Grillcraft Grill Install by Larry D

Tools Required: Grillcraft Grill Included Hardware Drill Phillips Head Screw Driver

This is a really easy install... All you have to do is drill 3 holes on the front lip and sides, place the grill in place and screw it in.. hard huh?? well its a little time consuming and you have to line up the holes right so here it is in a little better detail..

Here are some pics You can see by these pictures where we drilled the holes to mount the grill. What I did was put the grill into place, lay under the front lip of the car and use a punch to mark where I was going to be drilling the holes.. Once all the holes were marked we removed the grill and drilled the holes. Now that the holes were there we put the grill back into place. I laid under the bumper once again and put the screws into the holes, now the fun part. You can use a Phillips head screw driver but I wanted to use the big drill to make it easier, it was a little difficult moving that big drill under the bumper and what not but it can be accomplished. I started the screws through the holes and attached the nuts to the back of the screws and finished screwing it in. I know there is a little more to it than this but its all really self explanitory.. If you have any questions on how to install it that I didnt cover feel free to ask me via email at larrydougherty@yahoo.com :)

Here are some pics of the before and after

Interested In Purchasing, Click Here for a dealer near you..