NewCelica.org Forum banner
1 - 20 of 29 Posts

·
Registered
Joined
·
3,620 Posts
Discussion Starter · #1 ·
I bought celica Hyper Rev Book vol87 No.2

was flipping pages came across this header for 2zz-ge

anybody have any info on it or can read japanese to see what it says

Pic:




 

·
Registered
Joined
·
3,620 Posts
Discussion Starter · #3 ·
it say 168000 Yen so about $1650 right?

no one has it?
is it street legal?
can I pass emissions?
any gains?

This Hyper Rev Celica book is sick So many sick celcias?
 

·
Vendor
Joined
·
15,564 Posts
kortik said:
it say 168000 Yen so about $1650 right?

no one has it?
is it street legal?
can I pass emissions?
any gains?

This Hyper Rev Celica book is sick So many sick celcias?
No-one in the US that posts here has one

No its not street legal - it eliminates the cat.

You can pass emissions only if they do OBD2 test only and you have a functional double defouler setup going

Any gains???? No-one has one - how the hell would anyone know?

I would guess by looking at the design that it ought to do quite well, but who knows.
 

·
Vendor
Joined
·
15,564 Posts
fastcelicagt22 said:
looks like the same kinda design as the weapen-r header.

In that they are shiny? Because other than that they look very different...

Pulsar1 said:
^
They look nothing alike.

+1
 

·
Registered
Joined
·
1,516 Posts
Has anyone actually dynoed the Brashboy and TRD 4-2-1 race headers, would be interesting to see how they compaire to the weapon-r header.
 

·
Registered
Joined
·
852 Posts
Seven-Of-Nine said:
Has anyone actually dynoed the Brashboy and TRD 4-2-1 race headers, would be interesting to see how they compaire to the weapon-r header.
Refer to posts #2 and #4,

The only commonly known person with a TRD header is Caleb (Speed4theNeed), and we all know his car is not assembled. . . So, it would be pretty pointless to compare the TRD, (since you'll probably never own one).

It would be nice just to get a third party dyno of the WR header. Or a comparison of the 2.25 and 2.5 collectors. If one exists please post a link.
 

·
Vendor
Joined
·
15,564 Posts
Redundant question

Seven-Of-Nine said:
Has anyone actually dynoed the Brashboy and TRD 4-2-1 race headers, would be interesting to see how they compaire to the weapon-r header.
Boosted2.0 said:
kortik said:
it say 168000 Yen so about $1650 right?

no one has it?
is it street legal?
can I pass emissions?
any gains?

This Hyper Rev Celica book is sick So many sick celcias?
No-one in the US that posts here has one

No its not street legal - it eliminates the cat.

You can pass emissions only if they do OBD2 test only and you have a functional double defouler setup going

Any gains???? No-one has one - how the hell would anyone know?

I would guess by looking at the design that it ought to do quite well, but who knows.
:)
 

·
Registered
Joined
·
1,039 Posts
Was a general statement. what i mean is that they are similar in style as i view the wr race header in this picture. obviously the weapon r seems to be longer but i offer that the brash header is the same length as otherwise seen in the picture, because if they both replace the cat then they would meet up in the same place after the cat. maybe im wrong, but they seem similar to me. the brash is two peices unlike the weapon r, but again i question the general photo of the brashboy header.


Boosted2.0 said:
In that they are shiny? Because other than that they look very different...




+1
 

·
Registered
Joined
·
3,620 Posts
Discussion Starter · #13 · (Edited)
did you guys see that they have complete 2.0L kit for 2zz engine.
is it worth the power/money?

http://www.brashboy.net/english/compEG/main.html

plus is that the cams for 2zz also?

plus exhuast manifold for 2zz also

http://www.brashboy.net/english/toyota/zzw30/zzw30.html



2.0L stroker kit plus supercharged?
http://www.brashboy.net/superchager/main.html

Looke what they have done to the 2zz equiped cars

Alex/Runx corolla supercharged Impressive>
http://www.brashboy.net/english/autosalon/index.html

and Lotus Elise
but its not on the enlish side:
http://www.brashboy.net/autosalon/index.html

One question if we put a stroker kit do we lose Lift?
 

·
Registered
Joined
·
1,160 Posts
they are different look at the brash boy its a 2 pice header if you look closely.there are the 4 long tubes then the 4 tubes come together forming 2 parallel tubes then bolts up to form 2 complete parallel tubes. when the WR is all one pice and goes from 4 to 1 it looks like. correct me if im wrong but look! it actually looks like it would give good gains but thats just me. mabey someone should research this header looks good or make a look a like for cheaper.


 

·
Registered
Joined
·
3,620 Posts
Discussion Starter · #15 ·
which one looks like that will give good gains WR or Brashboy?
 

·
Vendor
Joined
·
15,564 Posts
mistabones said:
Yup - its a solid 4-2-1 design. Should be quite nice, brashboy's stuff usually is. (Its also usually very pricey)
 

·
Registered
Joined
·
1,160 Posts
to bad MWR can not get a hold of it and see if it has gains. but they do not have a N/A celica just there turbo beast!
 

·
Registered
Joined
·
88 Posts
kortik said:
did you guys see that they have complete 2.0L kit for 2zz engine.
is it worth the power/money?

http://www.brashboy.net/english/compEG/main.html

plus is that the cams for 2zz also?

plus exhuast manifold for 2zz also

http://www.brashboy.net/english/toyota/zzw30/zzw30.html



2.0L stroker kit plus supercharged?
http://www.brashboy.net/superchager/main.html

Looke what they have done to the 2zz equiped cars

Alex/Runx corolla supercharged Impressive>
http://www.brashboy.net/english/autosalon/index.html

and Lotus Elise
but its not on the enlish side:
http://www.brashboy.net/autosalon/index.html

One question if we put a stroker kit do we lose Lift?
Unless I am missreading something, does it not say that the corolla you linked to is twin-charged? It says they added a supercharger and turbine.
 
1 - 20 of 29 Posts
Top