Replacement Remote for Stock Alarm by Ralph Ewig (voidhawk)

Hi there, I recently had to add a replacement remote to the stock alarm system on my celi. My dealer wanted like $200 for it ($150 for the remote + $50 for the install). Fortunately, I got the remote of ebay for $10, and a kind soul on nc.org had instructions on how to program it. I thought it might make a good addition to the install section. Info follows... Ralph (aka voidhawk) 1) Getting a Replacement Remote Look on ebay or google, make sure the remote has the following FCC-ID: bab237131-056 2) Installing the remote (credit to iPal) 1 open door, take key out... 2 insert and remove key from ignition 2 times 3 close and open driver's door 2 times 4 insert and remove key from ignition 5 close and open driver's door 2 times 6 insert key into ignition 7 close door 8 turn ignition from 'lock' to 'on' and back to 'lock' if you do step #8 *1 time it's for add mode *2 times for rewrite mode *3 times for confirmation mode *4 times for prohibition mode 9 remove key 10 then door lock will cycle 'lock' and 'unlock' a number of times corresponding to your key cycles in step #8 11 press lock and unlock button together for 1 ~ 1.5 sec then release 12 then within 3 sec press lock button for 1 sec then release 13 if you did correctly door lock will cycle once... if wrong, twice... then do it over...