NewCelica.org Forum banner
1 - 13 of 13 Posts

· Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
I put in a CAI about 9 months ago and finally read the bluebomber mod so I did that and everything fit good. When I put it all back in and started the engine it revs up to the idle and then quickly slows down then stalls out. If I rev up the gas it is responsive but then quickly goes down and stalls out. I was worried if water got in so I took out the spark plug and turned over the engine, nothing came out so I realized that's not the problem, I put it all back together and same result. Here's a video for reference.
http://www.youtube.com/watch?v=Q44vwA59RuU
 

· Electromagnetic Wave :-h
Joined
·
16,070 Posts
Reset the ECM? It has to learn new idle data.
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top