[GTpiMp]

Will these fit on my Celi?

 

[StreetFighter]

You'll probably need spacers. Try to find +35.

 

[coOOlcelica]

thats a really high offset dont think it will even clear you callipers without any spacers got with an offset between 30-35

 

[nyoneway]

Those are made for WRX's. The highest offset you can fit without rubbing is around 43mm.

 

[GTpiMp]

hmmmm thats not good news for me ...

what are spacers and how much are they gonna set me back?

 

[GTpiMp]

ok i've got a set of 5mm spacers and I'm gonna try them on the car ...

So that should bring it down to around +43mm right?

 

[coOOlcelica]

good luck

why you must have those wheels i dont get it?

are you getting them for a really good deal or something

 

[GTpiMp]

already bought em

 

[coOOlcelica]

oh ok gotchya

 

[nyoneway]

already bought em

You should be ok. 5mm = .2 inch, so you probably don't need new studs.

 

[StreetFighter]

Isn't 43mm still kinda high? Stock is 39mm.

 

[GTpiMp]

Isn't 43mm still kinda high? Stock is 39mm.

yah do u think they're gonna look weird?

 

[nyoneway]

Like I said, .5mm is only 1/5 of a inch. You can't tell.

 

[coOOlcelica]

IMO...they will look a little weird too tucked in

 

[GTpiMp]

has anyone heard of any problems associated with using spacers?

noise or wobbly wheels?

 

[GTpiMp]

ok we tried them tonite and theyre not gonna work.

Because we had to add the spacers, the bolts arent long enough for the lugnuts to grab (they do but only spin twice)

SOOOO ... now I'm lookin for another set of rims ...

 

[DYI01]

i have my 5zigen fn-01-r's in 17x7 in a +48 offset and they fit fine. Although they sit in a little, you cant really even see that they sit in. They clear the calipers, but they rub a little at full steering lock. Im planning to get a set of 5mm spacers to cure the rubbing though.

 

[tofu]

i would get the 15mm spacers...i have 42 offset and 15 gets it just about flush.

 

[coOOlcelica]

tofu you have 15 mm spacers ?

also do you have pics of your wheels and the spacers?

 

[skamikaze]

tofu how hard was it to install the H&R 15mm spacers?