NewCelica.org Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
255 Posts
Discussion Starter #1
I know I need to remove all the screws in order to take off the bumper...
but where are they?
is there any CLEAR INSTRUCTIONS w/ pics????

Thanks
 

·
Registered
Joined
·
312 Posts
piece of cake. Look for every screws u find screwed onto the bumper and simply unscrew them...easy stuff..
 

·
Registered
Joined
·
232 Posts
don't forget about the single hidden screw on each side of the bumper near the fenderwell... you have to peel the plastic innerwell back a bit and use an extension on a ratchet... 10mm i believe... mine came off nice with just a tug to release the male/female bar thingie... 15 min tops
 

·
Registered
Joined
·
2,126 Posts
Four screws and a pin under the hood. about 10 screws and nuts under neath and one inside each fender well. All use 10mm wrench or socket to get too.
 

·
Registered
Joined
·
1,654 Posts
and you have to pull each side evenly(i would think) because there are 2 push slots(i guess that is what you call it) where it snaps in place when you push your bumper on and vice versa
 
1 - 7 of 7 Posts
Top