15)	Pics? __________________ 2000 Toyota Celica GTS Turbo ::Boosted Reality::

08-03-2006, 12:04 PM	#35
Ch33z Im Rick James Bitch! Join Date: Jun 2005 Location: Durango, CO - Dallas, TX Posts: 4,042 iTrader: (72)	yooooooooo....we need pics and more infooooooooo __________________

08-03-2006, 01:20 PM	#37
vegeta4ss gt-s owner since 02' Join Date: Sep 2004 Location: Charlotte, NC Posts: 7,942 iTrader: (100)	yeah where's some pics? __________________ Want To Buy 03+ Front and Rear seatbelts plus latches OEM steering wheel For Sale o2 sensor, amp, hid bulbs, oem parts, etc

08-03-2006, 03:07 PM	#38
wrleo Registered User Join Date: Feb 2006 Location: SF Posts: 154 iTrader: (3)	i have sent out like 10 sets already no one can take some pictures?

08-03-2006, 04:03 PM	#39
crasher2 Registered User Join Date: Jul 2002 Location: Pismo Beach, CA Posts: 244 iTrader: (3)	I saw something like this listed on ebay a few months back. I could never get an email back on how it worked, would really like a good clear explaintion on this.

08-03-2006, 05:19 PM	#40
itz smokin SYTFU Join Date: May 2005 Location: Bay Area, CA Posts: 220 iTrader: (0)	whoever purchased one, please give us some feedbacks on it. thanks __________________ sytfu.com -

08-03-2006, 08:03 PM	#41
wrleo Registered User Join Date: Feb 2006 Location: SF Posts: 154 iTrader: (3)	The clear explaination is on our website. I will post some pictures of it installed in the next few days.